TORQUE CONVERTER MODELLING FOR ACCELERATION SIMULATION
|
|
- Adam Austin Quinn
- 5 years ago
- Views:
Transcription
1 UNIVERSITY OF PITESTI SCIENTIFIC BULLETIN FACULTY OF MECHANICS AND TECHNOLOGY AUTOMOTIVE series, year XVII, no.1 ( 3 ) TORQUE CONVERTER MODELLING FOR ACCELERATION SIMULATION 1 Ciobotaru, Ticuşor *, 1 Vînturiş, Valentin, Caravan, Alexandru 1 Military Tecnical Academy, Romania, MOND, Romania * cticusor4@yaoo.com KEYWORDS torque converter, modelling, simulation, ydrodynamic transmission ABSTRACT Simulation plays an important role in optimising te performances of te drive line of te off-road veicles. Te models of te engine, torque converter, transmission and running gear are assembled into a large model used for estimation of te veicle acceleration performances. Te paper presents a proposal for modelling of te torque converter dimensionless caracteristics using segmented continuous function taking as variable te inverse of te kinematic ratio. Tere are analysed te variants of te caracteristics offered by te literature as well as te implementation of te torque converter model into te veicle model. 1. INTRODUCTION Te simulation of te acceleration and of te tractive performances of veicles plays an important role in optimization of te driveline and running gear. Te accuracy of te simulation depends dramatically of te models used for engine and transmission. Usually, te steady state caracteristics of te engine are known from te tecnical specifications provided by te supplier in terms of variation of te effective power and torque versus engine speeds or, at least, te values of te maximum power and maximum torque and te speeds of te engine. Contrary, te tecnical specification of te transmission provide te only te ratios of te gearbox and, sometimes, te maximum torque ratio of te torque converter. Te modelling of te driveline imposes te Figure 1 Torque converter components usage of te torque converter caracteristics (te variation of te efficiency, torque ratio and absorbed torque versus slippage) (1). Te effort made for modelling te torque converter caracteristics ave focussed on te usage of cubic Spline for fitting data () and on te estimation of te torque converter caracteristics taking into account te geometry of te pump and turbine rotors (3), (4). Neverteless, te paper dealing wit te veicle performances or wit te analysis of te automatic transmissions include models based on te fitting of te torque caracteristics provided by te supplier (1), (6) or using appropriate tools implemented in specialized software suc as Dymola (7). 11
2 Very often, te designers ave to rougly estimate te longitudinal dynamics of te veicles for different configuration of te driveline based on commercial presentations of te engines and transmissions; suc presentations usually provide only te ratios of te gearbox and te maximum torque ratio of te torque converter.. DIMENSIONLESS CHARACTERISTICS OF TORQUE CONVERTER Te dimensionless caracteristic of te torque converter represents grapically te variation of te efficiency and torque transformation ratio versus te inverse of te speed ratio, defined as: nturbine nturbine =, [,1] ; K = (1) n n Figure presents a typical dimensionless caracteristic of torque converter (Allison TC-418)/ It may observe tat te efficiency curve presents two typical sections: 1. A parabolic sape crossing te origin.. A linear sape followed by an abrupt drop for ig values of te inverse of te speed ratio. impeller K K [ ] impeller Te evolution of te torque transformation ratio sows two sections too, te sapes being quasi-linear. Te two sections mentioned above correspond to te two stages of torque converter work: as torque converter and as ydro-coupler, respectively; te sifting between te two stages is automatic due to te release of te stator (see Figure 1 for te components of te torque converter) for K 1. Te efficiency of te torque converter is defined as te ratio of te output power by te input power: P input η =. () Poutput Using te following definitions: P = M ω ; P = M ω input impeller impeller output output output η [ ] [ ] as well as te relations (1), from te relation () finally results: η = K (3) η K Figure Typical torque converter dimensionless caracteristics 1 η 1 1
3 It is reasonable to model te efficiency curve according to te sapes of te two sections described above. Te following conditions apply in modelling te efficiency curve: A. Te curve must cross te origin: η () =. (4) B. Te maximum of te efficiency occurs for te value of te inverse of te speed ratio noted : 1 η ( ) =η ; (5) 1 d η ( ) d i = 1 =. (6) C. Te maximum value of te torque transformation ratio, noted K may be calculated using te relation (3): K η( ) = lim. (7) Imposing te conditions A and B, tree parameters may be calculated, wile using all te 3 conditions allows calculating 4 parameters. Consequently, it is possible to model te efficiency first section as a polynomial nd order or as polynomial 3 rd order, respectively; bot cases will be analysed furter. For te modelling of te efficiency as a nd order polynomial, te general form of te expression is: η ( ) = A ( ) + B ( ) + C, (8) and from te relation (4) results immediately: C =. Te relations (5) and (6) give te following simultaneous equations: A ( ) + B ( ) =η A ( 1) + B = (9) Solving (9) wit respect to te parameters A and B permits to obtain te final expression of te efficiency: η 1 η ( ) = 1 1 (1) For te second case, considering te modelling as a 3 rd order polynomial, following similar steps of calculation, te final expression results: 3 ( ) ( K 1 1) ( 3 1 K 1) K η = η + η + (11) Te typical values for te torque converters utilized for te ydrodynamic transmissions of eavy veicles are: 13
