IMPRESSA F7 Instructions for Use

Size: px
Start display at page:

Download "IMPRESSA F7 Instructions for Use"

Transcription

1 IMPRSSA F7 Instructions for Use The Instructions for use has been awarded the seal of approval by the independent German Technical Inspection Agency, TÜV SÜD, due to its easy-to-understand style, its thoroughness and coverage of safety aspects.

2 Table of contents Your IMPRSSA F7 Control elements 4 Important information 6 Proper use...6 For your safety Preparing and using for the first time 9 JURA on the Internet...9 Setting up the machine...9 Filling the bean container...9 First-time use...9 Determining the water hardness...12 Adjusting the grinder...13 Filling the water tank Preparation 14 Ristretto, espresso and coffee...14 Two speciality coffees at the touch of a button...15 Cappuccino...15 Milk foam...16 Ground coffee...17 Permanently setting the amount of water for the cup size...18 Hot water Daily operation 20 Switching on...20 Daily maintenance...20 Switching off Permanent settings in programming mode 22 Product settings Setting the water hardness...24 nergy-saving mode...25 Automatic switch-off...26 Rinses...26 Restore factory settings...27 Querying information...28 Unit for amount of water...29 Language Maintenance 31 Rinsing the machine...31 Rinsing the fine foam frother Cleaning the fine foam frother Dismantling and rinsing the fine foam frother

3 Table of contents Dismantling and rinsing the professional fine foam frother...34 Inserting and activating the filter...35 Changing the filter...36 Cleaning the machine Descaling the machine...38 Cleaning the bean container...41 Descaling the water tank Display messages 42 7 Troubleshooting 43 8 Transport and environmentally friendly disposal 45 Transport / mptying the system...45 Disposal Technical data Index JURA contact details / Legal information 52 Symbol description Warnings J WARNING J CAUTION CAUTION Always take note of any information marked with the words CAUTION or WARNING and a warning sign. The signal word WARNING draws your attention to potential serious injury, and the signal word CAUTION to potential minor injury. CAUTION draws your attention to potential damage to the machine. Symbols used T Prompt to take action. This symbol means that you are being prompted to perform some action. Information and tips to make it even easier to use your IMPRSSA. 1 SPRSSO Display 3

4 Control elements Control elements Bean container with aroma preservation cover 2 Water tank cover 3 Water tank 4 Power switch and mains cable (back of the machine) 5 Coffee grounds container 6 Drip tray 7 Cup grille 8 Filler funnel cover 9 Filler funnel for ground coffee 10 Storage compartment cover 11 Grinder adjustment switch 12 Measuring spoon for ground coffee 13 Height-adjustable hot-water nozzle 14 Switch for hot water and steam preparation 15 Connector System for removable frothers 16 Fine foam frother 17 Height-adjustable coffee spout 4

5 Control elements Top of the machine 1 Q On/Off button 2 g Rotary Switch 3 c Maintenance button Front 4 Display 5 Preparation buttons Y Ristretto button < spresso button > Coffee button Hot Water button n Steam button * Cappuccino button The Connector System permits the use of different cappuccino frothers. These are available from stockists. Professional fine foam frother Fine foam frother Milk foam Milk foam Hot milk 5

6 Important information Important information Proper use The machine is designed and intended for private domestic use. It should only be used for coffee preparation and to heat milk and water. Use for any other purpose will be deemed improper. JURA lektroapparate AG cannot accept any responsibility for the consequences of improper use. Before using the machine read these instructions for use thoroughly and completely and comply with the instructions they contain. A warranty service is not applicable for damage or defects caused by non-compliance with the instructions for use. Keep these instructions for use close to the machine and pass them on to the next user. For your safety J Please carefully read and observe the important safety information set out below. To avoid danger of potentially fatal electric shock: U Never use a machine which is damaged or has a defective mains cable. U In the event of signs of damage, for example if there is a smell of burning, unplug the machine immediately from the mains supply and contact JURA service. U If the mains cable of this machine is damaged, it must be repaired either directly by JURA or by an authorised JURA service centre. U Make sure that the IMPRSSA and the mains cable are not located close to hot surfaces. U Be careful to ensure that the mains cable is not trapped and does not rub against sharp edges. U Never open and repair the machine yourself. Do not modify the machine in any way that is not described in these instructions for use. The machine contains live parts. If opened, there is a danger of potentially fatal injury. Repairs may only be carried out by authorised JURA service centres, using original spare parts and accessories. U To completely and safely disconnect the machine from the power supply, first switch off the IMPRSSA using the On/Off 6

7 Important information button and then at the power switch. Only then should you remove the mains plug from the power socket. There is a risk of scalds or burns on the spouts and fine foam frother: U Place the machine out of the reach of children. U Do not touch any hot parts. Use the handles provided. U Be careful to ensure that the fine foam frother is correctly installed and clean. If incorrectly fitted or if it becomes blocked, the fine foam frother or its parts might come off. A defective machine is not safe and could cause injury or fire. To avoid damage and any associated risk of injury or fire: U Never allow the mains cable to loosely hang down. The mains cable could pose a tripping hazard or become damaged. U Protect the IMPRSSA from environmental influences such as rain, frost and direct sunlight. U Do not immerse the IMPRSSA, mains cable or connections in water. U Do not put the IMPRSSA or any individual parts in the dishwasher. U Switch your IMPRSSA off at the power switch before any cleaning operation. Always wipe the IMPRSSA with a damp cloth rather than a wet one, and protect it from prolonged exposure to water splash. U Only connect the machine to the mains voltage in accordance with the information on the rating plate. The rating plate is located on the underside of your IMPRSSA. Further technical data is provided in these instructions for use (see Chapter 9 Technical data ). U Please only use original JURA maintenance products. Use of products that are not explicitly recommended by JURA could damage the IMPRSSA. U Do not use any coffee beans treated with additives or caramelised coffee beans. U Only fill the water tank with fresh, cold water. U Switch the machine off at the power switch if you are going to be absent for a longer period of time. 7

8 Important information People, including children, who U do not have the physical, sensory or mental capabilities to use the machine safely or U are inexperienced or lack knowledge in how to use the machine safely must be supervised by a responsible person when using it, or must be instructed in how to use it correctly. Safety when handling the CLARIS Blue filter cartridge: U Filter cartridges should be kept out of the reach of children. U Store filter cartridges in a dry place in the sealed packaging. U Protect cartridges from heat and direct sunlight. U Do not use damaged filter cartridges. Do not open filter cartridges. U 8

9 1 Preparing and using for the first time 1 Preparing and using for the first time JURA on the Internet Visit us on the Internet. You can download short operating instructions for your machine from the JURA website ( You will also find interesting and up-to-date information on your IMPRSSA and on every aspect of coffee. Setting up the machine When setting up your IMPRSSA, please note the following: U Place the IMPRSSA on a horizontal surface that is not sensitive to water. U Choose a spot for your IMPRSSA which protects the machine against overheating. nsure that the ventilation slots are not covered. Filling the bean container CAUTION Coffee beans which have been treated with additives (e.g. sugar), ground coffee or freeze-dried coffee will damage the grinder. T Only use untreated coffee beans to fill the bean container. T Remove the aroma preservation cover. T Remove any dirt or foreign objects from inside the bean container. T Fill the bean container with coffee beans and close the aroma preservation cover. First-time use J WARNING When using the machine for the first time, you can choose whether you want to operate IMPRSSA with or without the CLARIS Blue filter cartridge. If the water hardness is 10 dh or more, we recommend using the filter cartridge. If you do not know the hardness of your water, you can find this out first (see Chapter 1 Preparing and using for the first time Determining the water hardness ). If the machine is operated with a defective mains cable, there is a danger of potentially fatal electric shock. T Never use a machine which is damaged or has a defective mains cable. 9

10 1 Preparing and using for the first time Precondition: The bean container has been filled. T Insert the mains plug into a power socket. 3 T Switch on the IMPRSSA using the power switch on the back of the machine. Q T Press the On/Off button to switch the IMPRSSA on. SPRACH DUTSCH appears on the display. g T Turn the Rotary Switch until the required language is displayed, e.g. LANGUAG NGLISH. k T Press the Rotary Switch to confirm the language. OK appears briefly on the display to confirm the setting. FILTR w YS Now decide whether you want to operate your IMPRSSA with or without a CLARIS Blue filter cartridge. First-time use with filter cartridge activation k k T Press the Rotary Switch. OK appears briefly on the display. FILTR INSRT T Press the Rotary Switch. FILL WATR TANK T Open the water tank cover. T Remove the water tank and rinse it with cold water. T Open the filter holder. T Remove the CLARIS Blue filter cartridge from the Welcome Pack. T Insert the CLARIS Blue filter cartridge into the water tank, exerting slight pressure. T Close the filter holder. It will click into place audibly. After two months, the filter will cease to work. Set the date on the date plate on the filter holder in the water tank. T Fill the water tank with fresh, cold water and reinsert the tank. SWITCH OPN The arrow on the switch lights up. 10

11 1 Preparing and using for the first time T Place a receptacle (at least 300 ml) under the fine foam frother and the coffee spout. j T Turn the switch to the m position. FILTR RINSING, water flows out of the fine foam frother. You can interrupt rinsing of the filter at any time. To do this, turn the switch clockwise. Turn the switch anticlockwise to continue rinsing the filter. The water may be slightly discoloured. This is not harmful to health and does not affect the taste. Rinsing of the filter stops automatically after approximately 300 ml. SWITCH CLOS appears on the display. h T Turn the switch to the position. The illuminated arrow on the switch goes out. SYSTM FILLING, the system fills up with water. HATING, the machine heats up. RINSING, the system is rinsed. The rinse stops automatically. RADY appears on the display. Your IMPRSSA is ready for use. First-time use without filter cartridge activation g T Turn the Rotary Switch until FILTR - NO is displayed. k T Press the Rotary Switch. OK appears briefly on the display. 16 dh If you do not know the hardness of your water, you must find this out first (see Chapter 1 Preparing and using for the first time Determining the water hardness ). g T Turn the Rotary Switch to change the water hardness setting, e.g. to 25 dh. k T Press the Rotary Switch. OK appears briefly on the display. FILL WATR TANK T Open the water tank cover. T Remove the water tank and rinse it with cold water. 11

