... A Vital Part of Connection World CMPTER. Cable Connectors Receptacles With Solder End Protective Caps N CONNECTORS
|
|
|
- Clarissa Owens
- 5 years ago
- Views:
Transcription
1 ... A Vital Part of Connection World Cable Connectors Receptacles With Solder End Protective Caps N CONNECTORS COPYRIGHT ELECTRONICS 00
2 Type N 50 Ohm Coaxial Connectors DESCRIPTION The development of the Type N connector by the United States Army/Navy ran directly parallel to theescalation of U.S. involvement in WWII. It was finally released in 94, shortly after the U.S. officially ment field and join the coaxial cable of the radio frequency extensively entered the war, and since that time it has been a staple in RF and Microwave applications all over the world. Due to N type connectors joins by one whorl, it has the characteristic of raliable and strong ant-vibration nature, machinery and electric performance finely. It is used in vibration and environment abominable radio equipment of terms and instrument and ground launch system join the coaxial cable of the radion frequency extensively. CONTENTS Description... Interface dimensions... Technical data... 3 Cable connectors... 4 Receptacles with solder end... PCB connectors... 4 Protective cap... 5 Assembly instruction... 6 Mounting hole... Tel : Fax : sales@cmpter.com Website: #45 ZhongShan East Road, ZhenJiang 003, JiangSu, China
3 Type N INTERFACE PLUG JACK LETTER mm inch mm inch LETTER min. max. min. max. min. max. min. max. A A B B C C D D E E F F G G DIA H DIA H DIA J DIA J DIA K DIA K DIA L DIA L DIA M DIA Interface dimensions conformable to the standards: International: IEC669-6 Europe: CECC 0 USA: MIL-STD-348A/304, IP rating (interface, mated) IP68 Tel : Fax : sales@cmpter.com Website: #45 ZhongShan East Road, ZhenJiang 003, JiangSu, China
4 TECHNICAL DATA ELECTRICAL DATA Impedance Frequency range Dielectric withsanding voltage V.S.W.R. Insulation resistance Contact resistance RF leakage 50 Ohm DC 0 GHz,500 volts rms straight connectors:.3 max 0- GHz; right angle connectors:.35 max 0- GHz 5*000 MΩ Contact.0 mω Outer Contact.0 mω -90 db minimum at 3 GHz MECHANICAL DATA Braid/Jacket Cable Affixment Conductor Cale Affixment Mating Assembly Torque (body/clamp nut) Crimps: hex braid crimp;clamps:screw-thread nut and braid clamp Crimp: crimp or solder;all others: solder only 5/8-4 threaded coupling 8/ lb-ft (5/30 N-m) MATERIAL DATA Male Contact Female contact Gasket Crimp Ferrule Brass, silver or gold plated Phosphorous bronze or beryllium copper, silver or gold plated Other Metal Parts Brass Silicone rubber Copper ENVIRONMENTAL Temperature Range Thermal shock Moisture resistance Corrosion Vibration TFE: -65 C to +65 C MIL-STD-0, method 07, test condition A- MIL-STD-0, method 06 MIL-STD-0, method 0, test condition B MIL-STD-0, Method 04, Condition D Tel : Fax : sales@cmpter.com Website: #45 ZhongShan East Road, ZhenJiang 003, JiangSu, China 3
![] 50-03-M-00 Semi-rigid.086/RG405 A0 Cable entry soldered 3.50 [.95] 3.50 [.38].](/docs-images/81/84571177/images/5-1.jpg "0 [.087 DIA.] 50-03-M3-003 Semi-rigid.50 A0 Cable entry soldered 3.60 [.99] 6.")
![50 [.56 DIA.] SW 9 [.750 HEX.](/docs-images/81/84571177/images/5-2.jpg "] Tel : +86-5-8443 63 Fax : +86-5-8698 88 Email : sales@cmpter.com Website: www.")
5 CABLE CONNECTORS Straight cable plugs (male) RoHS M06-00 Semi-rigid.4/RG40 A0 Cable entry soldered 4.00 [.945] 4.00 [.57] 3.70 [.46 DIA.] M-00 Semi-rigid.086/RG405 A0 Cable entry soldered 3.50 [.95] 3.50 [.38].0 [.087 DIA.] M3-003 Semi-rigid.50 A0 Cable entry soldered 3.60 [.99] 6.50 [.56 DIA.] SW 9 [.750 HEX.] Tel : Fax : sales@cmpter.com Website: #45 ZhongShan East Road, ZhenJiang 003, JiangSu, China 4
![CABLE CONNECTORS Straight cable plugs (male) RoHS 50-03-M04-004 LMR00/RG74/RG36 A0 5.00 [.984].70 [.067 DIA.] 0.00 [.394] 3.](/docs-images/81/84571177/images/6-1.jpg "0 [.6 DIA.] 4.00 [.57] 50-03-M8-005 LMR95/RG58 A03 30.30 [.93] 3.0 [.6 DIA].70 [.500] 5.40 [.3 DIA.] 6.5 [.")
![46 DIA] 50-03-M0-006 LMR400 A03 3.50 [.80] 7.5 [.95 DIA.] 5.00 [.59] 0.90 [.49 DIA.].0 [.480 DIA.](/docs-images/81/84571177/images/6-2.jpg "] Tel : +86-5-8443 63 Fax : +86-5-8698 88 Email : sales@cmpter.")
6 CABLE CONNECTORS Straight cable plugs (male) RoHS M LMR00/RG74/RG36 A [.984].70 [.067 DIA.] 0.00 [.394] 3.0 [.6 DIA.] 4.00 [.57] M8-005 LMR95/RG58 A [.93] 3.0 [.6 DIA].70 [.500] 5.40 [.3 DIA.] 6.5 [.46 DIA] M0-006 LMR400 A [.80] 7.5 [.95 DIA.] 5.00 [.59] 0.90 [.49 DIA.].0 [.480 DIA.] Tel : Fax : sales@cmpter.com Website: #45 ZhongShan East Road, ZhenJiang 003, JiangSu, China 5
![] 50-03-M9-008 LMR600 A03 46.50 [.83].00 [.47 DIA.] 9.00 [.748] 5.50 [.60 DIA.](/docs-images/81/84571177/images/7-1.jpg "] 7.00 [.669 DAI.] 50-03-M0-009 LMR300 A03 3.00 [.0] 5.00 [.97 DIA.] 4.00 [.55] 8.")
![0 [.33 DIA.] 9.40 [.370 DIA.](/docs-images/81/84571177/images/7-2.jpg "] 6 Tel : +86-5-8443 63 Fax : +86-5-8698 88 Email : sales@cmpter.")
7 CABLE CONNECTORS Straight cable plugs (male) RoHS M0-007 LMR40 A [.8] 4. [.65 DIA.] 3.00 [.5] 6.80 [.68 DIA.] 8.00 [.35 DIA.] M9-008 LMR600 A [.83].00 [.47 DIA.] 9.00 [.748] 5.50 [.60 DIA.] 7.00 [.669 DAI.] M0-009 LMR300 A [.0] 5.00 [.97 DIA.] 4.00 [.55] 8.0 [.33 DIA.] 9.40 [.370 DIA.] 6 Tel : Fax : sales@cmpter.com Website: #45 ZhongShan East Road, ZhenJiang 003, JiangSu, China
![CABLE CONNECTORS Straight cable plugs (male) RoHS 50-03-4M04-00 LMR00/RG74/RG36 A04 3.50 [.80] Cable entry clamp SW.00 [.433 AF.] SW.00 [.433 HEX.] 50-03-4M8-0 LMR95/RG58 A04 3.50 [.80] Cable entry clamp SW.00 [.433 AF.] SW.00 [.433 HEX.] 50-03-4M0-0 LMR400 A04 Cable entry clamp 38.](/docs-images/81/84571177/images/8-0.jpg "00 [.496] SW 6.00 [.630 AF.] SW 6.00 [.630 HEX.] Tel : +86-5-8443 63 Fax : +86-5-8698 88 Email : sales@cmpter.com Website: www.cmpter.com #45 ZhongShan East Road, ZhenJiang 003, JiangSu, China 7")
8 CABLE CONNECTORS Straight cable plugs (male) RoHS M04-00 LMR00/RG74/RG36 A [.80] Cable entry clamp SW.00 [.433 AF.] SW.00 [.433 HEX.] M8-0 LMR95/RG58 A [.80] Cable entry clamp SW.00 [.433 AF.] SW.00 [.433 HEX.] M0-0 LMR400 A04 Cable entry clamp [.496] SW 6.00 [.630 AF.] SW 6.00 [.630 HEX.] Tel : Fax : sales@cmpter.com Website: #45 ZhongShan East Road, ZhenJiang 003, JiangSu, China 7
![80 [3.8] Cable entry clamp 40.00 [.575 DIA.] SW 9.00 [.748 HEX.] SW 36.00 [.47 AF.](/docs-images/81/84571177/images/9-1.jpg "] SW 36.00 [.47 AF.] 50-03-4M6-039 /'' Cable A06 6.80 [.47] Cable entry clamp.30 [.878 DIA.")