4 η = ; = Te value of te maximum torque transformation ratio is provided by te torque converter producer and represents a key factor in selecting te appropriate type. For te ydro-coupler section te following linear relation is proposed: η ( ) =.95 (1) Finally, te all sections are described by one of te following functions: η 1 η ( ) = max,.95 ; (13) 1 1 η = η + η + 3 ( ) max ( K 1 1) ( 3 1 K 1) K, (14) Te grapical representation of te actual curve and of te modelled curves is sown in Figure 3; it may observe tat for te normal region of te torque converter ( =...95 ) bot modelled curves provide an acceptable accuracy. η [ ] i, ic, ic [ 1 ] Figure 3 Comparison of actual curve wit modelled curves Furter comparison is needed in order to conclude wat te best solution is. Te torque transformation ratio is calculated based on relation (3) in wic one of te relations (1) or (11) is inserted: K K η ( ) η = = 1 ( i) K η 3 η K K = ( i) (15) (16) 14
5 Te grapical representation of te torque transformation ratio is presented in Figure 4. It results tat te nd order polynomial does not provide an accurate estimation of te maximum torque transformation ratio but te precision of te model is fully acceptable above =.. Contrary, te use of te 3 rd polynomial curve assure te accurate estimation of te maximum torque transformation ratio but te approximation becomes acceptable only above =.5. A detailed analysis of te modelling errors is grapically presented in Figure 5. error [%] 1 5 η [ ] K [ ] Actual curve nd order polynomial 3 rd order polynomial [ ] Figure 4 Torque transformation ratio modelling 1 error [%] 5 K [ ] 5 nd order polynomial 3 rd order polynomial [ ] [ ] Figure 5 Te estimation of te errors of modelling 3. ABSORPTION CHARACTERISTICS OF TORQUE CONVERTER Te torque converter absorbs te torque provided by te engine in variable amount depending on te slip between te impeller and te turbine. Te absorbed torque is calculated using te relation: n M impeller =. (17) Ki ( ) Te typical evolution of te absorption coefficient, noted K, is presented in Figure 6. Usually, te producers of torque converters provide only te value of stall absorption coefficient, noted K. In order to approximate te variation of te absorption coefficient, te K = K : following matematical expression is proposed based on te observation tat ( ) 5 i e K( ) = K + 1. (18) 15
6 Using te relation (18) te grap presented in Figure 6 as resulted. Te grap includes also te relative error due to te modelling. It may be empasised tat te relative errors are below % for inverse of speed ratio up to.4; te relative errors increase up to about 7% for.75, but increase dramatically at te edge of te ydrocoupling section. K [ ] relative error error [%] [ ] Figure 6 Te absorption caracteristic of te torque converter K In order to better evaluate te accuracy of te modelling, te tractive caracteristics of a 14 tonnes veicle ave been calculated. Te powerpak includes a Diesel engine delivering 195 kw at 3 rpm and a planetary gear box wit 6 ratios for forward movement. Te metodology for calculating te tractive coefficient is detailed in (1), and te results are included into te grap presented in Figure 7. γ[ ] Figure 7 Tractive coefficient caracteristics V [kp] From Figure 7 results two main aspects wic are influenced by te errors due to te modelling of te torque caracteristics; te estimated speed for movement on slopes; 16
7 te setting of sifting speeds. Te first aspect is detailed in Figure 8; te resulted error is as ig as.5 kp representting about 5.1%. Tis error is inferior to tose of estimation of te rolling.5 resistance or te driveline.5 efficiency. Consequently, te V [kp] 17.5 modelling of te torque Figure 8 Detail for empasising te error in te estimation of te converter caracteristics does speed for climbing 15º slope not affect significantly te estimation of te speed te veicle can acieve climbing te slope. Te second relevant aspect regarding te influence of te torque converter caracteristics modelling refers to te estimation of te speeds for optimal sifting te ratio of te gear box. Te following sifting sequencing was adopted: 1 st stage wit torque converter (TC) working, ten te lock-up clutc is coupled end te next sift occurs at te speed wic corresponds to te nominal speed of te engine (3 rpm). Te process is detailed in Figure 9 wit empasis of te errors due te modelling of te torque converter modelling. It may conclude tat tese errors do not affect te acceleration process estimation of te veicle. For te stages 3 to 6, te tractive coefficient caracteristics presented in Figure 7 indicates tat is more economic to use only mecanical regime of te ydrodynamic transmission (te lock-up clutc remains coupled). 4. CONCLUSIONS γ [ ].3. γ[ ] ΔV Sifting 1Mec-TC Sifting 1TC-1Mec Actual Based on te modelling Coupled Lock-Up Clutc Te proposed modelling metod proposed use minimal data provided by te torque converter producers: te maximum torque transformation ratio and te stall absorption coefficient. Based on tese inputs, te proposed modelling metods allow te estimation of te efficiency, torque transformation ratio and absorption coefficient caracteristics. ΔV Sifting TC-Mec Figure 9 Sifting speed detailed V [kp] 17