12 1 Preparing and using for the first time T Fill the water tank with fresh, cold water and reinsert the tank. SWITCH OPN The arrow on the switch lights up. T Place a receptacle under the fine foam frother and under the coffee spout. j T Turn the switch to the m position. SYSTM FILLING, the system fills up with water. SWITCH CLOS h T Turn the switch to the position. The illuminated arrow on the switch goes out. SYSTM FILLING, the system fills up with water. HATING, the machine heats up. RINSING, the system is rinsed. The rinse stops automatically. RADY appears on the display. Your IMPRSSA is ready for use. Determining the water hardness You can find out what the water hardness is by using the Aquadur test strip supplied as standard. T Hold the test strip briefly (for 1 second) under flowing water. Shake off the water. T Wait for about 1 minute. T You will then be able to read the degree of water hardness from the discolouration of the Aquadur test strip and the description on the packaging. 12

13 1 Preparing and using for the first time Adjusting the grinder CAUTION You can adjust the grinder on a continuous scale to suit the degree of roast of your coffee. If you adjust the consistency of grind when the grinder is not operating, the grinder adjustment switch could be damaged. T Only adjust the consistency of grind when the grinder is running. The consistency of grind is correct if the coffee flows regularly from the coffee spout. In addition a fine, thick crema forms. xample: Proceed as follows to change the consistency of grind during the preparation of an espresso. T Place a cup under the coffee spout. T Open the storage compartment cover. < T Press the spresso button to start preparation. T Turn the grinder adjustment switch to the desired position while the grinder is running. The preset amount of water flows into the cup. Preparation stops automatically. T Close the storage compartment cover. Filling the water tank CAUTION Daily maintenance of the machine and hygiene when handling milk, coffee and water are key to a perfect coffee result in the cup every time. You should therefore change the water daily. Milk, sparkling mineral water or other liquids can damage the water tank or the machine. T Only fill the water tank with fresh, cold water. T Open the water tank cover. T Remove the water tank and rinse it with cold water. T Fill the water tank with fresh, cold water and reinsert the tank. T Close the water tank cover. 13

14 2 Preparation 2 Preparation You can stop the machine at any time while a speciality coffee, steam or hot water is being prepared. Just press any button (for a speciality coffee) or return the switch to its original position (for steam and hot water). Before the grinding operation you can select the coffee strength by turning the Rotary Switch g: MILD, NORMAL, STRONG or XTRA. During the grinding operation you can select the coffee strength of single products by turning the Rotary Switch g. During preparation, you can change the preset amount of water or steam by turning the Rotary Switch g. You can follow the current status of preparation on the progress bar. Coffee tastes best served hot. A cold porcelain cup cools the beverage and impairs the taste. We therefore recommend prewarming the cups. The full coffee aroma can develop only in prewarmed cups. You can purchase a JURA cup warmer from your specialised dealer. You can make permanent settings for all products in programming mode (see Chapter 4 Permanent settings in programming mode Product settings ). Ristretto, espresso and coffee Ristretto Y, espresso < and coffee > are all prepared following this model. xample: Proceed as follows to prepare one coffee. Precondition: RADY is displayed. T Place a cup under the coffee spout. > T Press the Coffee button. Preparation starts. 1 COFF and the coffee strength are displayed. The preset amount of water for coffee flows into the cup. Preparation stops automatically. RADY appears on the display. 14

15 2 Preparation Two speciality coffees at the touch of a button Two ristretti, two espressi or two coffees can always be prepared following the same model: Press the preparation button you want twice within two seconds. Cappuccino Your IMPRSSA can prepare a cappuccino without the cup having to be moved. This chapter applies to the professional fine foam frother and the fine foam frother. xample: Proceed as follows to prepare one cappuccino. Precondition: RADY is displayed. T Remove the protective cover from the fine foam frother. T Connect the milk pipe to the fine foam frother. Use the short pipe for a milk container and the long pipe for a milk carton. T Connect the other end of the milk pipe to a milk container or immerse it in a milk carton. T Place a cup under the coffee spout and the fine foam frother. (Figure: Optional JURA Cool Control Basic 0.6 l) nsure that the filling height of the milk is no higher than the milk pipe connection on the fine foam frother. If you are using the professional fine foam frother, turn the selector switch to the Milk Foam position é. * T Press the Cappuccino button. NORMAL HATING / STAM As soon as the machine has heated up, SWITCH OPN appears. The arrow on the switch lights up. j T Turn the switch to the m position. CAPPUCCINO, the milk foam is prepared. Preparation stops automatically when the preset amount of steam is reached. SWITCH CLOS 15

16 2 Preparation h T Turn the switch to the position. The illuminated arrow on the switch goes out. CAPPUCCINO appears on the display. Coffee preparation starts. The preset amount of water for espresso flows into the cup. Preparation stops automatically. RADY appears on the display. To ensure that the fine foam frother always works properly, you must clean it daily when you have been preparing milk (see Chapter 5 Maintenance Cleaning the fine foam frother ). Your IMPRSSA will not prompt you to clean the fine foam frother. Milk foam This chapter applies to the professional fine foam frother and the fine foam frother. With the professional fine foam frother, available as an optional accessory, you can also prepare hot milk. xample: Proceed as follows to prepare milk foam. Precondition: RADY is displayed. T Remove the protective cover from the fine foam frother. T Connect the milk pipe to the fine foam frother. Use the short pipe for a milk container and the long pipe for a milk carton. T Connect the other end of the milk pipe to a milk container or immerse it in a milk carton. T Place a cup under the fine foam frother. (Figure: Optional JURA Cool Control Basic 0.6 l) n nsure that the filling height of the milk is no higher than the milk pipe connection on the fine foam frother. If you are using the professional fine foam frother, turn the selector switch to the Milk Foam position é. T Press the Steam button. HATING / STAM As soon as the machine has heated up, RADY / STAM appears. The arrow on the switch lights up. 16

17 2 Preparation j T Turn the switch to the m position. STAM, the milk foam is prepared. Preparation stops automatically when the preset amount of steam is reached. SWITCH CLOS h T Turn the switch to the position. The illuminated arrow on the switch goes out. RADY / STAM appears on the display. You can continue to prepare steam for the next 40 seconds or so without the machine having to heat up again. To ensure that the fine foam frother always works properly, you must clean it daily when you have been preparing milk (see Chapter 5 Maintenance Cleaning the fine foam frother ). Your IMPRSSA will not prompt you to clean the fine foam frother. Ground coffee You can choose to use a second coffee variety, for example decaffeinated coffee, with the filter funnel for ground coffee. Never add more than two level measuring spoons of ground coffee. Use ground coffee which is not ground too finely. Very fine coffee can block up the system so that the coffee only comes out in drips. If you did not fill the machine with a sufficient amount of ground coffee, NOT NOUGH PR-GROUND is displayed and the IMPRSSA stops the operation. The desired speciality coffee must be prepared within approximately one minute after filling with the ground coffee. Otherwise the IMPRSSA stops the operation and is once more ready for use. All speciality coffees with ground coffee are prepared following this model. xample: Proceed as follows to prepare one espresso using ground coffee. Precondition: RADY is displayed. T Place an espresso cup under the coffee spout. 17

18 2 Preparation T Open the cover of the filler funnel for ground coffee. FILL PR-GROUND T Place one level measuring spoon of ground coffee into the filler funnel. T Close the cover of the filler funnel. SLCT BUTTON < T Press the spresso button. Preparation starts. 1 SPRSSO, the preset amount of water for espresso flows into the cup. Preparation stops automatically. RADY appears on the display. Permanently setting the amount of water for the cup size It is easy to make permanent settings for the amount of water for all speciality coffees and hot water according to the cup size. Adjust the amount once as shown in the following example. very time you prepare a drink in the future, this amount of water will be dispensed. The permanent settings for adapting the amount of water to the cup size for all speciality coffees and hot water follow this model. xample: Proceed as follows to permanently set the amount of water for one coffee. Precondition: RADY is displayed. T Place a cup under the coffee spout. > T Press and hold the Coffee button. 1 COFF > T Hold the Coffee button down until NOUGH COFF? appears. > T Release the Coffee button. Preparation starts and the coffee flows into the cup. T Press any button as soon as there is sufficient coffee in the cup. Preparation stops. OK appears briefly on the display. The set amount of water for one coffee is permanently stored. RADY appears on the display. You can alter this setting at any time by repeating the above procedure. 18

19 2 Preparation You can also permanently set the amount of water for all speciality coffees and hot water in programming mode (see Chapter 4 Permanent settings in programming mode Product settings ). Hot water To obtain a perfect water flow, use the hot-water nozzle. You can find the hot-water nozzle under the cover of the storage compartment. J CAUTION There is a danger of scalding from hot water splashes. T Avoid direct contact with the skin. xample: Proceed as follows to prepare hot water. Precondition: RADY is displayed. T Carefully remove the fine foam frother from the Connector System by twisting slightly. T Open the storage compartment cover, take out the hotwater nozzle and close the cover again. T Attach the hot-water nozzle to the connector. T Place a cup under the hot-water nozzle. T Press the Hot Water button. SWITCH OPN The arrow on the switch lights up. j T Turn the switch to the m position. WATR PORTION, the preset amount of water flows into the cup. Preparation stops automatically. SWITCH CLOS h T Turn the switch to the position. The illuminated arrow on the switch goes out. RADY appears on the display. You can also prepare any amount of hot water you require: To do this, turn the switch to the m position. When there is enough water in the cup, turn the switch back to the position. 19