![] SW 9.00 [.748 AF.] SW 0.00 [.787 AF.](/docs-images/81/84571177/images/9-2.jpg "] 8 Tel : +86-5-8443 63 Fax : +86-5-8698 88 Email : sales@cmpter.")
9 CABLE CONNECTORS Straight cable plugs (male) RoHS M9-03 LMR600 A [.79] Cable entry clamp.00 [.866 DIA.] SW 0.00 [.787 AF.] SW 0.00 [.787 AF.] M /8'' Cable A [3.8] Cable entry clamp [.575 DIA.] SW 9.00 [.748 HEX.] SW [.47 AF.] SW [.47 AF.] M6-039 /'' Cable A [.47] Cable entry clamp.30 [.878 DIA.] SW 9.00 [.748 AF.] SW 0.00 [.787 AF.] 8 Tel : Fax : sales@cmpter.com Website: #45 ZhongShan East Road, ZhenJiang 003, JiangSu, China
![80 [.34].65 [.065 DIA.] 9.50 [.768] 0.00 [.394] 3.0 [.6 DIA.] 4.00 [.57 DIA.](/docs-images/81/84571177/images/10-1.jpg "] 50-3-M0-08 LMR40 A08 3.50 [.40] 4. [.65 DIA.] 5.00 [.59 DIA.] 5.00 [.984] 3.00 [.5] 6.")
![80 [.68 DIA.] 8.00 [.35 DIA.] Tel : +86-5-8443 63 Fax : +86-5-8698 88 Email : sales@cmpter.](/docs-images/81/84571177/images/10-2.jpg "com Website: www.cmpter.com #45 ZhongShan East Road, ZhenJiang 003, JiangSu, China 9")
10 CABLE CONNECTORS Right angle cable plugs (male) RoHS 50-3-M06-06 RG40/Semi-rigid.4 A [.4] Cable entry soldered 9.50 [.374] 3.70 [.46 DIA.] 4.5 [.955] 9.50 [.374] 50-3-M04-07 LMR00/RG74/RG36 A [.34].65 [.065 DIA.] 9.50 [.768] 0.00 [.394] 3.0 [.6 DIA.] 4.00 [.57 DIA.] 50-3-M0-08 LMR40 A [.40] 4. [.65 DIA.] 5.00 [.59 DIA.] 5.00 [.984] 3.00 [.5] 6.80 [.68 DIA.] 8.00 [.35 DIA.] Tel : Fax : sales@cmpter.com Website: #45 ZhongShan East Road, ZhenJiang 003, JiangSu, China 9
![CABLE CONNECTORS Right angle cable plugs (male) RoHS 50-3-M0-09 LMR400 A08 3.00 [.60] 7.5 [.](/docs-images/81/84571177/images/11-0.jpg "95 DIA.] 8.50 [.] 5.00 [.59] 0.90 [.49 DIA.].0 [.480 DIA.] 50-3-4M0-00 LMR400 A04 7.50 [.689] 58.")
![0 [.9] Cable entry clamp 39.40 [.55] SW 6.00 [.630 AF.] SW 6.00 [.630 HEX.] 8.00 [.709 DIA.](/docs-images/81/84571177/images/11-1.jpg "] 50-3-4M6-04 /'' Cable A06 65.75 [.589] Cable entry clamp 35.40 [.394] 7.50 [.689] SW 9.00 [.")
![748 HEX.] SW 9.00 [.748 HEX.].30 [.878 DIA.](/docs-images/81/84571177/images/11-2.jpg "] Tel : +86-5-8443 63 Fax : +86-5-8698 88 Email : sales@cmpter.")
11 CABLE CONNECTORS Right angle cable plugs (male) RoHS 50-3-M0-09 LMR400 A [.60] 7.5 [.95 DIA.] 8.50 [.] 5.00 [.59] 0.90 [.49 DIA.].0 [.480 DIA.] M0-00 LMR400 A [.689] 58.0 [.9] Cable entry clamp [.55] SW 6.00 [.630 AF.] SW 6.00 [.630 HEX.] 8.00 [.709 DIA.] M6-04 /'' Cable A [.589] Cable entry clamp [.394] 7.50 [.689] SW 9.00 [.748 HEX.] SW 9.00 [.748 HEX.].30 [.878 DIA.] Tel : Fax : sales@cmpter.com Website: #45 ZhongShan East Road, ZhenJiang 003, JiangSu, China 0
![46 DIA] 50-0-M0-03 LMR400 A03 33.30 [.3] 7.5 [.95 DIA.] 5.00 [.59] 5/8-4UNEF-A 0.](/docs-images/81/84571177/images/12-1.jpg "90 [.49 DIA.].0 [.480 DIA.] 50-0-M0-04 LMR40 A03 5/8-4UNEF-A 9.80 [.73] 4. [.65 DIA.")
![] 3.00 [.5] 6.80 [.68 DIA.] 8.00 [.35 DIA.](/docs-images/81/84571177/images/12-2.jpg "] Tel : +86-5-8443 63 Fax : +86-5-8698 88 Email : sales@cmpter.com Website: www.")
12 CABLE CONNECTORS Straight cable jacks (female) RoHS 50-0-M8-0 RG58/LMR95 A03 5/8-4UNEF-A 7.80 [.094] 3.0 [.6 DIA].70 [.500] 5.40 [.3 DIA.] 6.5 [.46 DIA] 50-0-M0-03 LMR400 A [.3] 7.5 [.95 DIA.] 5.00 [.59] 5/8-4UNEF-A 0.90 [.49 DIA.].0 [.480 DIA.] 50-0-M0-04 LMR40 A03 5/8-4UNEF-A 9.80 [.73] 4. [.65 DIA.] 3.00 [.5] 6.80 [.68 DIA.] 8.00 [.35 DIA.] Tel : Fax : sales@cmpter.com Website: #45 ZhongShan East Road, ZhenJiang 003, JiangSu, China
![50 [.398] Cable entry clamp 5/8-4UNEF-A 5.90 [.66 DIA.] SW.00 [.433 AF.] SW.00 [.433 HEX.](/docs-images/81/84571177/images/13-1.jpg "] 50-0-4M6-07 /'' Cable A06 56.80 [.36] Cable entry clamp SW 9.00 [.748 HEX.] SW 9.00 [.748 HEX.] 5/8-4UNEF-A.")
![30 [.878 DIA.] Tel : +86-5-8443 63 Fax : +86-5-8698 88 Email : sales@cmpter.com Website: www.](/docs-images/81/84571177/images/13-2.jpg "cmpter.com #45 ZhongShan East Road, ZhenJiang 003, JiangSu, China")
13 CABLE CONNECTORS Straight cable jacks (female) RoHS M0-05 LMR400 A04 Cable entry clamp 4.40 [.630] 8.00 [.709 DIA.] 5/8-4UNEF-A SW 6.00 [.630 AF.] SW 6.00 [.630 AF.] M8-06 LMR95/RG58 A [.398] Cable entry clamp 5/8-4UNEF-A 5.90 [.66 DIA.] SW.00 [.433 AF.] SW.00 [.433 HEX.] M6-07 /'' Cable A [.36] Cable entry clamp SW 9.00 [.748 HEX.] SW 9.00 [.748 HEX.] 5/8-4UNEF-A.30 [.878 DIA.] Tel : Fax : sales@cmpter.com Website: #45 ZhongShan East Road, ZhenJiang 003, JiangSu, China
![CABLE CONNECTORS Straight bulkhead cable jacks (female) RoHS Mount Hole 50-0-D8-08 RG58/LMR95 A03 M0 35.0 [.386].00 [.](/docs-images/81/84571177/images/14-0.jpg "866] MAX. 7.00 [MAX..76].00 [.866] 5/8-4UNEF-A 3.0 [.6 DIA.].70 [.500] 5.40 [.3 DIA.] 6.5 [.46 DIA] SW 3.50 [.")
![53 AF] Mount Hole 50-0-D04-09 LMR00/RG74/RG36 A0 M0 3.0 [.8] 9.50 [.768] MAX. 4.50 [MAX..77].00 [.866] 5/8-4UNEF-A.70 [.](/docs-images/81/84571177/images/14-1.jpg "067 DIA.] 0.00 [.394] 3.0 [.6 DIA.] 4.00 [.57] SW 3.50 [.")
![53 AF] Mount Hole 50-0-D06-030 LMR40 A09 M0 Cable entry soldered 33.0 [.307].00 [.866] MAX. 7.00 [MAX..76].00 [.866] 5/8-4UNEF-A 3.](/docs-images/81/84571177/images/14-2.jpg "70 [.46 DIA.] SW 3.50 [.53 AF] SW 3.50 [.53 AF] Tel : +86-5-8443 63 Fax : +86-5-8698 88 Email : sales@cmpter.")