8 Te estimation of te errors due to te modelling of te torque caracteristics as well as of te influences on te tractive coefficient caracteristics as demonstrated tat teir level is fully acceptable. Consequently, te proposed modelling is useful as a first estimation of te following aspects wic represent a real interest in design of powerpack and driveline of eavy veicles: estimation of te matcing of te engine and torque converter; estimation of te tractive coefficient caracteristics wic allow te cecking of te difficult movement situation suc as te motion on slopes; estimation of te acceleration performances of te veicle. Tus, te proposed metods may be applied to obtain first estimation of te veicle s performances witin te decision making process for adopting te appropriate configuration of te powerpack based on commercial data regarding te torque converter. REFERENCES (1) Ciobotaru T., Vînturiş, V., Oană M., Acceleration Process Of Te Tracked Veicle Wit Hydrodynamic Transmission, International Congress on Automotive and Transport Engineering, Brasov, Romania, October 7-9, CONAT 1, Braşov, Paper 15, 1 () Sandu C., Freeman J. S., Analysis of Veicle Subjective Performance and its Impact on Driving Simulation and Powertrain Design, Proc. of 14t Annual Ground Target Modeling and Validation (GTMV) Conf., Aug. 5-8, Hougton, USA, 3 (3) Sinya Kano S., Terasaka Y., Yano K., Prediction of Torque Converter Caracteristics by Fluid Flow Simulation, Komatsu Tecnical Report, VOL. 5, NO.154, 4 (4) Bărglăzan M., Dynamic Identification of a Hydrodynamic Torque Converter, U.P.B. Sci. Bull., Series D, Vol. 7, Iss. 4, 1 ISSN , 1 (5) Stracan, P.J.,Reynaud F.P., Backstriim T.W., Te ydrodynamic modelling of torque converters, N&O JOERNAAL, APRIL, pp.1-8, 199 (6) Louca, L.S., Stein, J.L., Hulbert, G.M., and Rideout, D.G., Generating Proper Dynamic Models for Truck Mobility and Handling, Int. J. of Heavy Veicle Systems, v. 11(3-4), pp. 9-36, 3 (7) Hilding Elmqvist H. and oters, Realtime Simulation of Detailed Veicle and Powertrain Dynamics, SAE Paper , 4 18
OD DVOSTRUKO ZASTAKLJENOG PROZORA DO DVOSTRUKE FASADE INDIKATORI PRENOSA TOPLOTE STACIONARNOG STANJA
OD DVOSTRUKO ZASTAKLJENOG PROZORA DO DVOSTRUKE FASADE INDIKATORI PRENOSA TOPLOTE STACIONARNOG STANJA FROM DOUBLE-GLAZED WINDOW TO DOUBLE-SKIN FACADE STEADY STATE HEAT TRANSFER INDICATORS Gabriel NĂSTASE
More informationCalculation of Theoretical Torque and Displacement in an Internal Gear Pump
TECHNICAL REPORT Calculation of Teoretical Torque and Displacement in an Internal Gear Pump Y. INAGUMA Tis paper describes numerical determination of teoretical torque (ideal torque) and teoretical stroke
More informationOptimization Model of Oil-Volume Marking with Tilted Oil Tank
Open Journal of Optimization 1 1 - ttp://.doi.org/1.36/ojop.1.1 Publised Online December 1 (ttp://www.scirp.org/journal/ojop) Optimization Model of Oil-olume Marking wit Tilted Oil Tank Wei Xie 1 Xiaojing
More informationOverall stability of multi-span portal sheds at right-angles to the portal spans
Overall stability of multi-span portal seds at rigt-angles to te portal spans SCI s Senior Manager for Standards, Carles M King, explains te approac for design of long-span portal seds. 1. Introduction
More informationRegression Models for Saffron Yields in Iran
Regression Models for Saffron ields in Iran Sanaeinejad, S.H., Hosseini, S.N 1 Faculty of Agriculture, Ferdowsi University of Mashhad, Iran sanaei_h@yahoo.co.uk, nasir_nbm@yahoo.com, Abstract: Saffron
More informationANALYSIS OF WORK ROLL THERMAL BEHAVIOR FOR 1450MM HOT STRIP MILL WITH GENETIC ALGORITHM
Journal of Teoretical and Applied Information Tecnology 3 t September 2. Vol. 43 No.2 5-2 JATIT & LLS. All rigts reserved. ANALYSIS OF WORK ROLL THERMAL BEHAVIOR FOR 45MM HOT STRIP MILL WITH GENETIC ALGORITHM
More informationPoint Pollution Sources Dimensioning
Point Pollution Sources Diensioning Georgeta CUCULEANU 1 ABSTRACT In tis paper a etod for deterining te ain pysical caracteristics of te point pollution sources is presented. It can be used to find te
More informationNumerical Simulation of Stresses in Thin-rimmed Spur Gears with Keyway B. Brůžek, E. Leidich
Numerical Simulation of Stresses in Tin-rimmed Spur Gears wit Keyway B. Brůžek, E. Leidic Tis paper contains an investigation of te key on a stress distribution in a tin-rimmed spur gear. A stress analysis
More informationPhysics Engineering PC 1431 Experiment P2 Heat Engine. Section B: Brief Theory (condensed from Serway & Jewett)
Pysics Engineering PC 1431 Experiment P2 Heat Engine Section A: Introduction Te invention of steam engine played a very significant role in te Industrial Revolution from te late 1700s to early 1800s. Te
More information1. Continuing the development and validation of mobile sensors. 3. Identifying and establishing variable rate management field trials
Project Overview The overall goal of this project is to deliver the tools, techniques, and information for spatial data driven variable rate management in commercial vineyards. Identified 2016 Needs: 1.