20 3 Daily operation 3 Daily operation Switching on Daily maintenance of the machine and hygiene when handling milk, coffee and water are key to a perfect coffee result in the cup every time. You should therefore change the water daily. Precondition: Your IMPRSSA is switched on at the power switch. T Place a receptacle under the coffee spout. Q T Press the On/Off button to switch the IMPRSSA on. HATING RINSING, the system is rinsed. The rinse stops automatically. RADY appears on the display. Your IMPRSSA is ready for use. Daily maintenance To ensure that you get many years of reliable service out of your IMPRSSA and to guarantee the optimum coffee quality, the machine requires daily maintenance. T Pull out the drip tray. T mpty the coffee grounds container and the drip tray. Rinse them both with warm water. T Refit the coffee grounds container and the drip tray. T Rinse the water tank with clean water. T Clean the fine foam frother (see Chapter 5 Maintenance Cleaning the fine foam frother ). T Dismantle and rinse the fine foam frother (see Chapter 5 Maintenance Dismantling and rinsing the fine foam frother ). T Wipe the surface of the machine with a clean, soft, damp cloth (e.g. microfibre cloth). In the interests of hygiene, we recommend changing the milk pipe on a regular basis (approx. every 6 months). Replacement pipes are available from specialised dealers. 20

21 3 Daily operation Switching off When the IMPRSSA is switched off, the system is automatically rinsed if a speciality coffee has been prepared. If cappuccino or milk foam has been prepared, the machine will also prompt you to rinse the cappuccino frother. Precondition: RADY is displayed. T Place a receptacle under the fine foam frother and under the coffee spout. Q T Press the On/Off button. SWITCH OPN (if you have prepared cappuccino or milk foam) The arrow on the switch lights up. j T Turn the switch to the m position. CAPPUCCINO RINSING, the fine foam frother is rinsed. SWITCH CLOS h T Turn the switch to the position. The illuminated arrow on the switch goes out. RINSING, the system is rinsed. The operation stops automatically. Your IMPRSSA is switched off. When the IMPRSSA is switched off with the On/Off button, the machine consumes less than 0.1 W of standby energy. The machine can be completely disconnected from the power supply using the power switch. 21

22 4 Permanent settings in programming mode 4 Permanent settings in programming mode You can make permanent settings in programming mode. You can navigate through the programme items and permanently save the required settings simply by turning and pressing the Rotary Switch. You can make the following settings with the Rotary Switch: Programme item Sub-item xplanation RINS C CLANING, RINS, C RINS, CLAN, FILTR (only if filter T Start the required maintenance programme here. If no action is taken in this programme item, programming mode is exited automatically after approximately 5 seconds. is activated), DSCAL (only if filter is not activated) BUTTONS SLCT BUTTON T Select your settings for speciality coffees and hot water. FILTR w / FILTR - HARDNSS (only if filter is not activated) NRGY w / NRGY - OFF AFTR RINSS RST ALL YS, NO T Indicate whether you are operating your IMPRSSA with or without a CLARIS Blue filter cartridge. 1 dh 30 dh T Adjust the water hardness. SAV w, SAV - 15 MIN., 30 MIN., 1 HRS. 15 HRS. INIT RINS, C-RINS PRODUCT, ALL PROD., MACHIN T Choose whether you want to operate your IMPRSSA with or without energy-saving mode. T Set the time after which the IMPRSSA should switch off automatically. T Change the settings for the switch-on rinse and the cappuccino rinse. T Reset the machine or the permanently set values of all products to the factory settings. 22

23 4 Permanent settings in programming mode Programme item Sub-item xplanation INFO COUNTR, CLAN, DSCAL (only if filter T Keep track of all products prepared and view the number of maintenance programmes performed and the maintenance status. is not activated), FILTR (only if filter is activated), VRSION DISPLAY ML, OZ T Select the unit for the amount of water. LANGUAG XIT T Select your language. T xit programming mode. Product settings In the programme item BUTTONS you can make individual settings for all speciality coffees and hot water. The following permanent settings can be made: Product Amount Coffee strength Temperature Ristretto, espresso, coffee 2 ristretti, 2 espressi, 2 coffees Cappuccino Volume: 25 ML 240 ML Volume: 25 ML 240 ML (per cup) Volume: 25 ML 240 ML Amount of milk foam: 3 SK. 120 SK. MILD, NORMAL, STRONG, XTRA MILD, NORMAL, STRONG, XTRA NORMAL, HIGH NORMAL, HIGH NORMAL, HIGH Steam 3 SK. 120 SK. Hot water Volume: NORMAL, HOT, 25 ML 450 ML LOW Permanent settings in programming mode always follow the same model. xample: Proceed as follows to change the coffee strength for one coffee from NORMAL to STRONG. Precondition: RADY is displayed. k T Press and hold the Rotary Switch until RINS appears. 23

24 4 Permanent settings in programming mode g T Turn the Rotary Switch until BUTTONS is displayed. k T Press the Rotary Switch to enter the programme item. SLCT BUTTON Next select the button of the product for which you would like to make settings. No product is prepared at this point. To change the setting for a double product, press the corresponding symbol twice within 2 seconds. > T Press the Coffee button. 1 COFF appears briefly on the display. VOLUM g T Turn the Rotary Switch until STRNGTH is displayed. k T Press the Rotary Switch to enter the programme item. NORMAL g T Turn the Rotary Switch until STRONG is displayed. k T Press the Rotary Switch to confirm the setting. OK appears briefly on the display. STRNGTH g T Turn the Rotary Switch until XIT is displayed. k T Press the Rotary Switch to exit the programme item. BUTTONS g T Turn the Rotary Switch until XIT is displayed. k T Press the Rotary Switch to exit programming mode. RADY Setting the water hardness If you are using the CLARIS Blue filter cartridge and have activated it, it is not possible to set the water hardness. The harder the water is, the more frequently the IMPRSSA needs to be descaled. It is therefore important to set the water hardness accurately. The water hardness can be adjusted on a continuous scale between 1 dh and 30 dh. xample: Proceed as follows to change the water hardness setting from 16 dh to 25 dh. Precondition: RADY is displayed. k T Press and hold the Rotary Switch until RINS appears. g T Turn the Rotary Switch until HARDNSS is displayed. 24

25 4 Permanent settings in programming mode k T Press the Rotary Switch to enter the programme item. 16 dh g T Turn the Rotary Switch until 25 dh is displayed. k T Press the Rotary Switch to confirm the setting. OK appears briefly on the display. HARDNSS g T Turn the Rotary Switch until XIT is displayed. k T Press the Rotary Switch to exit programming mode. RADY nergy-saving mode The energy-saving mode (nergy Save Mode,.S.M. ) helps you to prevent your machine from consuming power unnecessarily and to actively save energy: U NRGY w U Soon after the last preparation, the IMPRSSA stops heating up. After about 5 minutes the message NRGY ON is displayed. U Before you can prepare a speciality coffee, steam or hot water, the machine must heat up. U NRGY - U All speciality coffees as well as hot water can be prepared without having to wait. U Before you can prepare steam, the machine must heat up. xample: Proceed as follows to change the energy-saving mode from NRGY w to NRGY -. Precondition: RADY is displayed. k T Press and hold the Rotary Switch until RINS appears. g T Turn the Rotary Switch until NRGY w is displayed. k T Press the Rotary Switch to enter the programme item. SAV w g T Turn the Rotary Switch until SAV - is displayed. k T Press the Rotary Switch to confirm the setting. OK appears briefly on the display. NRGY - g T Turn the Rotary Switch until XIT is displayed. k T Press the Rotary Switch to exit programming mode. RADY 25

26 4 Permanent settings in programming mode Automatic switch-off By instructing your IMPRSSA to automatically switch itself off, you can cut down your energy consumption. If this function is activated, your IMPRSSA switches off automatically after the preset time following the last action on the machine. You can set the automatic switch-off to 15 minutes, 30 minutes or 1 15 hours. xample: Proceed as follows to change the switch-off time from 2 HRS. to 1 HRS.. Precondition: RADY is displayed. k T Press and hold the Rotary Switch until RINS appears. g T Turn the Rotary Switch until OFF AFTR is displayed. k T Press the Rotary Switch to enter the programme item. 2 HRS. g T Turn the Rotary Switch until 1 HRS. is displayed. k T Press the Rotary Switch to confirm the setting. OK appears briefly on the display. OFF AFTR g T Turn the Rotary Switch until XIT is displayed. k T Press the Rotary Switch to exit programming mode. RADY R i n ses In the programme item RINSS you can make the following settings: U INIT RINS AUTOMATIC U The switch-on rinse is started automatically. INIT RINS MANUAL U U U The switch-on rinse must be started manually. C-RINS AFTR 10' U You are prompted to rinse the cappuccino frother 10 minutes after preparing cappuccino or milk foam. U C-RINS NOW U You are prompted to rinse the cappuccino frother immediately after preparing cappuccino or milk foam. xample: Proceed as follows to make the machine prompt you to perform cappuccino frother rinsing immediately after preparing a cappuccino or milk foam. 26

27 4 Permanent settings in programming mode Precondition: RADY is displayed. k T Press and hold the Rotary Switch until RINS appears. g T Turn the Rotary Switch until RINSS is displayed. k T Press the Rotary Switch to enter the programme item. INIT RINS g T Turn the Rotary Switch until C-RINS is displayed. k T Press the Rotary Switch to enter the programme item. AFTR 10' g T Turn the Rotary Switch until NOW is displayed. k T Press the Rotary Switch to confirm the setting. OK appears briefly on the display. C-RINS g T Turn the Rotary Switch until XIT is displayed. k T Press the Rotary Switch to exit the programme item. RINSS g T Turn the Rotary Switch until XIT is displayed. k T Press the Rotary Switch to exit programming mode. RADY Restore factory settings U In the programme item RST ALL you can reset various settings to their factory settings: U PRODUCT U The settings (amount, coffee strength and temperature) for any product can be reset individually to the factory settings. The corresponding double product is also reset to the factory settings at the same time. ALL PROD. U The settings (amount, coffee strength and temperature) for all products are reset to the factory settings. U MACHIN U All user settings (apart from the filter and water hardness ) are reset to factory settings. Your IMPRSSA then switches off. xample: Proceed as follows to reset the values for spresso to the factory settings. Precondition: RADY is displayed. k T Press and hold the Rotary Switch until RINS appears. g T Turn the Rotary Switch until RST ALL is displayed. 27