14 CABLE CONNECTORS Straight bulkhead cable jacks (female) RoHS Mount Hole 50-0-D8-08 RG58/LMR95 A03 M [.386].00 [.866] MAX [MAX..76].00 [.866] 5/8-4UNEF-A 3.0 [.6 DIA.].70 [.500] 5.40 [.3 DIA.] 6.5 [.46 DIA] SW 3.50 [.53 AF] Mount Hole 50-0-D04-09 LMR00/RG74/RG36 A0 M0 3.0 [.8] 9.50 [.768] MAX [MAX..77].00 [.866] 5/8-4UNEF-A.70 [.067 DIA.] 0.00 [.394] 3.0 [.6 DIA.] 4.00 [.57] SW 3.50 [.53 AF] Mount Hole 50-0-D LMR40 A09 M0 Cable entry soldered 33.0 [.307].00 [.866] MAX [MAX..76].00 [.866] 5/8-4UNEF-A 3.70 [.46 DIA.] SW 3.50 [.53 AF] SW 3.50 [.53 AF] Tel : Fax : sales@cmpter.com Website: #45 ZhongShan East Road, ZhenJiang 003, JiangSu, China 3
![CABLE CONNECTORS Straight panel cable jacks(female) RoHS Mount Hole 50-0-8F8-03 LMR95/RG58 A03 M0 5/8-4UNEF-A 8.70 [.736].00 [.](/docs-images/81/84571177/images/15-0.jpg "079] 7.0 [.07] 3.0 [.6 DIA.] 5.40 [.000 SQ.] 8.5 [.79] 4-3.5 [.8 DIA.] 8.5 [.79].70 [.500] 5.40 [.3 DIA.] 6.5 [.46 DIA] Mount Hole 50-0-8F0-03 LMR400 A03 M0 5/8-4UNEF-A 33.")
![00 [.99] 8.70 [.736] 5.40 [.000 SQ.].00 [.079] 8.5 [.79] 7.5 [.95 DIA.] 4-3.5 [.8 DIA.] 8.5 [.79] 5.00 [.59] 0.90 [.49 DIA.].0 [.480 DIA.](/docs-images/81/84571177/images/15-1.jpg "] Mount Hole 50-0-8F0-033 LMR400 A04 M0 Cable entry clamp 5.40 [.000 SQ.] 8.5 [.79] 4-6.00 [.36 DIA.] 4-3.5 [.8 DIA.] 8.70 [.736].")
![00 [.079] 39.0 [.540] 8.5 [.79] 5/8-4UNEF-A SW 6.00 [.630 AF.] SW 6.00 [.630 HEX.](/docs-images/81/84571177/images/15-2.jpg "] 4 Tel : +86-5-8443 63 Fax : +86-5-8698 88 Email : sales@cmpter.com Website: www.cmpter.com #45 ZhongShan East Road, ZhenJiang 003, JiangSu, China")
15 CABLE CONNECTORS Straight panel cable jacks(female) RoHS Mount Hole F8-03 LMR95/RG58 A03 M0 5/8-4UNEF-A 8.70 [.736].00 [.079] 7.0 [.07] 3.0 [.6 DIA.] 5.40 [.000 SQ.] 8.5 [.79] [.8 DIA.] 8.5 [.79].70 [.500] 5.40 [.3 DIA.] 6.5 [.46 DIA] Mount Hole F0-03 LMR400 A03 M0 5/8-4UNEF-A [.99] 8.70 [.736] 5.40 [.000 SQ.].00 [.079] 8.5 [.79] 7.5 [.95 DIA.] [.8 DIA.] 8.5 [.79] 5.00 [.59] 0.90 [.49 DIA.].0 [.480 DIA.] Mount Hole F0-033 LMR400 A04 M0 Cable entry clamp 5.40 [.000 SQ.] 8.5 [.79] [.36 DIA.] [.8 DIA.] 8.70 [.736].00 [.079] 39.0 [.540] 8.5 [.79] 5/8-4UNEF-A SW 6.00 [.630 AF.] SW 6.00 [.630 HEX.] 4 Tel : Fax : sales@cmpter.com Website: #45 ZhongShan East Road, ZhenJiang 003, JiangSu, China
![80 [.73].7 [.050 DIA.] 4.0 [.6 DIA.] 7.50 [.689 SQ.].70 [.500].70 [.500] 4-3.0 [. DIA.].00 [.079].50 [.059] 9.50 [.374] Mount Hole 50-0-8F-036 M0 Panel mounted 5/8-4UNEF-A 7.](/docs-images/81/84571177/images/16-1.jpg "30 [.075] 5.40 [.000 SQ.] 6.80 [.66] 8.5 [.79].40 [.094 DIA.] 3.00 [.")
![8 DIA.] 4-3.5 [.8 DIA.] 8.5 [.79] 6.50 [.56].00 [.079] Tel : +86-5-8443 63 Fax : +86-5-8698 88 Email : sales@cmpter.](/docs-images/81/84571177/images/16-2.jpg "com Website: www.cmpter.com #45 ZhongShan East Road, ZhenJiang 003, JiangSu, China 5")
16 RECEPTACLES WITH SOLDER END Receptacles, jacks (female) RoHS Mount Hole F7-034 M03 Panel mounted 5/8-4UNEF-A [.37] 5.00 [.59] 9.00 [.354].60 [.063].7 [.050 DIA.] 4.0 [.6 DIA.] 7.50 [.689 SQ.].70 [.500].70 [.500] [. DIA.] Mount Hole F7-035 M03 Panel mounted 5/8-4UNEF-A 9.80 [.73].7 [.050 DIA.] 4.0 [.6 DIA.] 7.50 [.689 SQ.].70 [.500].70 [.500] [. DIA.].00 [.079].50 [.059] 9.50 [.374] Mount Hole F-036 M0 Panel mounted 5/8-4UNEF-A 7.30 [.075] 5.40 [.000 SQ.] 6.80 [.66] 8.5 [.79].40 [.094 DIA.] 3.00 [.8 DIA.] [.8 DIA.] 8.5 [.79] 6.50 [.56].00 [.079] Tel : Fax : sales@cmpter.com Website: #45 ZhongShan East Road, ZhenJiang 003, JiangSu, China 5
![RECEPTACLES WITH SOLDER END Receptacles, jacks (female) RoHS Mount Hole 50-0-8F-037 M03 Panel mounted 5/8-4 UNEF-A.00 [.866] 3.00 [.8] 7.](/docs-images/81/84571177/images/17-0.jpg "00 [.669] 0.46 [.08] 3.00 [.8 DIA.] 7.50 [.689 SQ.].70 [.500] 4-3.0 [. DIA.].70 [.500] Mount Hole 50-0-8A-038 M04 Panel mounted 6.60 [.")
![653] MAX..5 [MAX..098] 9.60 [.65].40 [.094 DIA.] 3.00 [.8 DIA.] 5/8-4UNEF-A 5/8-4UNEF-A 6.00 [.36] SW 9 [.748 HEX.].70 [.067 DIA.] 7.0 [.07] 6 Tel : +86-5-8443 63 Fax : +86-5-8698 88 Email : sales@cmpter.](/docs-images/81/84571177/images/17-1.jpg "com Website: www.cmpter.com #45 ZhongShan East Road, ZhenJiang 003, JiangSu, China")
17 RECEPTACLES WITH SOLDER END Receptacles, jacks (female) RoHS Mount Hole F-037 M03 Panel mounted 5/8-4 UNEF-A.00 [.866] 3.00 [.8] 7.00 [.669] 0.46 [.08] 3.00 [.8 DIA.] 7.50 [.689 SQ.].70 [.500] [. DIA.].70 [.500] Mount Hole A-038 M04 Panel mounted 6.60 [.653] MAX..5 [MAX..098] 9.60 [.65].40 [.094 DIA.] 3.00 [.8 DIA.] 5/8-4UNEF-A 5/8-4UNEF-A 6.00 [.36] SW 9 [.748 HEX.].70 [.067 DIA.] 7.0 [.07] 6 Tel : Fax : sales@cmpter.com Website: #45 ZhongShan East Road, ZhenJiang 003, JiangSu, China
![PROTECTIVE CAPS RoHS 50-03-9N-04 Protective cap for jacks (females) 9.70 [.776] 4 [.](/docs-images/81/84571177/images/18-0.jpg "57 DIA.] 80 [3.50] 50-0-9N-043 Protective cap for plugs (males) 0.50 [.807] 0.00 [.")
![787] 4 [.57 DIA.] 80 [3.](/docs-images/81/84571177/images/18-1.jpg "50] 5/8-4UNEF-A Tel : +86-5-8443 63 Fax : +86-5-8698 88 Email : sales@cmpter.")
18 PROTECTIVE CAPS RoHS N-04 Protective cap for jacks (females) 9.70 [.776] 4 [.57 DIA.] 80 [3.50] N-043 Protective cap for plugs (males) 0.50 [.807] 0.00 [.787] 4 [.57 DIA.] 80 [3.50] 5/8-4UNEF-A Tel : Fax : sales@cmpter.com Website: #45 ZhongShan East Road, ZhenJiang 003, JiangSu, China 7
![ASSEMBLY INSTRUCTIONS A0 Contact Stripping Dimensions a Heatshrink sleeve (option) Stripping Length (mm [in]) a 50-03-M06-00](/docs-images/81/84571177/images/19-0.jpg "Semi-rigid.4/RG40 5.0 [.97] 50-03-M-00 Semi-rigid.086/RG405 3.5 [.38] 50-03-M3-003 Semi-rigid.50 5.5 [.7]. Slide the heatshrink sleeve onto the cable (option).")