More informationTo: Professor Roger Bohn & Hyeonsu Kang Subject: Big Data, Assignment April 13th. From: xxxx (anonymized) Date: 4/11/2016
To: Professor Roger Bohn & Hyeonsu Kang Subject: Big Data, Assignment April 13th. From: xxxx (anonymized) Date: 4/11/2016 Data Preparation: 1. Separate trany variable into Manual which takes value of 1
More informationCalculation Methodology of Translucent Construction Elements in Buildings and Other Structures
MATEC Web of Conferences 96, 005 (08) ttps://doi.org/0.05/matecconf/0896005 XXVII R-S-P Seminar 08, Teoretical Foundation of Civil Engineering Calculation Metodology of Translucent Construction Elements
More information16.1 Volume of Prisms and Cylinders
Name Class Date 16.1 Volume of Prisms and Cylinders Essential Question: How do te formulas for te volume of a prism and cylinder relate to area formulas tat you already know? Explore G.11.D Apply te formulas
More informationGas Flow into Rotary Valve Intake and Exhaust Mechanism in Internal Combustion Engine
World Academy of Science, Engineering and Tecnology Vol:7, No:4, 13 Gas Flow into Rotary Valve Intake and Exaust Mecanism in Internal Combustion Engine R. Usubamatov, Z. A. Rasid International Science
More informationCO-ROTATING FULLY INTERMESHING TWIN-SCREW COMPOUNDING: ADVANCEMENTS FOR IMPROVED PERFORMANCE AND PRODUCTIVITY
CO-ROTATING FULLY INTERMESHING TWIN-SCREW COMPOUNDING: ADVANCEMENTS FOR IMPROVED PERFORMANCE AND PRODUCTIVITY Paul G. Andersen, Coperion Corporation, Ramsey, NJ Frank Lecner, Coperion GmbH, Stuttgart,
More informationStudy of microrelief influence on optical output coefficient of GaN-based LED
Study of microrelief influence on optical output coefficient of GaN-based LED Danilina T.I., Cistoyedova I.A. and Popov A.A. Tomsk State University of Control Systems and Radioelectronics, Lenina prospect
More informationANALYSIS OF THE EVOLUTION AND DISTRIBUTION OF MAIZE CULTIVATED AREA AND PRODUCTION IN ROMANIA
ANALYSIS OF THE EVOLUTION AND DISTRIBUTION OF MAIZE CULTIVATED AREA AND PRODUCTION IN ROMANIA Agatha POPESCU University of Agricultural Sciences and Veterinary Medicine, Bucharest, 59 Marasti, District
More informationInstallation the DELTABEAM Frame
Tese installation instructions are intended to be used togeter wit te project s erection metod statement were te instructions may be complemented. If tere are differences between te erection metod statement
More informationStudy of Steam Export Transients in a Combined Cycle Power Plant
Study of Steam Export Transients in a Combined Cycle ower lant Alfonso Junquera Delgado Departamento Mecánico, Empresarios Agrupados c\ Magallanes 3 Madrid 8003 ajd@empre.es Almudena Travesí de los Santos
More informationGround Improvement Using Preloading with Prefabricated Vertical Drains
DISCUSSION of: Ground Improvement Using Preloading wit Prefabricated Vertical Drains Full Reference: Dar, A.S., Siddique, A., Ameen, S.F., (211). Ground Improvement using Pre-loading wit Prefabricated
More informationAnalysing the energy consumption of air handling units by Hungarian and international methods
Analysing te energy consumption of air andling units by Hungarian and international metods László Kajtár 1, Miklós Kassai 2,* 1,2 Budapest University of Tecnology and Economics (BUTE), Budapest, Hungary
More informationAWRI Refrigeration Demand Calculator
AWRI Refrigeration Demand Calculator Resources and expertise are readily available to wine producers to manage efficient refrigeration supply and plant capacity. However, efficient management of winery
More informationAbstract. Introduction
HiPak Modules with SPT + Technology Rated up to 3.6kA M. Rahimo, D. Schneider, R. Schnell, S. Eicher, U. Schlapbach ABB Switzerland Ltd, Semiconductors, Fabrikstrasse 3, CH 5600 Lenzburg, Switzerland email:
More informationDesign of Conical Strainer and Analysis Using FEA
International Journal of Engineering Science Invention (IJESI) ISSN (Online): 2319 6734, ISSN (Print): 2319 6726 Volume 7 Issue 2 Ver. V February 2018 PP. 61-65 Design of Conical Strainer and Analysis
More informationSTUDY AND IMPROVEMENT FOR SLICE SMOOTHNESS IN SLICING MACHINE OF LOTUS ROOT
STUDY AND IMPROVEMENT FOR SLICE SMOOTHNESS IN SLICING MACHINE OF LOTUS ROOT Deyong Yang 1,*, Jianping Hu 1,Enzhu Wei 1, Hengqun Lei 2, Xiangci Kong 2 1 Key Laboratory of Modern Agricultural Equipment and
More informationGrillCam: A Real-time Eating Action Recognition System
GrillCam: A Real-time Eating Action Recognition System Koichi Okamoto and Keiji Yanai The University of Electro-Communications, Tokyo 1-5-1 Chofu, Tokyo 182-8585, JAPAN {okamoto-k@mm.inf.uec.ac.jp,yanai@cs.uec.ac.jp}
More informationUsing Growing Degree Hours Accumulated Thirty Days after Bloom to Help Growers Predict Difficult Fruit Sizing Years
Using Growing Degree Hours Accumulated Thirty Days after Bloom to Help Growers Predict Difficult Fruit Sizing Years G. Lopez 1 and T. DeJong 2 1 Àrea de Tecnologia del Reg, IRTA, Lleida, Spain 2 Department
More informationEffect of SPT Hammer Energy Efficiency in the Bearing Capacity Evaluation in Sands
Proceedings of the 2 nd World Congress on Civil, Structural, and Environmental Engineering (CSEE 17) Barcelona, Spain April 2 4, 2017 Paper No. ICGRE 123 ISSN: 2371-5294 DOI: 10.11159/icgre17.123 Effect