28 4 Permanent settings in programming mode k T Press the Rotary Switch to enter the programme item. PRODUCT k T Press the Rotary Switch. SLCT BUTTON < T Press the spresso button. OK appears briefly on the display. PRODUCT g T Turn the Rotary Switch until XIT is displayed. k T Press the Rotary Switch to exit the programme item. RST ALL g T Turn the Rotary Switch until XIT is displayed. k T Press the Rotary Switch to exit programming mode. RADY Querying information In the programme item INFO you can view the following information: U Number of products prepared U Number of maintenance programmes performed (cleaning, descaling, filter changes) and maintenance status Software version U xample: Proceed as follows to view the number of coffees prepared. Precondition: RADY is displayed. k T Press and hold the Rotary Switch until RINS appears. g T Turn the Rotary Switch until INFO is displayed. k T Press the Rotary Switch to enter the programme item. COUNTR k T Press the Rotary Switch to enter the programme item. 250 (example), the total number of all products prepared is displayed. > T Press the Coffee button. 1 COFF 80 (example), the number of coffees prepared is displayed. Press the Coffee button > again to view the number of double products. g T Turn the Rotary Switch to view additional information. 28

29 4 Permanent settings in programming mode k The maintenance status can also be displayed in addition to the number of performed maintenance programmes. The bar shows the current maintenance status. When the bar is completely filled, your IMPRSSA will request the respective maintenance programme. T Press the Rotary Switch to exit the programme item. COUNTR Turn the Rotary Switch g to view additional information. g T Turn the Rotary Switch until XIT is displayed. k T Press the Rotary Switch to exit the programme item. INFO g T Turn the Rotary Switch until XIT is displayed. k T Press the Rotary Switch to exit programming mode. RADY Unit for amount of water In the programme item DISPLAY you can select the unit used for the amount of water. xample: Proceed as follows to change the unit for the amount of water from ML to OZ. Precondition: RADY is displayed. k T Press and hold the Rotary Switch until RINS appears. g T Turn the Rotary Switch until DISPLAY is displayed. k T Press the Rotary Switch to enter the programme item. ML g T Turn the Rotary Switch until OZ is displayed. k T Press the Rotary Switch to confirm the setting. OK appears briefly on the display. DISPLAY g T Turn the Rotary Switch until XIT is displayed. k T Press the Rotary Switch to exit programming mode. RADY 29

30 4 Permanent settings in programming mode Language In the programme item LANGUAG you can select the language used by your IMPRSSA. xample: Proceed as follows to change the language from NGLISH to DUTSCH. Precondition: RADY is displayed. k T Press and hold the Rotary Switch until RINS appears. g T Turn the Rotary Switch until LANGUAG is displayed. k T Press the Rotary Switch to enter the programme item. LANGUAG NGLISH g T Turn the Rotary Switch until DUTSCH is displayed. k T Press the Rotary Switch to confirm the setting. OK appears briefly on the display. SPRACH g T Turn the Rotary Switch until XIT is displayed. k T Press the Rotary Switch to exit programming mode. BRIT 30

31 5 Maintenance 5 Maintenance Your IMPRSSA has the following integrated maintenance programmes: U Rinsing the machine (RINS) U Rinsing the fine foam frother (C RINS) U Cleaning the fine foam frother (C CLANING) U Changing the filter (FILTR) U Cleaning the machine (CLAN) U Descaling the machine (DSCAL) (only if filter is not activated) Clean the machine, change the filter or descale the machine when you are prompted to do so. You can start the maintenance programmes at any time in programming mode (programme item RINS). If no action is taken in this programme item, programming mode is exited automatically after approximately 5 seconds. Your IMPRSSA will not prompt you to clean the fine foam frother. In the interests of hygiene, you should clean the fine foam frother daily when you have been preparing milk. Rinsing the machine You can initiate the rinse operation manually at any time. Precondition: RADY is displayed. T Place a receptacle under the coffee spout. k T Press and hold the Rotary Switch until RINS appears. k T Press the Rotary Switch to enter the programme item. C CLANING g T Turn the Rotary Switch until RINS is displayed. k T Press the Rotary Switch to initiate the rinse operation. RINSING, water flows out of the coffee spout. The rinse stops automatically. RADY appears on the display. 31

32 5 Maintenance Rinsing the fine foam frother This chapter applies to the professional fine foam frother and the fine foam frother. After each milk preparation, the IMPRSSA prompts you to perform a cappuccino rinse. Precondition: RINS CAPPUCCINO is displayed and the Maintenance button c lights up. T Place a receptacle under the fine foam frother. c T Press the Maintenance button. SWITCH OPN The arrow on the switch lights up. j T Turn the switch to the m position. CAPPUCCINO RINSING, the fine foam frother is rinsed. The rinse stops automatically. SWITCH CLOS appears on the display. h T Turn the switch to the position. The illuminated arrow on the switch goes out. RADY appears on the display. Cleaning the fine foam frother This chapter applies to the professional fine foam frother and the fine foam frother. To ensure that the fine foam frother always works properly, you must clean it daily when you have been preparing milk. Your IMPRSSA will not prompt you to clean the fine foam frother. CAUTION If the wrong cleaning agent is used, the machine could be damaged and/or traces could be left behind in the water. T Use only original JURA maintenance products. JURA Cappuccino Cleaner is available from specialised dealers. Precondition: RADY is displayed. k T Press and hold the Rotary Switch until RINS appears. k T Press the Rotary Switch to enter the programme item. C CLANING k T Press the Rotary Switch. CLANR FOR CAPPU. 32

33 5 Maintenance T Remove the milk pipe from the milk container or carton. T Pour 250 ml of fresh water into a receptacle and add one capful of Cappuccino Cleaner. T Immerse the milk pipe in the receptacle. T Place a receptacle under the fine foam frother. k T Press the Rotary Switch. HATING / STAM As soon as the machine has heated up, SWITCH OPN appears. The arrow on the switch lights up. j T Turn the switch to the m position. CAPPUCCINO CLANING, the fine foam frother and the milk pipe are cleaned. SWITCH CLOS h T Turn the switch to the position. WATR FOR CAPPUCCINO T Rinse the receptacle thoroughly, fill it with 250 ml of fresh water and immerse the milk pipe in the water. T mpty the other receptacle and place it under the fine foam frother once more. j T Turn the switch to the m position. CAPPUCCINO CLANING, the fine foam frother and the milk pipe are rinsed with fresh water. SWITCH CLOS h T Turn the switch to the position. The illuminated arrow on the switch goes out. RADY appears on the display. Dismantling and rinsing the fine foam frother To make sure the fine foam frother works properly, and in the interests of hygiene, it must be dismantled and rinsed daily if you have been preparing milk. Your IMPRSSA will not prompt you to dismantle and rinse the frother. T Remove the milk pipe and rinse it thoroughly under running water. T Carefully remove the fine foam frother from the Connector System by twisting slightly. 33

34 5 Maintenance T Dismantle the fine foam frother into its individual parts. T Rinse all the parts of the fine foam frother thoroughly under running water. If there are severely dried-on milk residues, firstly immerse the individual parts in JURA Cappuccino Cleaner and then rinse them thoroughly. T Re-assemble the fine foam frother. nsure that all individual parts are correctly and firmly connected to ensure optimum operation. T Firmly attach the fine foam frother to the Connector System. Dismantling and rinsing the professional fine foam frother To make sure the professional fine foam frother works properly, and in the interests of hygiene, it must be dismantled and rinsed daily if you have been preparing milk. Your IMPRSSA will not prompt you to dismantle and rinse the frother. T Remove the milk pipe and rinse it thoroughly under running water. T Carefully remove the professional fine foam frother from the Connector System by twisting slightly. T Dismantle the professional fine foam frother into its individual parts. T Rinse all the parts of the professional fine foam frother thoroughly under running water. If there are severely dried-on milk residues, firstly immerse the individual parts in JURA Cappuccino Cleaner and then rinse them thoroughly. T Re-assemble the professional fine foam frother. nsure that all individual parts are correctly and firmly connected to ensure optimum operation. T Firmly attach the professional fine foam frother to the Connector System. 34

35 5 Maintenance Inserting and activating the filter Your IMPRSSA no longer has to be descaled if you are using the CLARIS Blue filter cartridge. If you did not activate the filter cartridge the first time you used the machine, you can do this now as follows. Perform the inserting the filter operation without any interruptions. This will ensure that your IMPRSSA always produces its best. Precondition: RADY is displayed. k T Press and hold the Rotary Switch until RINS appears. g T Turn the Rotary Switch until FILTR - is displayed. k T Press the Rotary Switch to enter the programme item. NO g T Turn the Rotary Switch until YS is displayed. k T Press the Rotary Switch to confirm the setting. OK appears briefly on the display. FILTR INSRT T Remove and empty the water tank. T Open the filter holder. T Remove the CLARIS Blue filter cartridge from the Welcome Pack. T Insert the CLARIS Blue filter cartridge into the water tank, exerting slight pressure. T Close the filter holder. It will click into place audibly. After two months, the filter will cease to work. Set the date on the date plate on the filter holder in the water tank. T Fill the water tank with fresh, cold water and reinsert the tank. T Place a receptacle (at least 300 ml) under the fine foam frother. k T Press the Rotary Switch. SWITCH OPN The arrow on the switch lights up. j T Turn the switch to the m position. FILTR RINSING, water flows out of the fine foam frother. 35