19 ASSEMBLY INSTRUCTIONS A0 Contact Stripping Dimensions a Heatshrink sleeve (option) Stripping Length (mm [in]) a M06-00 Semi-rigid.4/RG [.97] M-00 Semi-rigid.086/RG [.38] M3-003 Semi-rigid [.7]. Slide the heatshrink sleeve onto the cable (option). Strip the cable as Striping Dimensions. 4. Solder the body onto the cable.. Slide the center contact on until it bottom against the cable dielectric. Solder the center contact onto the cable. 5. Slide the heatshrink sleeve over the body and heatshrink it in place (option). 3. Slide the cable into the body until it stops. 8 Tel : Fax : sales@cmpter.com Website: #45 ZhongShan East Road, ZhenJiang 003, JiangSu, China
![ASSEMBLY INSTRUCTIONS A0 Ferrule Guide Pin Stripping Dimensions c b a Heatshrink sleeve (option) 50-03-M04-004 50-0-D04-09 LMR00/RG74/RG36 HEX. Crimp Tool (mm [in]) Stripping Length (mm [in]) 3.5 [.](/docs-images/81/84571177/images/20-0.jpg "8] 3 [.8] 3.5 [.38] a b c 3 [.5]. Slide the heatshrink sleeve onto the cable (option). Slide the ferrule onto the cable. Strip the cable as Striping Dimensions. 4.")
20 ASSEMBLY INSTRUCTIONS A0 Ferrule Guide Pin Stripping Dimensions c b a Heatshrink sleeve (option) M D04-09 LMR00/RG74/RG36 HEX. Crimp Tool (mm [in]) Stripping Length (mm [in]) 3.5 [.8] 3 [.8] 3.5 [.38] a b c 3 [.5]. Slide the heatshrink sleeve onto the cable (option). Slide the ferrule onto the cable. Strip the cable as Striping Dimensions. 4. Slide the cable into the body until stops.. Slide the guide pin on until it bottom against the cable dielectric. Solder the guide pin onto the cable Slide the ferrule over the braid. Crimp the ferrule with crimping tool (see table). 3. Fan the braid. 6. Cut the excess of braid if necessary. Slide the sleeve over the ferrule and heatshrink it in place (option). Tel : Fax : sales@cmpter.com Website: #45 ZhongShan East Road, ZhenJiang 003, JiangSu, China 9
![9 [.49] 9 [.748] 4 [.57] 50-0-8F0-03 5 [.8] LMR600 5.8 [.65] 6 [.36] 3 [.8] 3 [.906] c. Slide the heatshrink sleeve onto the cable (option). Slide the ferrule onto the cable.](/docs-images/81/84571177/images/21-1.jpg "Strip the cable as Striping Dimensions. 4. Slide the cable into the body until stops. 3. Slide the center contact on until it bottom against the cable dielectric.")
21 ASSEMBLY INSTRUCTIONS A03 Ferrule Contact Stripping Dimensions c b a Heatshrink sleeve (option) M M D F M M M9-008 HEX. Crimp Tool (mm [in]) LMR95/RG [.3] LMR [.68] a Stripping Length (mm [in]) b [.079] 3 [.8] 3.5 [.53].5 [.098] M0-009 LMR [.33] 5 [.8] 8 [.709] 3 [.8] 50-0-M [.7] M0-006 LMR [.49] 9 [.748] 4 [.57] F [.8] LMR [.65] 6 [.36] 3 [.8] 3 [.906] c. Slide the heatshrink sleeve onto the cable (option). Slide the ferrule onto the cable. Strip the cable as Striping Dimensions. 4. Slide the cable into the body until stops. 3. Slide the center contact on until it bottom against the cable dielectric. Solder the center contact onto the cable. 5. Slide the ferrule over the braid. Crimp the ferrule with crimping tool (see table). 3. Fan the braid. 6. Cut the excess of braid if necessary. Slide the sleeve over the ferrule and heatshrink it in place (option). 0 Tel : Fax : sales@cmpter.com Website: #45 ZhongShan East Road, ZhenJiang 003, JiangSu, China
![50-03-4M8-0 50-0-4M8-06 LMR00/RG74/RG36 LMR95/RG58 3 [.8] 6 [.36] 6 [.](/docs-images/81/84571177/images/22-1.jpg "36] 50-03-4M0-0 50-3-4M0-00 50-0-4M0-05 LMR400 5 [.97] [.433] [.")
![433] 450N cm 50-0-8F0-033 50-03-4M9-03 LMR600 6 [.36] 3 [.5]](/docs-images/81/84571177/images/22-2.jpg "3 [.5]. Slide the nut, the washer, the rubber and another washer onto the cable.")
22 ASSEMBLY INSTRUCTIONS A04 Washer Contact Stripping Dimensions c b Nut Rubber Insert Sleeve a a Stripping Length (mm [in]) b c Recommended Coupling Torque M M M8-06 LMR00/RG74/RG36 LMR95/RG58 3 [.8] 6 [.36] 6 [.36] M M M0-05 LMR400 5 [.97] [.433] [.433] 450N cm F M9-03 LMR600 6 [.36] 3 [.5] 3 [.5]. Slide the nut, the washer, the rubber and another washer onto the cable. Strip the cable as Striping Dimensions. 4. Slide the nut over the cable assembly.. Fold the braid back. Insert the insert sleeve into the cable (under the braid) until the back surface flush with the cable dielectric. 5. Screw sub-assembly into the body with wrench, recommended coupling torque see table. 3. Slide the center contact on until it bottom against the cable dielectric. Solder the center contact. Tel : Fax : sales@cmpter.com Website: #45 ZhongShan East Road, ZhenJiang 003, JiangSu, China
![ASSEMBLY INSTRUCTIONS A05 Back Nut O-Ring Stripping Length (mm [in]) Recommended Coupling Torque 50-03-4M5-040 7/8'' Cable See Figure 800N cm.](/docs-images/81/84571177/images/23-1.jpg "Stripping dimensions as shown, Several problems should be paid attention in stripping: (a) The end of the outer conductor s stripping should be on the wave peak.")
23 ASSEMBLY INSTRUCTIONS A05 Back Nut O-Ring Stripping Length (mm [in]) Recommended Coupling Torque M /8'' Cable See Figure 800N cm. Stripping dimensions as shown, Several problems should be paid attention in stripping: (a) The end of the outer conductor s stripping should be on the wave peak. (b) The end surface of the dielectric should be chamfered to mmx45 (c) Removing the burr at the inner conductor s inside lip (d) The end of the jacket surface should be chamfered to 0.5mmx45. (e) Removing impurities such as copper scale and burr at the end of the cable surface. 3. Screw off the back nut, assemble the back nut to the cable and make sure that the clamp is in the trough of the cable as shown by the following figure, flare the outer conductor of the cable so as to make sure that the outer conductor touch slanting surface of the inside hole at the clamp as shown. Expand Section Clamp 0.5mmx45 mm Outer Conductor Peak mmx45 4. Combine the main body and back nut by screwing as shown. Keep the back nut and the cable motionless, then tighten the main body and back nuts with a wrench.. Put the O-ring in the trough of the cable as shown. O-Ring Tel : Fax : sales@cmpter.com Website: #45 ZhongShan East Road, ZhenJiang 003, JiangSu, China
![ASSEMBLY INSTRUCTIONS A06 Back Nut Striping Dimensions (c) b a O-Ring a Stripping Length (mm [in]) b c Recommended Coupling Torque 50-0-4M6-07 50-03-4M6-039 /'' Cable 0 [.394] 8 [.709] 8 [.](/docs-images/81/84571177/images/24-0.jpg "0] 800N cm 50-3-4M6-04. Stripping dimensions as table, Several problems should be paid attention in stripping: (a) The end of the outer conductor s stripping should be on the wave peak.")
24 ASSEMBLY INSTRUCTIONS A06 Back Nut Striping Dimensions (c) b a O-Ring a Stripping Length (mm [in]) b c Recommended Coupling Torque M M6-039 /'' Cable 0 [.394] 8 [.709] 8 [.0] 800N cm M6-04. Stripping dimensions as table, Several problems should be paid attention in stripping: (a) The end of the outer conductor s stripping should be on the wave peak. (d) Inner conductor should be chamfered to mmx45. (e) Removing impurities such as copper scale and burr at the end of the cable surface. Peak 3. Screw off the back nut, assemble the back nut to the cable and make sure that the clamp is in the trough of the cable as shown by the following figure, flare the outer conductor of the cable so as to make sure that the outer conductor touch slanting surface of the inside hole at the clamp as shown. Expand Section Clamp mmx45 Outer Conductor 4. Combine the main body and back nut by screwing as shown. Keep the back nut and the cable motionless, then tighten the main body and back nuts with a wrench.. Put the O-ring in the trough of the cable as shown. O-Ring Tel : Fax : sales@cmpter.com Website: #45 ZhongShan East Road, ZhenJiang 003, JiangSu, China 3
25 ASSEMBLY INSTRUCTIONS A07 Back Nut Stripping Dimensions a Heatshrink sleeve (option) Stripping Length (mm [in]) 50-3-M06-06 RG40/Semi-rigid [.7]. Slide the heatshrink sleeve onto the cable (option). Strip the cable as Striping Dimensions. 3. Screw the back nut onto the body.. Slide the cable into the body until it stops. Solder the inner conductor. 4. Slide the sleeve over the body and heatshrink it in place (option). 4 Tel : Fax : sales@cmpter.com Website: #45 ZhongShan East Road, ZhenJiang 003, JiangSu, China
![630] 0 [.787] 50-3-M0-09 LMR400 0.9 [.49] 4 [.57] 5 [.97] 3 [.906]. Slide the heatshrink sleeve onto the cable (option).](/docs-images/81/84571177/images/26-1.jpg "Slide the ferrule onto the cable. Strip the cable as Striping Dimensions. 4. Crimp the ferrule with crimping tool (see table).")
