EasyIO 30P Temperature Table User Guide. EasyIO 30P Temp Table User Guide

Size: px

Start display at page:

Download "EasyIO 30P Temperature Table User Guide. EasyIO 30P Temp Table User Guide"

Julius Stanley
5 years ago
Views:

1 EasyIO 30P Temp Table User Guide

2 Document Change Log 16 th February 2012 Document created. 08 th May 2012 Added new temp table template. Sauter and Siemens 1K Nikel

3 Disclaimer EasyIO 30P is a product by EasyIO Corporation Ptd Ltd. The EasyIO 30P was built on the Sedona Framework. Sedona Framework is a trademark of Tridium, Inc.

4 Contents Introduction... 5 EasyioTempTable... 6 Temperature Sensor Resistance Table... 7 Honeywell 20K Thermistor... 7 Honeywell / Johnson Pt100 Platinum, (Celcius)... 8 Invensys 10K Thermistor with 11K Shunt... 9 Invensys 10K Thermistor type III Invensys / Johnson Pt1000 Platinum Invensys / TAC 10K Thermistor Type II Johnson Control 1K Nikel Sauter 1K Nikel Siemens / Landis 1K Nikel Configuring Temp Table object... 16

5 Introduction In Nov 2011, EasyIO has introduced a new kit called eayiotemptable. This kit is for user convenient of setting temp table. We did include several types of commonly used temp sensor versus resistance value. Firmware supported at the moment is as below: 1. EasyIO 30P Sedona and higher. Section below is a simple guide on configuring the temp table objects.

EasyioTempTable This kit contains 19 objects. The object is to configure the temp table via Sedona workbench, without configuring via the web browser.

6 EasyioTempTable This kit contains 19 objects. The object is to configure the temp table via Sedona workbench, without configuring via the web browser. This eliminates extra tools for configuring and backup. These objects are also good for multiple typical controller duplication. No more extra tools for temperature table configuring. To use these objects just drag and drop into the wire sheet.

7 Temperature Sensor Resistance Table Below are the objects preset temp tables. These values are just for reference. User might need to edit for precise value. Below are some commonly used temperature sensor resistance tables. Honeywell 20K Thermistor Resistance Value (Ohm) Temp Value (Celcius) Temp Value (Fahrenheit) 814, , , , , , , , , , , , , , , , , , , , ,

8 Honeywell / Johnson Pt100 Platinum, (Celcius) Resistance Value (Ohm) Temp Value (Celcius) Temp Value (Fahrenheit)

9 Invensys 10K Thermistor with 11K Shunt Resistance Value (Ohm) Temp Value (Celcius) Temp Value (Fahrenheit) 10, , , , , , , , , , , , , , , , , , , ,

10 Invensys 10K Thermistor type III Resistance Value (Ohm) Temp Value (Celcius) Temp Value (Fahrenheit) 239, , , , , , , , , , , , , , , , , , , ,

11 Invensys / Johnson Pt1000 Platinum Resistance Value (Ohm) Temp Value (Celcius) Temp Value (Fahrenheit)

12 Invensys / TAC 10K Thermistor Type II Resistance Value (Ohm) Temp Value (Celcius) Temp Value (Fahrenheit)

13 Johnson Control 1K Nikel Resistance Value (Ohm) Temp Value (Celcius) Temp Value (Fahrenheit)

14 Sauter 1K Nikel Resistance Value (Ohm) Temp Value (Celcius) Temp Value (Fahrenheit)

15 Siemens / Landis 1K Nikel Resistance Value (Ohm) Temp Value (Celcius) Temp Value (Fahrenheit)

Configuring Temp Table object Step 1: Manage kits to install

easyiotemptable from Sedona Palette - Drag & drop the any

The TempTable object can be drop in to any folder.

16 Configuring Temp Table object Step 1: Manage kits to install easyiotemptable into your controller Step 2: - Choose easyiotemptable from Sedona Palette - Drag & drop the any TemptTable object into your App (in this case EasyIO). The TempTable object can be drop in to any folder. - In this case I have created a folder name TempTab. Drop the Honeywell 20K Thermistor object into the wire sheet.

Step 5: - Right click at the Temp Table object > Actions. There are a few selections - Choose the action Save to Table.

17 Step 3: - Go into the property sheet - Select the table that to write to. Only table 1 to table 8 are for user customizable. Step 4: - If the provided table is not suitable according to the manufacturer, you may edit it. It has 22 lines for every table. Step 5: - Right click at the Temp Table object > Actions. There are a few selections - Choose the action Save to Table. This will write the table values into the selected table number. - For more explanations regarding other actions, please refer to the EasyIO Basic 4 Doc. Section Temp table. Step 6:

18 - To configure other tables repeat step 2 to step 5. Step 7: - Save the sedona application.

TEST PROJECT. Server Side B. Submitted by: WorldSkills International Manuel Schaffner CH. Competition Time: 3 hours. Assessment Browser: Google Chrome

TEST PROJECT. Server Side B. Submitted by: WorldSkills International Manuel Schaffner CH. Competition Time: 3 hours. Assessment Browser: Google Chrome TEST PROJECT Server Side B Submitted by: WorldSkills International Manuel Schaffner CH Competition Time: 3 hours Assessment Browser: Google Chrome WSC2015_TP17_ServerSide_B_EN INTRODUCTION WorldSkills