36 5 Maintenance You can interrupt rinsing of the filter at any time. To do this, turn the switch clockwise. Turn the switch anticlockwise to continue rinsing the filter. The water may be slightly discoloured. This is not harmful to health and does not affect the taste. Rinsing of the filter stops automatically after approximately 300 ml. SWITCH CLOS appears on the display. h T Turn the switch to the position. The illuminated arrow on the switch goes out. HATING, the machine heats up. RADY appears on the display. The filter is now activated. Changing the filter After 50 litres of water have flowed through, the filter will cease to work. Your IMPRSSA will automatically prompt you to change the filter. After two months, the filter will cease to work. Set the date on the date plate on the filter holder in the water tank. If the CLARIS Blue filter cartridge is not activated in programming mode, you will not be prompted to change the filter. CLARIS filter cartridges are available from specialised dealers. Precondition: RADY / FILTR is displayed and the Maintenance button c lights up. c T Press the Maintenance button. FILTR CHANG T Remove and empty the water tank. T Open the filter holder and remove the old CLARIS Blue filter cartridge. T Insert a new CLARIS Blue filter cartridge into the water tank, exerting slight pressure. T Close the filter holder. It will click into place audibly. T Fill the water tank with fresh, cold water and reinsert the tank. 36

37 5 Maintenance T Place a receptacle (at least 300 ml) under the fine foam frother. k T Press the Rotary Switch. SWITCH OPN The arrow on the switch lights up. j T Turn the switch to the m position. FILTR RINSING, water flows out of the fine foam frother. You can interrupt rinsing of the filter at any time. To do this, turn the switch clockwise. Turn the switch anticlockwise to continue rinsing the filter. The water may be slightly discoloured. This is not harmful to health and does not affect the taste. Rinsing of the filter stops automatically after approximately 300 ml. SWITCH CLOS appears on the display. h T Turn the switch to the position. The illuminated arrow on the switch goes out. HATING, the machine heats up. RADY appears on the display. Cleaning the machine CAUTION After 200 preparations or 80 switch-on rinses, the IMPRSSA will prompt you to clean it. If the wrong cleaning agent is used, the machine could be damaged and/or traces could be left behind in the water. T Use only original JURA maintenance products. The cleaning programme lasts approximately 20 minutes. Do not interrupt the cleaning programme. The quality of cleaning will be impaired if you do so. JURA cleaning tablets are available from specialised dealers. Precondition: RADY / CLAN is displayed and the Maintenance button c lights up. c T Press the Maintenance button. MPTY TRAY 37

38 5 Maintenance c T mpty the drip tray and coffee grounds container and put them back into the machine. PRSS RINS, the Maintenance button c lights up. T Place a receptacle under the coffee spout. T Press the Maintenance button. CLANING, water flows out of the coffee spout. The operation is interrupted, ADD TABLT. T Open the cover of the filler funnel for ground coffee. c T Insert a JURA cleaning tablet into the filler funnel. T Close the cover of the filler funnel. PRSS RINS, the Maintenance button c lights up. T Press the Maintenance button. CLANING, water flows out of the coffee spout several times. The operation stops automatically. MPTY TRAY T mpty the drip tray and coffee grounds container and put them back into the machine. HATING RADY appears on the display. Cleaning is now complete. Your IMPRSSA is once more ready for use. Descaling the machine J CAUTION CAUTION The IMPRSSA builds up deposits of limescale over time and automatically prompts you to descale it when necessary. The degree of calcification depends on the hardness of your water. If the descaling agent comes into contact with the skin or eyes, this can cause irritation. T Avoid contact with the skin or eyes. T Rinse off the descaling agent with clean water. Should you get any descaling agent in your eye, see a doctor. If the wrong descaling agent is used, the machine could be damaged and/or traces could be left behind in the water. T Use only original JURA maintenance products. 38

39 5 Maintenance CAUTION CAUTION If the descaling operation is interrupted, there may be damage to the machine. T Allow the descaling programme to run to the end. If the descaling agent comes into contact with sensitive surfaces (e.g. marble), damage cannot be ruled out. T Clean up any splashes immediately. The descaling programme lasts approximately 45 minutes. JURA descaling tablets are available from specialised dealers. If you use a CLARIS Blue filter cartridge and this is activated, you will not be prompted to descale. Precondition: RADY / DSCAL is displayed and the Maintenance button c lights up. c T Press the Maintenance button. MPTY TRAY T mpty the drip tray and coffee grounds container and put them back into the machine. AGNT IN TANK T Remove and empty the water tank. T Completely dissolve the contents of one blister (3 JURA descaling tablets) in a receptacle holding 500 ml of water. This may take several minutes. T Pour the solution into the empty water tank and insert it into the machine. SWITCH OPN The arrow on the switch lights up. T Carefully remove the fine foam frother from the Connector System by twisting slightly. T Place a receptacle (at least 500 ml) under the Connector System. j T Turn the switch to the m position. DSCALING, water flows out of the Connector System several times. The Maintenance button c flashes during the descaling operation. The operation is interrupted, SWITCH CLOS. 39

IMPRESSA C60/C65 Instructions for Use

IMPRESSA C60/C65 Instructions for Use IMPRSSA C60/C65 Instructions for Use Table of contents Your IMPRSSA C60/C65 Control elements 4 Important information 6 Proper use...6 For your safety...6 1 Preparing and using for the first time 10 JURA

More information

IMPRESSA F7 Instructions for Use

IMPRESSA F7 Instructions for Use IMPRSSA F7 Instructions for Use K For your safety: read and understand manual before use. Table of contents Your IMPRSSA F7 IMPORTANT SAFGUARDS 4 Control elements 8 1 Preparing and using for the first

More information

IMPRESSA C60/C65 Instructions for Use. For your safety: read and understand manual before use.

IMPRESSA C60/C65 Instructions for Use. For your safety: read and understand manual before use. IMPRSSA C60/C65 Instructions for Use K For your safety: read and understand manual before use. Table of contents Your IMPRSSA C60/C65 IMPORTANT SAFGUARDS 4 Control elements 8 1 Preparing and using for

More information

IMPRESSA Z9 One Touch TFT Instructions for Use

IMPRESSA Z9 One Touch TFT Instructions for Use IMPRSSA Z9 One Touch TFT Instructions for Use The Instructions for Use has been awarded the seal of approval by the independent German Technical Inspection Agency, TÜV SÜD, due to its easy-to-understand

More information

Z6 Instructions for Use

Z6 Instructions for Use Z6 Instructions for Use Table of contents Your Z6 Control elements 4 Important information 6 Proper use...6 For your safety...6 1 Preparing and using for the first time 10 JURA on the Internet...10 Setting

More information

Symbol description READY. Warnings. Symbols used

Symbol description READY. Warnings. Symbols used en Instructions for Use The Instructions for Use has been awarded the seal of approval by the independent German Technical Inspection Agency, TÜV SÜD, due to its easy-to-understand style, its thoroughness

More information

Instructions for use for ENA Micro 9

Instructions for use for ENA Micro 9 de en fr micro 9 it nl es Instructions for use for NA Micro 9 pt The Instructions for Use has been awarded the seal of approval by the independent German Technical Inspection Agency, TÜV SÜD, due to its

More information

IMPRESSA XJ9 Professional Instructions for Use. Original instructions for use Before using the machine read the instructions for use.

IMPRESSA XJ9 Professional Instructions for Use. Original instructions for use Before using the machine read the instructions for use. IMPRSSA XJ9 Professional Instructions for Use K Original instructions for use Before using the machine read the instructions for use. JURA Type 683 Table of contents Your IMPRSSA XJ9 Professional Control

More information

The IMPRESSA J7 Manual

The IMPRESSA J7 Manual The IMPRSSA J7 Manual The IMPRSSA Manual has been awarded the seal of approval by the independent German Technical Inspection Agency, TÜV SÜD, due to its easy-to-understand style, its thoroughness and

More information

E8/E80 Instructions for Use

E8/E80 Instructions for Use 8/80 Instructions for Use Table of contents Your 8/80 Control elements 4 Important information 6 Proper use...6 For your safety...6 1 Preparing and using for the first time 10 JURA on the Internet...10

More information

IMPRESSA Z7 One Touch Voice Instructions for Use

IMPRESSA Z7 One Touch Voice Instructions for Use IMPRSSA Z7 One Touch Voice Instructions for Use The Instructions for Use has been awarded the seal of approval by the independent German Technical Inspection Agency, TÜV SÜD, due to its easy-to-understand

More information

S8 Instructions for Use Type 744

S8 Instructions for Use Type 744 S8 Instructions for Use Type 744 Table of contents Your S8 Control elements 4 Important information 6 Proper use...6 For your safety...6 1 Preparing and using for the first time 10 JURA on the Internet...10

More information

GIGA 5 Instructions for Use

GIGA 5 Instructions for Use GIGA 5 Instructions for Use The Instructions for Use has been awarded the seal of approval by the independent German Technical Inspection Agency, TÜV SÜD, due to its easy-to-understand style, its thoroughness

More information

E6/E60 Instructions for Use

E6/E60 Instructions for Use 6/60 Instructions for Use Table of contents Your 6/60 Control elements 4 Important information 6 Proper use...6 For your safety...6 1 Preparing and using for the first time 10 JURA on the Internet...10

More information

E8/E80 Instructions for Use

E8/E80 Instructions for Use 8/80 Instructions for Use Table of contents Your 8/80 Control elements 4 Important information 6 Proper use...6 For your safety...6 1 Preparing and using for the first time 10 JURA on the Internet...10

More information

Instructions for use for A1/A100

Instructions for use for A1/A100 de en fr it nl es pt Instructions for use for A1/A100 ru Your A1/A100 Control elements 28 Important information 30 Proper use...30 For your safety...30 1 Preparing and using for the first time 32 Setting

More information

Z8 Instructions for Use

Z8 Instructions for Use Z8 Instructions for Use Table of contents Your Z8 Control elements 4 Important information 6 Proper use...6 For your safety...6 1 Preparing and using for the first time 10 JURA on the Internet...10 Operation

More information

Instructions for use for ENA Micro 5

Instructions for use for ENA Micro 5 de en fr it nl es pt Instructions for use for ENA Micro 5 ru Table of contents Your ENA Micro 5 Control elements 30 Important information 32 Proper use...32 For your safety...32 1 Preparing and using for

More information

GIGA 5 Instructions for Use

GIGA 5 Instructions for Use GIGA 5 Instructions for Use The Instructions for Use has been awarded the seal of approval by the independent German Technical Inspection Agency, TÜV SÜD, due to its easy-to-understand style, its thoroughness

More information

The IMPRESSA XS95/XS90 One Touch and IMPRESSA XS9 Classic Manual. JURA Type 668

The IMPRESSA XS95/XS90 One Touch and IMPRESSA XS9 Classic Manual. JURA Type 668 The IMPRSSA XS95/XS90 One Touch and IMPRSSA XS9 Classic Manual K Original instructions for use Before using the machine read the instructions for use. JURA Type 668 Table of contents Your IMPRSSA Xs95/Xs90

More information

IMPRESSA XJ5 Professional Instructions for Use. Original instructions for use Before using the machine read the instructions for use.