26 ASSEMBLY INSTRUCTIONS A08 Ferrule Cap Stripping Dimensions c b a Heatshrink sleeve (option) HEX. Crimp Tool (mm [in]) a Stripping Length (mm [in]) b c 50-3-M M0-08 LMR00/RG74/RG36 LMR [.8] 6.8 [.68] 3 [.8] 5 [.97] 3 [.8] 6 [.630] 0 [.787] 50-3-M0-09 LMR [.49] 4 [.57] 5 [.97] 3 [.906]. Slide the heatshrink sleeve onto the cable (option). Slide the ferrule onto the cable. Strip the cable as Striping Dimensions. 4. Crimp the ferrule with crimping tool (see table). Solder the inner conductor. 3. Fan the braid. 5. Place the cap into the body. 3. Push the body under the braid. Slide the ferrule over the braid. 6. Press on the cap until stops. Slide the sleeve over the ferrule and heatshrink it in place (option). Tel : Fax : sales@cmpter.com Website: #45 ZhongShan East Road, ZhenJiang 003, JiangSu, China 5
![ASSEMBLY INSTRUCTIONS A09 Stripping Dimensions a Heatshrink sleeve (option) Stripping Length (mm [in]) 50-0-D06-030 RG40/Semi-rigid.4 4.](/docs-images/81/84571177/images/27-0.jpg "5 [.77]. Slide the heatshrink sleeve onto the cable (option). Strip the cable as Striping Dimensions. 4.")
27 ASSEMBLY INSTRUCTIONS A09 Stripping Dimensions a Heatshrink sleeve (option) Stripping Length (mm [in]) 50-0-D RG40/Semi-rigid [.77]. Slide the heatshrink sleeve onto the cable (option). Strip the cable as Striping Dimensions. 4. Slide the heatshrink sleeve over the body and heatshrink it in place (option).. Slide the cable into the body until it stops. 3. Solder the body onto the cable. 6 Tel : Fax : sales@cmpter.com Website: #45 ZhongShan East Road, ZhenJiang 003, JiangSu, China
28 MOUNTING HOLES 6.0 [.638 DIA.] 8.5 [.79] 3.50 [.38 DIA.].70 [0.500] [.30 DIA.] 6.0 [.634 DIA.] 8.5 [.79] 4.0 [.65 DIA.].70 [0.500] 3.90 [.547] M0 M0 M [.634 DIA.] 4.60 [.575] M04 Tel : Fax : sales@cmpter.com Website: #45 ZhongShan East Road, ZhenJiang 003, JiangSu, China 7
29 Cmpter Electronics, Ltd. Office Adress: #45 ZhongShan East Road, ZhenJiang, JiangSu China. Tel: Fax: sales@cmpter.com Website:
... A Vital Part of Connection World CMPTER. Cable Connectors Receptacles With Solder End PCB Connectors. Protective Caps BNC CONNECTORS
... A Vital Part of Connection World Cable Connectors Receptacles With Solder End PCB Connectors Protective Caps BNC CONNECTORS COPYRIGHT ELECTRONICS 04 BNC 50 Ohm Coaxial Connectors DESCRIPTION The Bayonet-Neil-Concelman,
... A Vital Part of Connection World CMPTER. Cable Connectors PCB Connectors Assembly Instructions Mounting Holes MMCX CONNECTORS
... A Vital Part of Connection World Cable Connectors PCB Connectors s Mounting Holes MMCX CONNECTORS COPYRIGHT ELECTRONICS 0 MMCX Series Coaxial Connectors DESCRIPTION MMCX Connectors are 45% smaller
Position switches FL series
Position switches FL series Selection diagram 01 08 11 19 0 04 05 Ø 8 mm Ø, mm external rubber stainless steel stainless steel glass fibre rod gasket sphere sphere 51 5 41 4 adjustable lever safety adjustable
PARTS CATALOG ESPRESSO EP SYSTEM
PARTS CATALOG ESPRESSO_EP_Parts_Catalog_USA_V1.0 - p1-4 1 Contents DIMENSIONS 3 SPECIFICATIONS 4 ESPRESSO TAP 5 ESPRESSO MODULE 9 ESPRESSO_EP_Parts_Catalog_USA_V1.0 - p1-4 2 137 mm 5.4 in. 414 mm 16.3
TEST SUMMARY HIGH SPEED DOCKING CONNECTOR. Table of Contents
Table of Contents 1.0 Scope 2.0 Product Description.0 pplicable Documents and Specifications 4.0 Qualification 5.0 Performance Results 5.1 Electrical Characteristics 5.2 Mechanical Characteristics 5. Environmental
Cable termination indoor and outdoor, premoulded SOT kv
Kabeldon cable accessories Kabeldon cable for XLPE accessories cables 12-36 kv Cable termination indoor and outdoor, premoulded SOT 12-36 kv Cold-applied No special tools Premoulded for easy and safe installation
COMMUNICATIONS Transmission Access Switching Optics Networking. DATA Servers Storage
BOARD TO BOARD CONNECTORS MEG-Array MEZZANINE Connector system HIGH DENSITY, BGA DESIGN EXCELS AT HIGH SPEED PERFORMANCE AND RELIABILITY DESCRIPTION The MEG-Array Mezzanine Connector system provides the
Receptacle MRE 14S-G Plug MRE 14P-G Hood MRE 14H
MRE 14S-G MRE 14P-G Hood MRE 14H plugs and receptacles are the accepted standard for rectangular-shaped, miniature, internal-type connectors. They embody all of the features expected of true miniaturization:
SELECTION GUIDE UNSEALED SNAP ACTION
UNSEALED SNAP ACTION 1 page 31 page 37 MODEL Description A General Purpose Snap Action Switch High capacity switch handles loads with large inrush currents. D2F Micro-voltage/current load Switches microvoltage
( ) Plastic Film Capacitors. Polyester Film Capacitor E C Q B E C Q B
Plastic ilm Capacitors Polyester ilm Capacitor Type: ECQB() Designed for high density insertion applications eatures Small in size Excellent electric characteristics in non-inductive construction RoHS
Edition Subject to change without notice
MHS 24-KD Welding-torch MIG-MAG gas-cooled 250A at 60% duty cycle (CO2) - 220A at 60% duty cycle (mixed gas) Art.-No. Spare parts as torch MHS 240-18-D water-cooled 24200311 Torch MHS 24-KD-SPEZIAL / 3m
Edition Subject to change without notice
36000311 Torch MHS 36-KD-SPEZIAL / 3m EURO central adapter 42mm² inner Torch body with cooling-duct section tube 36000411 Torch MHS 36-KD-SPEZIAL / 4m EURO central adapter 42mm² inner Torch body with cooling-duct
STANDARD STYLE BORE GAGE
DORSEY STANDARD BORE GAGE STANDARD STYLE BORE GAGE Revised: 9-18-03 PARTS LIST Proudly made in the USA Page 1 Dorsey Metrology International Revised: 2-6-04 Tel: (845) 454-3111 Fax: (845) 454-3888 ITEM
Edition Subject to change without notice
Spare parts as torch MHS 15-CLOU gas-cooled 31600311 Torch MHS Mini-316 / 3m EURO central adapter screwable M11 31600411 Torch MHS Mini-316 / 4m EURO central adapter screwable M11 31600511 Torch MHS Mini-316
Jura S Series Grinder Replacing
Lansdale, PA 19446 Phone: 215-361-7000 Fax: 215-361-7434 Jura S Series Grinder Replacing Please read before using this guide: This guide is for users who have know the use of fully automatic machines,
HCA & HCA-RA Series Hermetically Sealed LVDT
HCA & Series Hermetically Sealed LVDT Hermetically sealed, all welded Stainless steel housing MS type connector, glass sealed Axial or radial electrical connection IEC IP68 rating to 1,000 PSI [70 bars]
Lead spacing Diameter d 1 Type
Metallized Polyester Film Capacitors (MKT) Uncoated (Silver Caps) B 32 560 B 32 564 Extremely small dimensions Versions with special dimensions can be supplied at short notice Construction Dielectric:
Lead spacing Diameter d 1 Type
Metallized Polyester Film Capacitors (MKT) Uncoated (Silver Caps) B 32 560 B 32 564 Extremely small dimensions Versions with special dimensions can be supplied at short notice Construction Dielectric:
ENZX. EBARA Submersible Slurry Pump. Contents Project: Model: Chk d: Date:
Contents Section Page Model Designation 2 Features 3 Standard Specifications 4 Selection Chart 5 Performance Curves 6 Dimension Drawing 10 Sectional View 11 Motor Data 27 Standard Control Panels 28 www.pumpsebara.com
Introduction. No Hassle Guarantee
Pro Grill MANUAL Introduction Thank you for selecting West Marine s Pro Grill. Your unit has been carefully inspected and tested. The Pro Grill is one of the finest barbecues manufactured for marine use.