More informationInfluence of the mass flow ratio water-air on the volumetric mass transfer coefficient in a cooling tower
International Journal of CemTec Researc CODEN (UA): IJCRGG, IN: 974-49, IN(Online):455-9555 Vol.11 No.1, pp 167-173, 18 Influence of te mass flow ratio water-air on te volumetric mass transfer coefficient
More informationVibration Damage to Kiwifruits during Road Transportation
International Journal of Agriculture and Food Science Technology. ISSN 2249-3050, Volume 4, Number 5 (2013), pp. 467-474 Research India Publications http://www.ripublication.com/ ijafst.htm Vibration Damage
More informationBuying Filberts On a Sample Basis
E 55 m ^7q Buying Filberts On a Sample Basis Special Report 279 September 1969 Cooperative Extension Service c, 789/0 ite IP") 0, i mi 1910 S R e, `g,,ttsoliktill:torvti EARs srin ITQ, E,6
More informationApplication & Method. doughlab. Torque. 10 min. Time. Dough Rheometer with Variable Temperature & Mixing Energy. Standard Method: AACCI
T he New Standard Application & Method Torque Time 10 min Flour Dough Bread Pasta & Noodles Dough Rheometer with Variable Temperature & Mixing Energy Standard Method: AACCI 54-70.01 (dl) The is a flexible
More information2 2D 2F. 1pc for each 20 m of wire. h (min. 45) h (min. 45) 3AC. see details J, E
TEXTILE AIR DIFFUSERS - - INSTRUCTIONS AIR FOR MOUNTING 1 1D 1F see details A, B, C 2 2D 2F see details A, B, C (min. 32) min. every 0 mm 1pc for eac 20 m of wire min. every 0 mm 1pc for eac 20 m of wire
More informationHCR OF HEAT PUMP ROOM AIR CONDITIONER IN CHINA. Beijing , China
OF HEA PUMP ROOM AIR CONDIIONER IN CHINA Baolong Wang 1, Wenxing Si 1, uan Cen 1 1 Department of Building Sciencesingua University, Beijing 100084, Cina ABSRAC Definition of eating/cooling capacity ratio
More informationBalanced Binary Trees
Balanced Binary Trees 1 Binary searc trees provide O(log N) searc times provided tat te nodes are distributed in a reasonably balanced manner. Unfortunately, tat is not always te case and performing a
More informationLack of Credibility, Inflation Persistence and Disinflation in Colombia
Lack of Credibility, Inflation Persistence and Disinflation in Colombia Second Monetary Policy Workshop, Lima Andrés González G. and Franz Hamann Banco de la República http://www.banrep.gov.co Banco de
More informationTo find the volume of a pyramid and of a cone
- Volumes of Pyramids and Cones Common Core State Standards G-GMD.A. Use volume formulas for... pyramids, cones... to solve problems. G-MG.A. Use geometric sapes, teir measures, and teir properties to
More informationRELATIVE EFFICIENCY OF ESTIMATES BASED ON PERCENTAGES OF MISSINGNESS USING THREE IMPUTATION NUMBERS IN MULTIPLE IMPUTATION ANALYSIS ABSTRACT
RELATIVE EFFICIENCY OF ESTIMATES BASED ON PERCENTAGES OF MISSINGNESS USING THREE IMPUTATION NUMBERS IN MULTIPLE IMPUTATION ANALYSIS Nwakuya, M. T. (Ph.D) Department of Mathematics/Statistics University
More informationPrediction of steel plate deformation due to triangle heating using the inherent strain method
J Mar Sci Tecnol (005) 10:11 16 DOI 10.1007/s00773-005-00-5 Prediction of steel plate deformation due to triangle eating using te inerent strain metod Cang Doo Jang 1, Tae Hoon Kim, Dae Eun Ko 3, Tomas
More informationRussell James Department of Scientific and Industrial Research Taupo-ldairakei, New Zealand
MEASUREMENT OF STEAM-TJATER FLOWS FOR THE TOTAL FLOW TURBIlJE Russell James Department of Scientific and Industrial Researc Taupo-ldairakei, New Zealand Hot water geotermal fields discarge steam-water
More informationAnnex 16. Methodological Tool. Tool to determine project emissions from flaring gases containing methane
CDM Met Panel Twenty-fourt meeting Page 1 Metodological Tool Tool to determine project emissions from flaring es containing metane I. DEFINITIONS, SCOPE, APPLICABILITY AND PARAMETERS Definitions For te
More informationWhat Went Wrong with Export Avocado Physiology during the 1996 Season?
South African Avocado Growers Association Yearbook 1997. 20:88-92 What Went Wrong with Export Avocado Physiology during the 1996 Season? F J Kruger V E Claassens Institute for Tropical and Subtropical
More informationMath Practice Use a Formula
9.4 Volumes of Prisms How can you find te volume of a prism? ACTIVITY: Pearls in a Treasure Cest Work wit a partner. A treasure cest is filled wit valuable pearls. Eac pearl is about centimeter in diameter
More informationThe aim of the thesis is to determine the economic efficiency of production factors utilization in S.C. AGROINDUSTRIALA BUCIUM S.A.
The aim of the thesis is to determine the economic efficiency of production factors utilization in S.C. AGROINDUSTRIALA BUCIUM S.A. The research objectives are: to study the history and importance of grape
More informationFixation effects: do they exist in design problem solving?
Environment and Planning B: Planning and Design, 1993, volume 20, pages 333-345 Fixation effects: do tey exist in design problem solving? A T Purcell, P Williams, J S Gero, B Colbron Department of Arcitectural
More informationCOMPARISON OF CORE AND PEEL SAMPLING METHODS FOR DRY MATTER MEASUREMENT IN HASS AVOCADO FRUIT
New Zealand Avocado Growers' Association Annual Research Report 2004. 4:36 46. COMPARISON OF CORE AND PEEL SAMPLING METHODS FOR DRY MATTER MEASUREMENT IN HASS AVOCADO FRUIT J. MANDEMAKER H. A. PAK T. A.