IMPRESSA XJ5 Professional Instructions for Use. Original instructions for use Before using the machine read the instructions for use. IMPRESSA XJ5 Professional Instructions for Use KE Original instructions for use Before using the machine read the instructions for use. JURA Type 684 Table of contents Your IMPRESSA XJ5 Professional Control

More information

Instructions for Use ENA 9 One Touch

Instructions for Use ENA 9 One Touch de en fr it nl es Instructions for se NA 9 One Touch pt The Instructions for se has been awarded the seal of approval by the independent German Technical Inspection Agency, TÜV SÜD, due to its easy-to-understand

More information

IMPRESSA F8 Instructions for Use

IMPRESSA F8 Instructions for Use IMPRSSA F8 Instructions for Use K For your safety: read and understand manual before use. Table of contents Your IMPRSSA F8 IMPORTANT SAFGUARDS 4 Control elements 8 1 Preparing and using for the first

More information

Z6 Instructions for Use

Z6 Instructions for Use PROFSSIONAL AROMA GRINDR Z6 Instructions for Use Table of contents Your Z6 Control elements 4 Important information 6 Proper use...6 For your safety...6 1 Preparing and using for the first time 10 JURA

More information

X8 Instructions for Use

X8 Instructions for Use X8 Instructions for Use K Original instructions for use Before using the machine read the instructions for use. JURA Type 739 Table of contents Your X8 Control elements 4 Important information 6 Proper

More information

E6 Instructions for Use

E6 Instructions for Use 6 Instructions for Use K For your safety: read and understand manual before use. Table of contents Your 6 IMPORTANT SAFGUARDS 4 Control elements 8 1 Preparing and using for the first time 10 JURA on the

More information

JURA J90/J95 Instructions for Use

JURA J90/J95 Instructions for Use JURA J90/J95 Instructions for Use K For your safety: read and understand manual before use. Table of contents Your JURA J90/J95 IMPORTANT SAFGUARDS 4 Control elements 8 1 Preparing and using for the first

More information

IMPRESSA Z7 Instructions for Use

IMPRESSA Z7 Instructions for Use IMPRSSA Z7 Instructions for Use K For your safety: read and understand manual before use. Table of contents Your IMPRSSA Z7 IMPORTANT SAFGUARDS 4 Control elements 8 1 Preparing and using for the first

More information

GIGA X8 Professional Instructions for Use

GIGA X8 Professional Instructions for Use GIGA X8 Professional Instructions for Use K Original instructions for use Before using the machine read the instructions for use. Instructions for use has been awarded the seal of approval by the independent

More information

IMPRESSA Z9 One Touch TFT Instructions for Use. For your safety: read and understand manual before use.

IMPRESSA Z9 One Touch TFT Instructions for Use. For your safety: read and understand manual before use. IMPRSSA Z9 One Touch TFT Instructions for Use K For your safety: read and understand manual before use. Table of contents Your IMPRSSA Z9 One Touch TFT IMPORTANT SAFGUARDS 4 Control elements 8 1 Preparing

More information

J6 Instructions for Use

J6 Instructions for Use J6 Instructions for Use K For your safety: read and understand manual before use. Table of contents Your J6 IMPORTANT SAFGUARDS 4 Control elements 8 1 Preparing and using for the first time 10 JURA on

More information

Z6 Instructions for Use

Z6 Instructions for Use Z6 Instructions for Use K For your safety: read and understand manual before use. Table of contents Your Z6 IMPORTANT SAFGUARDS 4 Control elements 8 1 Preparing and using for the first time 10 JURA on

More information

IMPRESSA Z7 Instructions for Use

IMPRESSA Z7 Instructions for Use IMPRSSA Z7 Instructions for se The Instructions for se has been awarded the seal of approval by the independent German Technical Inspection Agency, TÜV SÜD, due to its easy-to-understand style, its thoroughness

More information

ENA 8 Instructions for Use

ENA 8 Instructions for Use de en fr it nl es NA 8 Instructions for se pt ru Table of contents Your NA 8 Control elements 36 Important information 38 Proper use...38 For your safety...38 1 Preparing and using for the first time 40

More information

GIGA X3c Professional Instructions for Use

GIGA X3c Professional Instructions for Use GIGA X3c Professional Instructions for Use K Original instructions for use Before using the machine read the instructions for use. Instructions for use has been awarded the seal of approval by the independent

More information

Figure: Your machine may look different to the one shown. D6 Instructions for Use. For your safety: read and understand manual before use.

Figure: Your machine may look different to the one shown. D6 Instructions for Use. For your safety: read and understand manual before use. Figure: Your machine may look different to the one shown. D6 Instructions for Use K E For your safety: read and understand manual before use. Table of contents Your D6 IMPORTANT SAFEGUARDS 4 Control elements

More information

Figure: Your machine may look different to the one shown. S8 Instructions for Use. For your safety: read and understand manual before use.

Figure: Your machine may look different to the one shown. S8 Instructions for Use. For your safety: read and understand manual before use. Figure: Your machine may look different to the one shown. S8 Instructions for Use K For your safety: read and understand manual before use. Table of contents Your S8 IMPORTANT SAFGUARDS 4 Control elements

More information

The IMPRESSA S9 One Touch Classic Manual. For your safety: read and understand manual before use.

The IMPRESSA S9 One Touch Classic Manual. For your safety: read and understand manual before use. Figure: Your machine may look different to the one shown. The IMPRSSA S9 One Touch Classic Manual K For your safety: read and understand manual before use. Table of contents Your IMPRSSA S9 One Touch Classic

More information

X8 Instructions for Use. For your safety: read and understand manual before use. JURA Type 739

X8 Instructions for Use. For your safety: read and understand manual before use. JURA Type 739 X8 Instructions for Use K For your safety: read and understand manual before use. JURA Type 739 Table of contents Your X8 IMPORTANT SAFGUARDS 4 Control elements 8 1 Preparing and using for the first time

More information

GIGA X8c Instructions for Use. Original instructions for use Before using the machine read the instructions for use. JURA Type 749

GIGA X8c Instructions for Use. Original instructions for use Before using the machine read the instructions for use. JURA Type 749 GIGA X8c Instructions for Use K Original instructions for use Before using the machine read the instructions for use. JURA Type 749 Table of contents Your GIGA X8c Control elements 4 Important information

More information

GIGA X7 Professional Instructions for Use. For your safety: read and understand manual before use. JURA Type 677

GIGA X7 Professional Instructions for Use. For your safety: read and understand manual before use. JURA Type 677 GIGA X7 Professional Instructions for Use K For your safety: read and understand manual before use. JURA Type 677 Table of contents Your GIGA X7 Professional IMPORTANT SAFGUARDS 4 Control elements 8 1

More information

The IMPRESSA S9 One Touch Manual

The IMPRESSA S9 One Touch Manual The IMPRSSA S9 One Touch Manual The IMPRSSA Manual has been awarded the seal of approval by the independent German Technical Inspection Agency, TÜV SÜD, due to its easy-to-understand style, its thoroughness

More information

CafeRomatica NICR7.. Fully automatic coffee centre Operating Instructions and Useful Tips. A passion for coffee.

CafeRomatica NICR7.. Fully automatic coffee centre Operating Instructions and Useful Tips. A passion for coffee. CafeRomatica Fully automatic coffee centre Operating Instructions and Useful Tips NICR7.. GB A passion for coffee. 1 G F A M J / K A B C D E Display screen Left rotary knob Right rotary knob Bean symbol

More information

1. IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric

1. IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric 1. IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/pr injury to persons including the following:

More information

Quick Reference Guide

Quick Reference Guide Impressa Z5 Quick Reference Guide This Guide does not replace the Operating Instructions. For details and cautions you must read all instructions. Watch the DVD instructions! Traces of Coffee Grounds in

More information

G F I M J K L B C D E S O T H Q P U N R D 4

G F I M J K L B C D E S O T H Q P U N R D 4 1 2 3 4 G F I A M J K L 5 6 7 B C D E 8 9 10 S O T H Q P U N R 11 12 D 4 Equipment GB A B C D E Text display (main menu) Rotary control knob Button > Button exit Height-adjustable coffee spout CafeRomatica

More information

Jura Impressa XF50. Operating & cleaning Instructions Malvern Road Glen Iris VIC 3146 ph: fax:

Jura Impressa XF50. Operating & cleaning Instructions Malvern Road Glen Iris VIC 3146 ph: fax: Jura Impressa XF50 Operating & cleaning Instructions 1473-1475 Malvern Road Glen Iris VIC 3146 93/1-5 Harwood Street Pyrmont NSW 2009 clientservices@mycoffeeshop.com.au 1300 365 487 www.mycoffeeshop.com.au

More information

Z Close supervision is necessary when any appliance is used by or near children.