assembly guide ELECTRIC Model Numbers: Estimated time required for assembly: 1 Hour (English) /05/09
assembly guide Model Numbers: 08601559 10601578 10601585 10601514 Estimated time required for assembly: 1 Hour ELECTRIC (English) 42804372 11/05/09 2 ASSEMBLY GUIDE A, B, C, Assembly: CAUTION: For your
INSTALLATION MANUAL TG - ROTISSERIE OVEN MODELS
INSTALLATION MANUAL TG - ROTISSERIE OVEN MODELS MODELS Manual controls TG50 M TG110 M TG330 M TG550 M Model TG330 M - NOTICE - This manual is prepared for the use of trained Service Technicians and should
Metallized Polyester Film Capacitors (MKT-S) Axial Leads B High reliability capacitor Encapsulated in metal tube
Metallized Polyester Film Capacitors (MKT-S) Axial Leads B 32 537 High reliability capacitor Encapsulated in metal tube Construction Dielectric: polyethylene terephthalate Construction with structured
Surface-Mounted Thermostat ATH series
Page 1/11 urface-mounted Thermostat ATH series pecial features turdy case (protection type IP 54)) Microswitch elf-monitoring (TB/TW (TB)) in the event of a pressure drop afety cut-out (TB/TW (TB)) Tested
Parts Catalog Espresso System
Parts Catalog Espresso System 1 Contents SPECIFICATIONS... 4 ESPRESSO TAP SYSTEM... 6 ESPRESSO TAP SYSTEM... 8 ESPRESSO MODULE SYSTEM... 10 ESPRESSO MODULE SYSTEM... 12 ESPRESSO MODULE SYSTEM... 14 ESPRESSO
Metallized Polyester Film Capacitors (MKT) in Plastic Case B B Standard applications
Metallized Polyester Film Capacitors (MKT) in Plastic Case B 32 520 B 32 529 Standard applications Construction Dielectric: polyethylene terephthalate (polyester) Stacked-film technology for lead spacing
For Jura parts, repairs & tech support, contact: Services Unlimited, Inc./ Parts Guru
For Jura parts, repairs & tech support, contact: Services Unlimited, Inc./ Parts Guru 209 Walnut street, Lansdale, PA 19446 Phone: 215-362-7000 Fax: 215-361-7434 email: sales@partsguru.com Online store
Downflow Conversion Kit used to Modify Air Handler Units for Downflow Application
0672327-00 February 2015 Installation Instructions Downflow Conversion Kit used to Modify Air Handler Units for Downflow Application Scan to see the Downflow Installation Video Go to your app store and
INTRODUCTION. Your new smoker comes almost completely assembled. You will need to complete the assembly which includes:
INTRODUCTION Congratulations on your purchase of this Smith & Wesson SMOKER, Model SWS032. With proper set-up, operation and maintenance, this smoker will provide you with years of cooking enjoyment. Your
31Q-2 Multiplex Plunger Pumps Parts List
31Q-2 Multiplex Plunger Pumps Parts List Types: 31Q-2 Sales / Technical Information T USA Tollfree: 1 (800) 324-4706 Phone: 1 (918) 447-4600 Fax: 1 (918) 447-4677 Internet: http://www.nov.com P.O. Box
VCS325SSBI Series and VCS525SSBI Series Assembly Procedures
VCS325SSBI Series and VCS525SSBI Series Assembly Procedures Model VCS525SSBI Shown Tools Required: Knife or scissors, Phillips or Robertson (square head) screwdriver. WARNING: Some parts may have sharp
Accessories. Coupling for tube connection. Welding sleeve standard. Clamping nut with nipple to DIN Welding sleeve with flat
Accessories Coupling for tube connection Connection PN in bar Material Article no. G 1/4 x 6 mm 100 Steel ZA 106 G 1/2 x 6 mm 400 ZA 107 G 1/2 x 8 mm ZA 108 G 1/2 x 10 mm ZA 109 G 1/2 x 12 mm ZA 110 Clamping
Edition Subject to change without notice
62000311 Torch MHS 620 / 3m EURO central adapter 62000411 Torch MHS 620 / 4m EURO central adapter 62000511 Torch MHS 620 / 5m EURO central adapter 62050311 AUTomatic-torch MHS 620 / 3m EURO central adapter
Built in Electric Fan Oven
Built in Electric Fan Oven LAM3400 LAM3402 LAM3403 User & Installation Guide LAMONA The user manual will help you use your product quickly and safely. Index 01 - Before using the oven 05 07 - Cooking and
Installation & Parts Manual 2" & 3" High Capacity Strainers For Class 1, Petroleum Applications
Installation & Parts Manual 2" & 3" High Capacity Strainers For Class 1, Petroleum Applications Installation: M200-20 www.lcmeter.com Table of Contents Description Page Number Introduction... 2 What LC
RV DN PVC-U. Sediment strainer
RV 10 100 PVC-U Sediment strainer RV 10 100 The RV Sediment strainer limits the passage of any solid particles present in the fluid by means of a strainer. SEDIMENT STRAINER Connection system for solvent
Owner's Manual: Stainless Steel Rotisserie Kit for Kenmore Elite & Kenmore Premium Grills
Owner's Manual: Stainless Steel Rotisserie Kit for Kenmore Elite & Kenmore Premium Grills 141.158031 for 3/4 Burner Kenmore and Kenmore Elite Grills: 141.15804 for 5/6 Burner Kenmore and Kenmore Elite
PRO-SERIES PARTS CATALOG P
PRO-SERIES PARTS CATALOG P-1034-07 IMPORTANT INFORMATION The model number and serial number of your range is stamped on the number plate. This plate is located either on the front frame of the unit beneath
11D-2 Multiplex Plunger Pumps Parts List
11D-2 Multiplex Plunger Pumps Parts List Types: 11D-2 Sales / Technical Information T USA Tollfree: 1 (800) 324-4706 Phone: 1 (918) 447-4600 Fax: 1 (918) 447-4677 Internet: http://www.nov.com P.O. Box
Torch MHS D water-cooled
Torch MHS 240-18-D water-cooled The factory standard gear is marked in red. Holch Schweißbrenner GmbH Phone: +49(0)271 387860-11 Bühlstraße 14 Telefax: +49(0)271 387860-29 D-57080 Siegen E-Mail: info@holch-siegen.de
KREA - Espresso - 230V 50HZ
KREA - Espresso - 230V 50HZ 1 Door 2 Cabinet assy and cabinet 3 Electric system 4 Hydraulic system 5 Mixer and canister 6 Grinder doser unit 7 Coffee unit Z4000 D.38 8 Coffee unit Z4000 D.46 9 Pin and
Surface-Mounted Thermostat ATH series
Page 1/11 urface-mounted Thermostat ATH series pecial features turdy case (protection type IP 54)) Microswitch elf-monitoring (TB/TW) in the event of a pressure drop afety cut-out (TB/TW) Tested according
OMEGA PRODUCTS, INC LYSTER LANE HARRISBURG, PA U.S.A. PHONE: FAX:
OMEGA PRODUCTS, INC. 6291 LYSTER LANE HARRISBURG, PA 17111-4523 U.S.A. PHONE: 1.800.633.3401 FAX: 717.561.1298 May 28, 2013 INSTRUCTION MANUAL Eat well, drink well and live well with Omega www.omegajuicers.com
Product Description. Characteristic features. Further highlights. General Product Description Roller Rail Systems
5 Product Description Rexroth Roller Rail Systems were specially developed for use in machine tools, industrial robots and general machine construction applications calling for compact, rolling-element
Assembly Procedures VCS322SSBI Series / VCS522SSBI Series
Assembly Procedures VCS322SSBI Series / VCS522SSBI Series Tools Required: Knife or scissors, Phillips or Robertson (square head) screwdriver. Model VCS522SSBI Shown CAUTION: This grill is intended ONLY
Installation Instructions Built-In Coffee Maker
Installation Instructions Built-In Coffee Maker Single Double Espresso Espresso Single Latté Hot Double Decaf Large Cappuccino Latté Coffee Coffee Steamer Water E24CM75GSS e24cm76gss 102221 Rev. C-2 2
Please read all directions before using the product and retain this guide for reference. This product is intended for household use only.