More informationINFLUENCE OF THIN JUICE ph MANAGEMENT ON THICK JUICE COLOR IN A FACTORY UTILIZING WEAK CATION THIN JUICE SOFTENING
INFLUENCE OF THIN JUICE MANAGEMENT ON THICK JUICE COLOR IN A FACTORY UTILIZING WEAK CATION THIN JUICE SOFTENING Introduction: Christopher D. Rhoten The Amalgamated Sugar Co., LLC 5 South 5 West, Paul,
More informationRevision Topic 12: Area and Volume Area of simple shapes
Revision Topic : Area and Volume Area of simple sapes You need to learn ALL of te following area formulae: Rectangle Triangle W L b Area = lengt widt Area = base eigt = ½ b Parallelogram Trapezium a b
More informationMastering Measurements
Food Explorations Lab I: Mastering Measurements STUDENT LAB INVESTIGATIONS Name: Lab Overview During this investigation, you will be asked to measure substances using household measurement tools and scientific
More informationPerformance Analysis of Impeller and Rubber Roll Husker Using Different. Varieties of Rice
Performance Analysis of Impeller and Rubber Roll Husker Using Different Varieties of Rice D. Shitanda 1, Y. Nishiyama 2, S. Koide 2 1 Faculty of Agriculture, Jomo Kenyatta University of Agriculture and
More informationA New Approach for Smoothing Soil Grain Size Curve Determined by Hydrometer
International Journal of Geosciences, 2013, 4, 1285-1291 Published Online November 2013 (http://www.scirp.org/journal/ijg) http://dx.doi.org/10.4236/ijg.2013.49123 A New Approach for Smoothing Soil Grain
More informationEnvironmental Monitoring for Optimized Production in Wineries
Environmental Monitoring for Optimized Production in Wineries Mounzer SALEH Applications Engineer Agenda The Winemaking Process What Makes a great a Wine? Main challenges and constraints Using Technology
More informationGluten Index. Application & Method. Measure Gluten Quantity and Quality
Gluten Index Application & Method Wheat & Flour Dough Bread Pasta Measure Gluten Quantity and Quality GI The World Standard Gluten Tes t Gluten Index: AACC/No. 38-12.02 ICC/No. 155&158 Wet Gluten Content:
More information青藜苑教育 Example : Find te area of te following trapezium. 7cm 4.5cm cm To find te area, you add te parallel sides 7
青藜苑教育 www.tetopedu.com 00-6895997 3095457 Area of simple sapes Revision Topic : Area and Volume You need to learn ALL of te following area formulae: Rectangle Triangle W L Area = lengt widt Area = b base
More informationThe Hungarian simulation model of wine sector and wine market
1 The Hungarian simulation model of wine sector and wine market Szenteleki, K. 1, Botos, E. P. 2, Szabó, A. 2, Ladanyi, M. 1 1 Corvinus University of Budapest, Faculty of Horticultural Science, Department
More informationRecent Developments in Rheological Instruments
22 nd Annual IAOM Mideast & Africa District Conference & Expo 2-5 October 2011 Dead Sea, Jordan Recent Developments in Rheological Instruments Dipl.- Ing.(FH) Markus Löns, Brabender GmbH & Co.KG Duisburg
More informationBrabender GmbH & Co. KG The leading supplier for food quality testing instruments
Brabender GmbH & Co. KG The leading supplier for food quality testing instruments precise flexible easy time-saving space-saving Brabender Farinograph -TS with Aqua-Inject Our new, small Farino Brabender
More information2. The differential pressure across control valves must not vary too much
2. Te differential pressre across control valves mst not vary too mc Common roblems roblems, typical indicating tat condition nmber two is not met: - Continos oscillation of room temperatre. - Room temperatres
More informationDescription of Danish Practices in Retail Trade Statistics.
Description of Danis Practices in Retail Trade Statistics. 1. Statistical units and reporting units Units and population Te enterprises in te Retail Trade Index are all legal units. In te Central Business
More informationInnovations for a better world. Ingredient Handling For bakeries and other food processing facilities
Innovations for a better world. Ingredient Handling For bakeries and other food processing facilities Ingredient Handling For bakeries and other food processing facilities From grain to bread Ingredient
More informationRelationship between Mineral Nutrition and Postharvest Fruit Disorders of 'Fuerte' Avocados
Proc. of Second World Avocado Congress 1992 pp. 395-402 Relationship between Mineral Nutrition and Postharvest Fruit Disorders of 'Fuerte' Avocados S.F. du Plessis and T.J. Koen Citrus and Subtropical
More informationDetecting Melamine Adulteration in Milk Powder
Detecting Melamine Adulteration in Milk Powder Introduction Food adulteration is at the top of the list when it comes to food safety concerns, especially following recent incidents, such as the 2008 Chinese
More informationGE Active Containment Sump Strainer for PWR Applications
GE Active Containment Sump Strainer for PWR Applications IEEE/NPEC/SC2 MEETING 05-1 Ed Mohtashemi Principal Engineer APRIL 20-21, 2005 San Diego, CA. Agenda Summary/Background Active Strainer Overview
More informationEFFECT OF TOMATO GENETIC VARIATION ON LYE PEELING EFFICACY TOMATO SOLUTIONS JIM AND ADAM DICK SUMMARY
EFFECT OF TOMATO GENETIC VARIATION ON LYE PEELING EFFICACY TOMATO SOLUTIONS JIM AND ADAM DICK 2013 SUMMARY Several breeding lines and hybrids were peeled in an 18% lye solution using an exposure time of
More informationFOOD FOR THOUGHT Topical Insights from our Subject Matter Experts LEVERAGING AGITATING RETORT PROCESSING TO OPTIMIZE PRODUCT QUALITY
FOOD FOR THOUGHT Topical Insights from our Subject Matter Experts LEVERAGING AGITATING RETORT PROCESSING TO OPTIMIZE PRODUCT QUALITY The NFL White Paper Series Volume 5, August 2012 Introduction Beyond
More informationMBA 503 Final Project Guidelines and Rubric
MBA 503 Final Project Guidelines and Rubric Overview There are two summative assessments for this course. For your first assessment, you will be objectively assessed by your completion of a series of MyAccountingLab
More informationActivity 10. Coffee Break. Introduction. Equipment Required. Collecting the Data
. Activity 10 Coffee Break Economists often use math to analyze growth trends for a company. Based on past performance, a mathematical equation or formula can sometimes be developed to help make predictions
More informationMath GPS. 2. Art projects include structures made with straws this week.