Z Close supervision is necessary when any appliance is used by or near children. Instructions for Use The NA 3 Instructions for Use has be awarded the seal of approval by the indepdt German Technical Inspection Agcy, TÜV SÜD, due to s easy-to-understand style, s thoroughness and coverage

More information

IMPORTANT SAFEGUARDS SAVE THESE INSTRUCTIONS Z Z Z Z Z

IMPORTANT SAFEGUARDS SAVE THESE INSTRUCTIONS Z Z Z Z Z en de Instructions for Use fr he NA 5 Instructions for Use has been awarded the seal of approval by the independent German echnical Inspection Agency, ÜV SÜD, due to s easy-to-understand style, s thoroughness

More information

5KEK1322 W A_v08.indd 1 5/13/16 2:25 PM

5KEK1322 W A_v08.indd 1 5/13/16 2:25 PM 5KEK1322 W10878653A_v08.indd 1 PARTS AND FEATURES PARTS AND ACCESSORIES Tea steeper lid (center section of lid with handle) Kettle lid (outer section) Stainless steel lime scale filter Removable stainless

More information

Art Xs95/Xs90 GB 03/ /1806/0905/2000. IMPRESSA Xs95 / Xs90 Short operating instructions

Art Xs95/Xs90 GB 03/ /1806/0905/2000. IMPRESSA Xs95 / Xs90 Short operating instructions Art. 65594 Xs95/Xs90 GB 03/06 0044494/1806/0905/2000 IMPRESSA Xs95 / Xs90 Short operating instructions Control elements Control elements 15 14 13 12 11 10 9 8 7 3 27 6 5 16 17 18 19 20 21 22 23 24 25 1.

More information

SAFETY INSTRUCTIONS FOR USE

SAFETY INSTRUCTIONS FOR USE INTRODUCTION Thank you for choosing this De Longhi Coffee machine. We hope you enjoy your new appliance. Please take a few minutes to read these instructions. This is the only way to ensure optimum results

More information

Get Started. Better Everyday ECAM23260

Get Started. Better Everyday ECAM23260 Better Everyday Get Started This short guide is not intended to explain all the functions of the appliance. Please read all the owner s instruction booklet before use. Video available on www.youtube.com/delonghiusa

More information

IMPORTANT SAFEGUARDS. 3. To protect against fire, electric shock and injury to persons do not immerse cord, plug or unit in water or other liquid.

IMPORTANT SAFEGUARDS. 3. To protect against fire, electric shock and injury to persons do not immerse cord, plug or unit in water or other liquid. IMPORTANT SAFEGUARDS When using electrical appliances, basic precautions should always be followed, including the following: 1. Read all instructions. 2. Make sure that your outlet voltage corresponds

More information

Automatic Coffee Machine Instruction Manual

Automatic Coffee Machine Instruction Manual Instruction Manual Page 1 of 17 8212-0 Automatic Coffee Machine Instruction Manual Instruction Manual Page 2 of 17 IMPORTANT INFORMATION For safety purposes please read these instructions carefully before

More information

MODEL: POD BREWER AURORA SAF 68 HOMEMAKER ESPRESSO MAKER WITH COFFEE POD

MODEL: POD BREWER AURORA SAF 68 HOMEMAKER ESPRESSO MAKER WITH COFFEE POD INSTRUCTION MANUAL Please read this Instruction Manual and the safety instructions before operating the appliance! MODEL: POD BREWER AURORA SAF 68 HOMEMAKER ESPRESSO MAKER WITH COFFEE POD Congratulation

More information

USER MANUAL TECHNICAL DATA

USER MANUAL TECHNICAL DATA USER MANUAL TECHNICAL DATA Model: Easy Touch Operating Voltage: 240V AC Frequency: 50 Hz Power con, MAX : 1500W Water tank cap.: 700ml (0.7L) Weight: 5.0 kg Size: L 350 * W 155 * H 245 mm This appliance

More information

Get Started. Better Everyday ECAM26455

Get Started. Better Everyday ECAM26455 Better Everyday Get Started This short guide is not intended to explain all the functions of the appliance. Please read all the owner s instruction booklet before use. ECAM26455 WELCOME Introducing the

More information

Fully Automatic Coffee Machine OPERATION MANUAL

Fully Automatic Coffee Machine OPERATION MANUAL Fully Automatic Coffee Machine OPERATION MANUAL Instructions of coffee machine parts 7 8 1 9 2 10 12 13 14 15 3 16 11 4 5 6 1 Bean container cover 9 Bean container 2 Water tank lid 10 Coffee spout 3 Water

More information

This appliance can be used by children aged from 8 years and above and persons with

This appliance can be used by children aged from 8 years and above and persons with IMPORTANT SAFEGUARDS Symbols used in these instructions Important warnings are identified by these symbols. It is vital to respect these warnings. Failure to observe the warning could result in life threatening

More information

Type HD8753 USER MANUAL

Type HD8753 USER MANUAL Register your product and get support at www.philips.com/welcome 02 English Type HD8753 USER MANUAL 02 EN PLEASE READ THIS USER MANUAL CAREFULLY BEFORE USING THE MACHINE. IMPORTANT SAFEGUARDS When using

More information

Operating Instructions Bedienungsanleitung

Operating Instructions Bedienungsanleitung SVENSKA NORSK DANSK SUOMI Operating Instructions Bedienungsanleitung Table of contents Table of contents 1 For your safety... 5 1.1 Symbols used... 6 1.2 Proper use... 6 1.3 Danger from electric current...

More information

Viktig information om bruksanvisningen till din nya helautomatiska kaffespecialitetsmaskin

Viktig information om bruksanvisningen till din nya helautomatiska kaffespecialitetsmaskin J de Wichtige Information zur Bedienungsanleitung Ihres neuen Kaffeespezialitäten- Vollautomaten Die beiliegende Bedienungsanleitung für die ENA Micro 9 gilt uneingeschränkt für Ihre ENA Micro 8. en Important

More information

EN Operating Instructions 21

EN Operating Instructions 21 EN Operating Instructions 21 7 6 5 4 8 9 10 3 11 2 1 A 14 13 11 B C D E F G H I 3 Safety instructions Please carefully read and comply with the operating instructions. The appliance is intended for home

More information

Operating instructions COFFEE BREWER 1/0

Operating instructions COFFEE BREWER 1/0 Operating instructions COFF BRWR GB 1 / 0 1/0 Operating instructions nglish 1.1 Introduction We are delighted that you have chosen one of our quality products. The machines have been specifically designed

More information

Coffee Burr Grinder. Model #559. Instructions. Warranty

Coffee Burr Grinder. Model #559. Instructions. Warranty Coffee Burr Grinder Model #559 Instructions Warranty IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions.

More information

coffee wakes up the world User Manual Coffee machine English V0.16

coffee wakes up the world User Manual Coffee machine English V0.16 coffee wakes up the world User Manual Coffee machine English V0.16 Valid for all WMF 900 models Series 900 Order number 33 2624 2010 Edition 05.2014 Congratulations on the purchase of your WMF coffee machine.

More information

BEAN TO CUP ESPRESSO AND CAPPUCCINO MACHINE. Instruction for use ECAM26.455

BEAN TO CUP ESPRESSO AND CAPPUCCINO MACHINE. Instruction for use ECAM26.455 2 5713216211/05.11 BEAN TO CUP ESPRESSO AND CAPPUCCINO MACHINE Instruction for use ECAM26.455 1 B2 B3 B4 B5 B6 B1 B7 B13 B8 B9 B10 B11 B12 D1 C2 D2 C1 C3 C4 A18 C5 D3 D4 C6 D5 D6 2 A1 A2 A3 A4 A5 A6 A11

More information

EP3559, EP3558 EP3551, EP3550

EP3559, EP3558 EP3551, EP3550 Super automatic espresso machine 3100 series EP3559, EP3558 EP3551, EP3550 EN USER MANUAL DE BENUTZERHANDBUCH ES MANUAL DEL USUARIO FR MODE D EMPLOI IT MANUALE UTENTE NL GEBRUIKSAANWIJZING 1 EP3558, EP3550

More information

Coffee Grinder Instruction Manual

Coffee Grinder Instruction Manual Coffee Grinder Instruction Manual CoffeeGrinder Manual-English Only.indd 1 07/01/2016 14:14:39 Savisto Home Coffee Grinder Voltage Supply: 220-240V~ 50/60Hz Power Consumption: 150W Eng Please read through

More information

Instructions for use for A1

Instructions for use for A1 fr Instructions for use for A1 es K E For your safety: read and understand manual before use. pt Table of contts Your A1 IMPORTANT SAFEGUARDS 4 Control elemts 8 1 Preparing and using for the first time

More information

COFFEE MAKER INSTRUCTION MANUAL CM4682-V

COFFEE MAKER INSTRUCTION MANUAL CM4682-V COFFEE MAKER INSTRUCTION MANUAL CM4682-V IMPORTANT SAFEGUARDS Before using the electrical appliance, the following basic precautions should always be followed including the following: 1. Read all instructions.

More information

USER MANUAL Type HD HD8885

USER MANUAL Type HD HD8885 02 English USER MANUAL Type HD8768 - HD8885 Read carefully before using the machine. 02 EN Register your product and get support at www.saeco.com/welcome IMPORTANT SAFEGUARDS When using electrical appliances,

More information

instructions COFFEE GRINDER KG 79/89

instructions COFFEE GRINDER KG 79/89 instructions COFFEE GRINDER KG 79/89 DESCRIPTION OF APPLIANCE The following terms are used throughout the instruction manual Coffee-bean hopper lid Removable upper burr Coffee-bean hopper ON/OFF switch

More information

Jura GIGA X3. Operating & cleaning instructions Malvern Road Glen Iris VIC 3146 ph: fax:

Jura GIGA X3. Operating & cleaning instructions Malvern Road Glen Iris VIC 3146 ph: fax: Jura GIGA X Operating & cleaning instructions My Coffee Shop Pty Ltd ACN 0 80 07 7-7 Malvern Road Glen Iris VIC 6 ph: 0 996 60 fax: 0 969 806 9/- Harwood Street Pyrmont NSW 009 ph: 0 90 680 fax: 0 969

More information

Always here to help you

Always here to help you Always here to help you Register your product and get support at www.saeco.com/welcome HD8758/57 HD8758-57_4219_460_3151_1_COVER_BOOKLET_A5_bl.indd 1 14/10/15 10:07 English 5 ESPRESSO 1 5 2 6 3 7 8 4

More information

Instruction Manual Coffee grinder. CM 90 Serie

Instruction Manual Coffee grinder. CM 90 Serie Instruction Manual Coffee grinder CM 90 Serie Table of content Safety Instructions... 3 Before first use... 4 Unpacking... 4 Requirements for the installation location... 5 Operating and speed settings...