Wine Gift Set User Guide IVAWINESET05 Thank you for purchasing the Ivation Wine Gift Set. This User Guide is intended to provide you with guidelines to ensure that operation of this product is safe and
EBI 10 High Precision Wireless Data Loggers
8 ELPRO Lepenik & Co. d.o.o., Ob gozdu 7c, Rogoza, 2204 Miklavž na Dravskem polju, Slovenija tel: +386 2 62 96 720 info@elpro.si www.elpro.si EBI 10 High Precision Wireless Data Loggers The Perfect Solution
For Jura parts, repairs and tech support, contact: Services Unlimited, Inc./ Parts Guru
For Jura parts, repairs and tech support, contact: Services Unlimited, Inc./ Parts Guru 209 Walnut street, Lansdale PA 19446 215-361-7000 email: sales@partsguru.com Online store: www. Instructions to replace
LUCKENBACH MODEL Assembly Instructions Rev
LUCKENBACH TM MODEL 03301800 Assembly Instructions Rev. 03-27-03 P/N: 42802113 WARNING! CAUTION! This unit is heavy. Tools needed: 2 adjustable wrenches, a flat screwdriver and hammer. DO NOT assemble
Manual Spark Ignition (MSI) Kit For Use only with Thermocouple Manual Safety (TMSI) UL Approved Fire Pit Pans with Burning Spur
AAA Battery MODEL: MSI-BSTMSI Manual Spark Ignition (MSI) Kit For Use only with Manual Safety (TMSI) UL Approved Fire Pit Pans with Burning Spur Installation and Operating Instructions IF YOU CANNOT READ
ALXE-56BFG Parts Manual
Parts Manual 8 5 DETAIL OF HOOD SWITCH MECHANISM FASTENERS & 5 ARE FOR ATTACHING THE SWITCH 0-0 SEE ELECTRICAL COMPONENTS 8 7 5 7 8 7 5 7 0 9 8 0 9 9 0 5 9 0 5 LAST SAVED BY:»» neil ««Wednesday, December
Measuring Fluoride in Water and Wastewater using the Thermo Scientific Orion Dual Star ph/ise Meter
Measuring Fluoride in Water and Wastewater using the Thermo Scientific Orion Dual Star ph/ise Meter Water and Lab Products, Thermo Fisher Scientific Technical Note 502 Key Words Thermo Scientific Orion
5KCG0702 W A_Final.indd 1 8/4/15 8:35 AM
5KCG0702 PARTS AND FEATURES PARTS AND ACCESSORIES Hopper lid Easy access stainless steel burrs 200 g glass hopper 15 grind settings Die cast metal body Grind control dial Power switch Faceplate assembly
DEPARTMENT OF THE ARMY TECHNICAL BULLETIN
DEPARTMENT OF THE ARMY TECHNICAL BULLETIN ASSEMBLY AND FABRICATION PROCEDURES FOR ACCESSORIES REQUIRED TO ADAPT A 55-GALLON DRUM TO A FUEL SUPPLY TANK USED WITH HEATER, SPACE, RADIANT TYPE, PORTABLE (LIQUID
TRIPLE INFUSION PUMP WITH AUTOMATIC CYCLING TIMER
instrumentation and software for research TRIPLE INFUSION PUMP WITH AUTOMATIC CYCLING TIMER PHM-102 / PHM-102A USER S MANUAL DOC-183 Rev. 2.1 Copyright 2016 All Rights Reserved P.O. Box 319 St. Albans,
SPC-60 Service / Training Manual
Somat Company Division of ITW Food Equipment Group LLC 165 Independence Court Lancaster, Pennsylvania 17601 Telephone 717-397-5100 Facsimile 717-291-0877 SPC-60 Service / Training Manual TABLE OF CONTENTS
Instructions for Use
POLYDOR Gyros - Grillgeräte GmbH Thyssenstraße DE - Lübbecke Telefon: +9 (0) - 0-0 Fax: +9 (0) - 0-99 info@gyronal.com www.polydor-gmbh.com Instructions for Use Electro Gyros-Grill-Equipments Series GLC,
Door. Cabinet assy Electric system Tank hydraulic system 500 cc. (water supply) Mixer and canister Grinder Oversize chambe coffee unit Cabinet
KORO PRIME ESPRESSO 1 2 3 7 8 9 12 13 Door Cabinet assy Electric system Tank hydraulic system 500 cc. (water supply) Mixer and canister Grinder Oversize chambe coffee unit Cabinet poslbl Item Description
PRO-SERIES Parts manual
PRO-SERIES Parts manual TABLE OF CONTENTS DESCRIPTION PAGE NO. 4 SEALED TOP BURNERS & OVEN BURNER 1-2 4 SEALED TOP BURNERS & OVEN BURNER SPARK/THERMOCOUPLE 3-4 36 RANGE 6 OPEN TOP BURNERS & OVEN BURNER
Universal Ignitor Upgrade Kit
Installation Instructions 120 volt Nitride Universal Ignitor Upgrade Kit for furnace, boiler or water heater a universal replacement nitride ignitor for silicone carbide ignitors We strongly recommend
Orion Plus metal IP65 enclosures
Orion Plus metal IP65 enclosures Enclosures with plain door steel colour RAL 7035 IP 65 / door closed insulation class : I according to IEC 6059,5mm thick sheet steel for body and door These enclosures
BUILT IN DELUXE SPIT BRAAI MODELS: 1200 & 1500
BUILT IN DELUXE SPIT BRAAI MODELS: 1200 & 1500 INSTALLATION INSTRUCTIONS Actual product may differ slightly from the picture above Features (this unit includes a light fitting, brass knob, stainless steel
CERTOMAT IS For controlled benchtop incubation
CERTOMAT IS For controlled benchtop incubation CERTOMAT IS For controlled bench top incubation The CERTOMAT IS from Sartorius has proven its value in many laboratories world-wide. In microbiology, this
Rotisserie Burner Replacement Parts Needed: Phillips head screwdriver #2 Standard Pliers or Adjustable Crescent Wrench
Rotisserie Burner Replacement Parts Needed: Phillips head screwdriver #2 Standard Pliers or Adjustable Crescent Wrench Nexgrill Industries Inc. 800-913-8999 customerservice@grillservices.com www.nexgrill.com
SERVICE MANUAL EM Artista Espresso Machine ISSUE: DATE: 11 February EM5900 Artista Espresso Machine Issue: A Page 1 of 23
SERVICE MANUAL EM59 5900 Artista Espresso Machine ISSUE: A DATE: 11 February 2008 EM5900 Artista Espresso Machine Issue: A Page 1 of 23 SPARE PARTS LIST Note: Not all parts are available as spare parts.
CAIMANO SPECIAL450 BARISTA
ANFIM ANFIM Srl Via B. Verro, 33/5-20141 - MILANO ITALY Tel. (+39) 02/8465054 - Fax.(+39) 02/8464401 e-mail: info@anfim.it web site: www.anfim.it COFFEE GRINDER INSTRUCTIONS MANUAL mod: CAIMANO SPECIAL450
TOP AND CABINET PARTS R e f Descripción TOP AND CABINET PARTS C a n t Numero de Parte 1 Literature Parts * *** 2 Top 1 8540716 3 Cabinet 1 W10201831 4 Panel, Front 1 W10297648 5 Toe Panel 1 8540813 6 Foot,
Grooving Tool: used to cut the soil in the liquid limit device cup and conforming to the critical dimensions shown in AASHTO T 89 Figure 1.