Number of Plants Mat GPS. List te measurements in order from greatest to least., inces,5 feet mile 75 yards Greatest. Art projects include structures made wit straws tis week. Number of Projects, p Total
More informationWhat s New? AlveoLab, SRC-CHOPIN, Mixolab 2. CHOPIN Technologies Geoffroy d Humières
What s New? AlveoLab, SRC-CHOPIN, Mixolab 2 CHOPIN Technologies Geoffroy d Humières Alveolab Very easy set-up! Installation requirements: a computer (USB) bench space 220V No water cooling Automated water
More informationBaker Perkins Inc 3223 Kraft Ave SE Grand Rapids, MI USA. Baker Perkins Ltd Manor Drive Paston Parkway Peterborough PE4 7AP United Kingdom
Baker Perkins Ltd Manor Drive Paston Parkway Peterborough PE4 7AP United Kingdom T: +44 1733 283000 F: +44 1733 283004 E: bpltd@bakerperkinsgroup.com I: www.bakerperkinsgroup.com Baker Perkins Inc 3223
More informationResearch regarding the setting up of the Processing Directions of Peach New Cultivars and Hybrids
Roumanian Biotecnological Letters Vol. 13, No. 5, 2008, pp. 3955 3961 Copyrigt 2008 Bucarest University Printed in Romania. All rigts reserved Roumanian Society of Biological Sciences ORIGINAL PAPER Researc
More information4.2 Using Similar Shapes
LESSON 4.2 Using Similar Sapes Proportionalit 7.5. Generalize te critical attributes of similarit, including ratios witin and between similar sapes. ESSENTIL QUESTION How can ou use similar sapes to find
More informationThe Design and Marketing of a 300 Kilogram Coffee Roaster
The Design and Marketing of a 300 Kilogram Coffee Roaster Marketing: Karolyn Bolay Business: Kelsey Hubbard Team Leader/Engineer: Brittany Looke Engineer: Mark Marshall Engineer: Nathan Moyer US Roaster
More informationStructural optimal design of grape rain shed
Available online at www.sciencedirect.com Procedia Engineering 31 (2012) 751 755 International Conference on Advances in Computational Modeling and Simulation Structural optimal design of grape rain shed
More informationDough Master. Member of the
Dough Master Dividing Rounding Proofing Moulding Member of the Dividing Rounding Proofing Moulding DOUGH MASTER: The master of dough dividing By controlling the stress in the dough, various dough consistencies
More informationChef And Team Derby Green Ooty
Chef And Team Derby Green Ooty Sr. No. Name Token No./ ID 1. Chef Niraj Kumar Team Kitchen Awards 2017 Name of the Project :To reduce food cost and food wastage without affecting the customer dining exper
More information234 The National Strategies Secondary Mathematics exemplification: Y7
234 Te National Strategies Secondary Matematics exemplification: Y7 Pupils sould learn to: Deduce and use formulae to calculate lengts, perimeters, areas and volumes in 2-D and 3-D sapes As outcomes, Year
More informationTemperature effect on pollen germination/tube growth in apple pistils
FINAL PROJECT REPORT Project Title: Temperature effect on pollen germination/tube growth in apple pistils PI: Dr. Keith Yoder Co-PI(): Dr. Rongcai Yuan Organization: Va. Tech Organization: Va. Tech Telephone/email:
More informationProduct Description. Characteristic features. Further highlights. General Product Description Roller Rail Systems
5 Product Description Rexroth Roller Rail Systems were specially developed for use in machine tools, industrial robots and general machine construction applications calling for compact, rolling-element
More informationA Research on Traditionally Avilable Sugarcane Crushers
International Journal of Engineering and Manufacturing Science. ISSN 2249-3115 Volume 7, Number 1 (2017), pp. 77-85 Research Foundation http://www.rfgindia.com A Research on Traditionally Avilable Sugarcane
More informationAcidity and ph Analysis
Broad supplier of analytical instruments for the dairy industry. Acidity and Analysis for Milk and Cheese HI 84429 Titratable Acids mini Titrator and Meter Perform a Complete Analysis with One Compact
More informationBag-In-Box Package Testing for Beverage Compatibility
Bag-In-Box Package Testing for Beverage Compatibility Based on Proven Plastic Bottle & Closure Test Methods Standard & Analytical Tests Sensory evaluation is subjective but it is the final word or approval.