More information

HD8847 HD8848 USER MANUAL. Super automatic espresso coffee machine 4000 series. Read carefully before using the machine.

HD8847 HD8848 USER MANUAL.   Super automatic espresso coffee machine 4000 series. Read carefully before using the machine. Super automatic espresso coffee machine 4000 series 02 USER MANUAL Read carefully before using the machine. HD8847 HD8848 02 English EN Register your product and get support at www.philips.com/welcome

More information

Type HD8752 / HD8881 USER MANUAL

Type HD8752 / HD8881 USER MANUAL Register your product and get support at www.philips.com/welcome 02 English Type HD8752 / HD8881 USER MANUAL 02 EN PLEASE READ THIS USER MANUAL CAREFULLY BEFORE USING THE MACHINE. IMPORTANT SAFEGUARDS

More information

HD8828 HD8834 USER MANUAL. Super automatic espresso coffee machine 3100 series. Read carefully before using the machine.

HD8828 HD8834 USER MANUAL.  Super automatic espresso coffee machine 3100 series. Read carefully before using the machine. Super automatic espresso coffee machine 3100 series 02 USER MANUAL Read carefully before using the machine. HD8828 HD8834 English 02 EN Register your product and get support at www.philips.com/welcome

More information

AUTOMATIC BEAN TO CUP COFFEE MACHINE

AUTOMATIC BEAN TO CUP COFFEE MACHINE AUTOMATIC BEAN TO CUP COFFEE MACHINE EB60 model USER GUIDE NZ AU GB IE CONTENTS Appliance parts 2 Safety and warnings 4 First use 9 Menu settings 13 Making coffee 17 Making cappuccinos and milk-based

More information

Matic / THa. Operating instructions COFFEE BREWER. Mode d emploi MACHINE À CAFÉ. Gebrauchsanleitung KAFFEEBRÜHMASCHINE

Matic / THa. Operating instructions COFFEE BREWER. Mode d emploi MACHINE À CAFÉ. Gebrauchsanleitung KAFFEEBRÜHMASCHINE Operating instructions COFFEE BREWER Mode d emploi MACHINE À CAFÉ Gebrauchsanleitung KAFFEEBRÜHMASCHINE Gebruiksaanwijzing KOFFIEZETAPPARAAT Bruksanvisning KAFFEBRYGGARE Bruksanvisning KAFFEMASKIN GB FR

More information

Gaggenau Instruction manual CM 450. Fully Automatic Espresso Machine

Gaggenau Instruction manual CM 450. Fully Automatic Espresso Machine Gaggenau Instruction manual CM 450 Fully Automatic Espresso Machine Table of contents onmanual Instructi Important safety information 3 Environmentally-friendly disposal 4 Getting to know the appliance

More information

Type HD8754 USER MANUAL

Type HD8754 USER MANUAL Register your product and get support at www.philips.com/welcome 02 English Type HD8754 USER MANUAL 02 EN PLEASE READ THIS USER MANUAL CAREFULLY BEFORE USING THE MACHINE. IMPORTANT SAFEGUARDS When using

More information

AUTOMATIC BEAN TO CUP COFFEE MACHINE

AUTOMATIC BEAN TO CUP COFFEE MACHINE AUTOMATIC BEAN TO CUP COFFEE MACHINE EB24 model USER GUIDE US CA CONTENTS Appliance parts 2 Safety and warnings 4 First use 7 Menu settings 11 Making coffee 15 Making cappuccinos and milk-based coffees

More information

AUTOMATIC BEAN TO CUP COFFEE MACHINE

AUTOMATIC BEAN TO CUP COFFEE MACHINE AUTOMATIC BEAN TO CUP COFFEE MACHINE EB60 model USER GUIDE NZ AU GB IE CONTENTS Appliance parts 2 Safety and warnings 4 First use 9 Menu settings 13 Making coffee 17 Making cappuccinos and milk-based

More information

Type HD8779 INSTRUCTIONS FOR USE

Type HD8779 INSTRUCTIONS FOR USE Register your product and get support at www.philips.com/welcome 02 English Type HD8779 INSTRUCTIONS FOR USE 02 EN PLEASE READ THIS USER MANUAL CAREFULLY BEFORE USING THE MACHINE. IMPORTANT SAFEGUARDS

More information

Bedienungsanleitung Operating Instructions

Bedienungsanleitung Operating Instructions DEUTSCH ITALIANO NEDERLANDS FRANÇAIS Bedienungsanleitung Operating Instructions 1 Table of contents Table of contents 1 For your safety...53 1.1 Symbols used...54 1.2 Proper use...54 1.3 Danger due to

More information

ENA 9 One Touch Instructions for Use

ENA 9 One Touch Instructions for Use es ENA 9 One Touch Instructions for Use pt K E For your safety: read and understand manual before use. Table of contts Your ENA 9 One Touch IMPORTANT SAFEGUARDS 4 Control elemts 8 1 Preparing and using

More information

Contents. Electrical requirements (UK only) Preparing and attaching the hot chocolate carafe (D)... 14

Contents. Electrical requirements (UK only) Preparing and attaching the hot chocolate carafe (D)... 14 Contents INTRODUCTION... 8 Symbols used in these instructions... 8 Letters in brackets... 8 Troubleshooting and repairs... 8 SAFETY... 8 Fundamental safety warnings... 8 DESIGNATED USE... 8 INSTRUCTIONS...

More information

Coffeemaker User's manual

Coffeemaker User's manual Coffeemaker User's manual EN Prior to using this appliance, please read the user's manual thoroughly, even in cases where you have previously familiarised yourself with the operation of similar types of

More information

EP5961, EP5960, EP5365 EP5364, EP5363, EP5361 EP5360

EP5961, EP5960, EP5365 EP5364, EP5363, EP5361 EP5360 Super automatic espresso machine 5000 series EP5961, EP5960, EP5365 EP5364, EP5363, EP5361 EP5360 EN USER MANUAL DA BRUGERVEJLEDNING DE BENUTZERHANDBUCH ES MANUAL DEL USUARIO FR MODE D EMPLOI IT MANUALE

More information

INSTRUCTIONS FOR USE Type HD8762

INSTRUCTIONS FOR USE Type HD8762 02 English INSTRUCTIONS FOR USE Type HD8762 Read carefully before using the machine. 02 EN Register your product and get support at www.philips.com/welcome IMPORTANT SAFEGUARDS When using electrical appliances,

More information

Type HD8749 GAGGIA NAVIGLIO DELUXE. User manual

Type HD8749 GAGGIA NAVIGLIO DELUXE. User manual Type HD8749 GAGGIA NAVIGLIO DELUXE User manual IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions.

More information

PICOBARISTO HD8924 EN DE ES FR IT NL USER MANUAL BENUTZERHANDBUCH MANUAL DEL USUARIO MODE D EMPLOI MANUALE UTENTE GEBRUIKSAANWIJZING

PICOBARISTO HD8924 EN DE ES FR IT NL USER MANUAL BENUTZERHANDBUCH MANUAL DEL USUARIO MODE D EMPLOI MANUALE UTENTE GEBRUIKSAANWIJZING PICOBARISTO HD8924 EN DE ES FR IT NL USER MANUAL BENUTZERHANDBUCH MANUAL DEL USUARIO MODE D EMPLOI MANUALE UTENTE GEBRUIKSAANWIJZING 4219.460.3607.1 HD8924 SAECO_PICOBARISTO AMF_WE_COVER_A5_FC.indd 1 01-09-16

More information

USER MANUAL Type HD HD8767

USER MANUAL Type HD HD8767 02 English USER MANUAL Type HD8766 - HD8767 Read carefully before using the machine. 02 EN Register your product and get support at www.philips.com/welcome IMPORTANT SAFEGUARDS When using electrical appliances,

More information

EP5934, EP5930, EP5346 EP5345, EP5340, EP5335 EP5334, EP5333, EP5331 EP5330, EP5045, EP5040 EP5035, EP5034, EP5030

EP5934, EP5930, EP5346 EP5345, EP5340, EP5335 EP5334, EP5333, EP5331 EP5330, EP5045, EP5040 EP5035, EP5034, EP5030 Super automatic espresso machine 5000 series EP5934, EP5930, EP5346 EP5345, EP5340, EP5335 EP5334, EP5333, EP5331 EP5330, EP5045, EP5040 EP5035, EP5034, EP5030 EN USER MANUAL DA BRUGERVEJLEDNING DE BENUTZERHANDBUCH

More information

QUALITY MILK FROTHER INSTRUCTION MANUAL MODEL NO. MMF005

QUALITY MILK FROTHER INSTRUCTION MANUAL MODEL NO. MMF005 QUALITY MILK FROTHER INSTRUCTION MANUAL MODEL NO. MMF005 MILK FROTHER INSTRUCTION MANUAL Model No.: MMF005 READ ALL INSTRUCTIONS BEFORE USING THE FROTHER. KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.

More information

USER MANUAL Type HD8772

USER MANUAL Type HD8772 02 English USER MANUAL Type HD8772 Read carefully before using the machine. 02 EN Register your product and get support at www.philips.com/welcome IMPORTANT SAFEGUARDS When using electrical appliances,

More information

TABLE OF CONTENTS. English

TABLE OF CONTENTS. English CMD ESPRESSO + SHIFT MACHINE CLICK TO INSTRUCTIONS CHANGE COPY TABLE OF CONTENTS ESPRESSO MACHINE SAFETY Important safeguards... 4 PARTS AND FEATURES Parts and accessories...11 ASSEMBLING THE ESPRESSO

More information