DETERMINING THE LIQUID LIMIT OF SOILS FOP FOR AASHTO T 89 Scope This procedure covers the determination of the liquid limit of a soil in accordance with AASHTO T 89-13. It is used in conjunction with the
GAS BARBECUE MODEL NO: BBQ4 USER GUIDE PART NO: /11
GAS BARBECUE MODEL NO: BBQ4 PART NO: 6925305 USER GUIDE 2/11 INTRODUCTION Thank you for purchasing this CLARKE product Before attempting to use this product, please read this manual thoroughly and follow
INFRARED BURNER KIT INSTRUCTIONS
3 INFRARED BURNER KIT INSTRUCTIONS (HOT SURFACE IGNITION) 5 1 4 NOTE: This unit has been retrofi tted with an infrared burner. Model # 3050 # 3060 Included parts 2 6* PARTS INCLUDED 1. Infrared burner
1.5 L Slow Cooker 7644 Instructions for Use
PARTS PLEASE SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. Lid Cooking pot Base Power indicator Control knob TECHNICAL DETAILS: POWER DETAILS: 230V A.C. POWER FREQUENCY: 50Hz WATTAGE: 120W SAFETY INSTRUCTIONS:
Package Vending. Specification. 426 Industrial Boulevard Kearneysville WV Phone: (304) Fax: (304)
120 PAGE: 1 of 7 R / COMPANY: Nestlé USA Inc. VOLUME: 14 oz. / 414 ml PACKAGE TYPE: Plastic HEIGHT: 7.67 in. / 194.8 mm DIAMETER: 2.64 in. / 67.0 mm WEIGHT: 1.06 lbs. / 0.48 kg COUNTRY OF ORIGIN: USA PVS
ALXE-36 & 36SZ Parts Manual
ALXE-6 & 6SZ Parts Manual Serial Numbers up to 7-99999 0 9 5 8 6 DETAIL OF HOOD SWITCH MECHANISM FASTENERS 5 & 6 ARE FOR ATTACHING THE SWITCH 0-066 SEE ELECTRICAL COMPONENTS 5 9 7 5 5 0 5 9 8 7 7 9 6 7
PLIO-V-MARKERS oval markers in semi-cut pull-off form
PLIO-V-MARKERS oval markers in semi-cut pull-off form PLIO-V-MARKERS PLIO-V-MARKERS Material: flexible PVC Temperature range: - to +9 C Hardness Shore A: ± Tensile stregth at break: MPa Ultimate elongation:
Strainers In-Line and Angle
Design Specifications DSSTRAINERS Revision 02 Strainers In-Line and Angle Description Strainers are installed in pipe lines ahead of meters, pumps, valves, etc., to protect such equipment against intrusion
A N F I M Srl. Caimano: Timer / Automatico / Manuale Super Caimano: Timer / Automatico Caimano SPecial 450: Timer / Automatico
ANFIM A N F I M Srl Via B. Verro, 33/5-204 - Tel. (+39) 02/8465054 e-mail: info@anfim.it MILANO ITALY - Fax.(+39) 02/846440 web site: www.anfim.it GB INSTRUCTIONS MANUAL mod: Caimano: Timer / Automatico
the Interactive Catalog
Interactive Catalog Supplements Catalog PDFs If you need detailed product information, or help choosing the right product for your application, see our Interactive Catalog Use the Interactive Catalog to
Rated voltage Capacitance Cap. Tol. Suffix Suffix. 40 to +85 C 50VDC, 63VDC,100VDC,200VDC to 0.47µF
lastic ilm Capacitors olyester ilm Capacitor Type: ECQB Designed for application where high density insertion of components is required. eatures High volumetric efficiency Non-inductive construction Recommended
REMAPRESS IVE. Pioneering, innovative, certified by German TÜV. HIGH PERFORMANCE vulcanizing technology
REMAPRESS IVE Pioneering, innovative, certified by German TÜV HIGH PERFORMANCE vulcanizing technology REMAPRESS IVE Product innovation 2015 - New vulcanizing presses REMAPRESS IVE with pressure bags, heating
Deluxe Hand Pump Pressurized Beer Line Cleaning Kit Instruction Manual
Deluxe Hand Pump Pressurized Beer Line Cleaning Kit Instruction Manual 1. Cleaning Bottle 6. Siphon Tube 2. Pump 7. Screw Cap 3. Duplex Coupler 8. Faucet Brush 4. Plastic Hose Barb 9. 3/16" I.D. Plastic
Honey Stick Machine Complete Kit HH-100
Honey Stick Machine Complete Kit HH-100 501 1st St S, Hackensack, MN 56452 500 Santa Anita Dr., Woodland, CA 95776 485 Stewart Rd, Wilkes-Barre, PA 18706 1600 Commerce Street, Marshall, TX 75672 Telephone:
TOASTER OVEN USER MANUAL MODEL: PKMFT039
TOASTER OVEN USER MANUAL MODEL: PKMFT039 IMPORTANT SAFETY INSTRUCTION When using electrical appliances, basic safety precautions should always be followed, including the followings: 1 Don t touch hot surfaces
PRODUCT CATALOGUE.
PRODUCT CATALOGUE www.greenmountaingrills.com.au PELLET GRILLS TECHNICAL DETAILS Model: GMG-JB Temperature Range: 65 C-260 C Dimensions: 178 x 130 x 61cm Total Weight: 84 kgs Voltage: 240V Stainless Steel
INSTRUCTION MANUAL MODELS: RT-30, RT-36, RT-48, RT-60 & RT-72 REVISED APRIL, 2003 *PLEASE RETAIN FOR FUTURE REFERENCE
INSTRUCTION MANUAL MODELS: RT-30, RT-36, RT-48, RT-60 & RT-72 REVISED APRIL, 2003 *PLEASE RETAIN FOR FUTURE REFERENCE THANK YOU for purchasing this quality product. Your Crown Verity Inc. rotisserie will
5KEK1322 W A_v08.indd 1 5/13/16 2:25 PM
5KEK1322 W10878653A_v08.indd 1 PARTS AND FEATURES PARTS AND ACCESSORIES Tea steeper lid (center section of lid with handle) Kettle lid (outer section) Stainless steel lime scale filter Removable stainless
PAPER DRINK CUPS QUALITY DISPOSABLE PAPER & PLASTIC PACKAGING FOR EVERY OCCASION
PAPER DRINK CUPS QUALITY DISPOSABLE PAPER & PLASTIC PACKAGING FOR EVERY OCCASION PAPER S Perfect for soda, juices, mixed drinks or iced tea 2 QUALITY AT YOUR FINGERTIPS PAPER S Whatever your beverage of
22 Kettle Charcoal Grill SAFE USE, CARE AND ASSEMBLY MANUAL
22 Kettle Charcoal Grill SAFE USE, CARE AND ASSEMBLY MANUAL 85-1448-8 ST22022D Read and save this manual for future reference. If pre-assembled, leave this manual with unit for consumer s future reference.
ALXE-56 & 56SZ Parts Manual. Serial Numbers forward
ALXE-56 & 56SZ Parts Manual Serial Numbers 18-00000 forward 2 5 1 6 26 9 1 DETAIL OF HOOD SWITCH MECHANISM FASTENERS 1 & 1 ARE FOR ATTACHING THE SWITCH 210-0626 SEE ELECTRICAL COMPONENTS 6 27 26 11 2 2
IMPORTANT INFORMATION
Quality & Value Since 1912 Manufacturers of Superior Quality Gas, Electric And Commercial Style Ranges IMPORTANT INFORMATION The model and serial number of your range is stamped on the number plate. This
UH8 Installation Manual. Installation. Insert clip here. Then Slide down to lock in place. Description. 2 Wiring Centre.
Description UH8 Installation Manual The UH8 is an 8 Zone wiring centre for use with Heatmiser 230v thermostats. The UH8 can be used to control any actuator or valve which requires a 230v AC signal. At
VGBQ5323RE : CONTROL AREA [1/12]
![VGBQ5323RE : CONTROL AREA [1/12]](/thumbs/90/102655823.jpg "VGBQ5323RE : CONTROL AREA [1/12]")
VGBQ5323RE : 001 - CONTROL AREA [1/12] Page 1 of 24 VGBQ5323RE : 001 - CONTROL AREA [1/12] Ref # Part Number Qty. Description 1 PD020067 NO.6 X 3/8 PAN PHIL. TEK SS 2 PD010012 VALVE BOLT 1/4-20 UNC-2B
ROCPAC International UFB PRODUCT LIST
Edition #8 4th May Pull Tapes for FAT to Pedestal 33522 Pull Tape Dispenser Upright PB2 each 33522 It is recommended practice that a pull tape dispenser 33437 Red - ONE - Pull Tape Box of 1000m 33437 is
SANDVIK GRINDING EQUIPMENT INCREASES YOUR PRODUCTIVITY
SANDVIK GRINDING EQUIPMENT INCREASES YOUR PRODUCTIVITY CONTENT CONTENTS INTEGRAL STEEL GRINDER RG100E...4 INTEGRAL STEEL GRINDER RG100H...5 INTEGRAL STEEL GRINDER RG100P...6 INTEGRAL STEEL AND CROSS GRINDER
SOLISTA ESPRESSO - 220V 50HZ
SPARE PARTS CATALOGUE www.automatedecafea.net Tel. 072 152 1763 SOLISTA ESPRESSO - 220V 50HZ DOC. N. : C3615X01 1 - Door Page: 2 1 - Door 1 255291 DOOR 2 255433 PUSH-BUTTON REFERENCE 3 255432 SELECTION
CRUCIBLE ASSEMBLY CRUCIBLE ASSEMBLY LID ASSEMBLY SLIDER ASSEMBLY TOP FLANGE TOP GLASS MOUNTING RODS CENTRAL FLANGE BOTTOM GLASS BOTTOM FLANGE
CRUCIBLE CRUCIBLE SECTION PG. LID SLIDER TOP FLANGE LID Lid and Handle/Slider assembly 3-4 SLIDER TOP FLANGE TOP GLASS MOUNTING RODS Lid and Handle/Slider assembly Top Glass and Top Flange Top Glass and
MBAA DISTRICT ST. LOUIS. Home Brewing System. Rev 1.5 3/6/2010
MBAA DISTRICT ST. LOUIS Home Brewing System Rev 1.5 3/6/2010 This document is a guide to use and cleaning of the brewing system. Comments on safe use of this system are included to make you aware of many,
Hotpoint H/A - Ariston automatic, built-in coffee machine MCX 103 X - MCK 103 X/HA
Hotpoint H/A - Ariston automatic, built-in coffee machine MCX 103 X - MCK 103 X/HA Automatic, built-in coffee machine Contents 1) Technical Specifications 2) Accessibility 3) Wiring diagram 4) Water circuit
TECHNOLOGIES DEMONSTRATED AT ECHO: BRIQUETTE PRESSES FOR ALTERNATE FUEL USE
Copyright 2001 TECHNOLOGIES DEMONSTRATED AT ECHO: BRIQUETTE PRESSES FOR ALTERNATE FUEL USE BY JASON DAHLMAN WITH CHARLIE FORST Published 2001 AN ECHO TECHNICAL NOTE INTRODUCTION Briquettes made from materials
SOLISTA ESPRESSO - 23
SOLISTA ESPRESSO - 23 1 2 3 5 6 7 8 9 10 11 Door Cabinet assy and cabinet Electric system Tank hydraulic system 600 cc. Cup dispenser Sugar and spoons dispenser Mixer and canister Grinder doser unit Variable