More informationAnalysis of Things (AoT)
Analysis of Things (AoT) Big Data & Machine Learning Applied to Brent Crude Executive Summary Data Selecting & Visualising Data We select historical, monthly, fundamental data We check for correlations
More informationOak and Barrel Alternatives: Art and Science
Oak and Barrel Alternatives: Art and Science 7 th Annual VinCo Conference January 16 to 19 Jeff McCord, Ph.D. VP Research and Technical Sales www.stavin.com Outline 1. Sourcing Oak and a Tour of StaVin.
More informationEvaluating a harvest control rule of the NEA cod considering capelin
The 17th Russian Norwegian Symposium Long term sustainable management of living marine resources in the Northern Seas Bergen, March 2016 Evaluating a harvest control rule of the NEA cod considering capelin
More informationD Lemmer and FJ Kruger
D Lemmer and FJ Kruger Lowveld Postharvest Services, PO Box 4001, Nelspruit 1200, SOUTH AFRICA E-mail: fjkruger58@gmail.com ABSTRACT This project aims to develop suitable storage and ripening regimes for
More informationPINEAPPLE LEAF FIBRE EXTRACTIONS: COMPARISON BETWEEN PALF M1 AND HAND SCRAPPING
PINEAPPLE LEAF FIBRE EXTRACTIONS: COMPARISON BETWEEN PALF M1 AND HAND SCRAPPING Yusri Yusof, Siti Asia Yahya and Anbia Adam Universiti Tun Hussein Onn Malaysia (UTHM), Johor, Malaysia E-Mail: yusri@uthm.edu.my
More informationBIOLOGICALLY INSPIRED MULTIFUNCTIONAL COMPOSITE PANEL WITH INTEGRATED CIRCULATORY SYSTEM FOR THERMAL CONTROL
BIOLOGICALLY INSPIRED MULTIFUNCTIONAL COMPOSITE PANEL WITH INTEGRATED CIRCULATORY SYSTEM FOR THERMAL CONTROL A. D. Williams, M. E. Lyall, L. E. Underwood, and B. J. Arritt Air Force Researc Laboratory,
More informationRISK MANAGEMENT OF BEER FERMENTATION DIACETYL CONTROL
Buletin USAMV-CN, 62/2006 (303-307) ISSN 1454 2382 RISK MANAGEMENT OF BEER FERMENTATION DIACETYL CONTROL Mudura Elena, SevastiŃa Muste, Maria Tofană, Crina Mureşan elenamudura@yahoo.com University of Agricultural
More informationThermal Hydraulic Analysis of 49-2 Swimming Pool Reactor with a. Passive Siphon Breaker
Thermal Hydraulic Analysis of 49-2 Swimming Pool Reactor with a Passive Siphon Breaker Zhiting Yue 1, Songtao Ji 1 1) China Institute of Atomic Energy(CIAE), Beijing 102413, China Corresponding author:
More informationPredicting Wine Quality
March 8, 2016 Ilker Karakasoglu Predicting Wine Quality Problem description: You have been retained as a statistical consultant for a wine co-operative, and have been asked to analyze these data. Each
More informationFair Trade and Free Entry: Can a Disequilibrium Market Serve as a Development Tool? Online Appendix September 2014
Fair Trade and Free Entry: Can a Disequilibrium Market Serve as a Development Tool? 1. Data Construction Online Appendix September 2014 The data consist of the Association s records on all coffee acquisitions
More informationRelation between Grape Wine Quality and Related Physicochemical Indexes
Research Journal of Applied Sciences, Engineering and Technology 5(4): 557-5577, 013 ISSN: 040-7459; e-issn: 040-7467 Maxwell Scientific Organization, 013 Submitted: October 1, 01 Accepted: December 03,
More informationThe Premium Benefits of Steam Infusion UHT Treatment
EDITORIAL October 2012 The Premium Benefits of Steam Infusion UHT Treatment UHT, or Ultra High Temperature, treatment uses high temperature for a short time to kill micro-organisms in a food or beverage
More informationAppendix A. Table A.1: Logit Estimates for Elasticities
Estimates from historical sales data Appendix A Table A.1. reports the estimates from the discrete choice model for the historical sales data. Table A.1: Logit Estimates for Elasticities Dependent Variable:
More informationThe R&D-patent relationship: An industry perspective
Université Libre de Bruxelles (ULB) Solvay Brussels School of Economics and Management (SBS-EM) European Center for Advanced Research in Economics and Statistics (ECARES) The R&D-patent relationship: An
More information(A report prepared for Milk SA)
South African Milk Processors Organisation The voluntary organisation of milk processors for the promotion of the development of the secondary dairy industry to the benefit of the dairy industry, the consumer
More informationApplication Note CL0311. Introduction
Automation of AOAC 970.16 Bitterness of Malt Beverages and AOAC 976.08 Color of Beer through Unique Software Control of Common Laboratory Instruments with Real-Time Decision Making and Analysis Application
More informationBrewhouse technology
Brewhouse technology For Beer with Character Brewhouse technology The best quality wort for the best quality beer The brewhouse is the heart of every brewery and therefore crucial to the quality of the
More informationParameters Effecting on Head Brown Rice Recovery and Energy Consumption of Rubber Roll and Stone Disk Dehusking
Journal of Agricultural Science and Technology B 5 (2015) 383-388 doi: 10.17265/2161-6264/2015.06.003 D DAVID PUBLISHING Parameters Effecting on Head Brown Rice Recovery and Energy Consumption of Rubber
More information