Hyprez Felt Bobs Hyprez Mounted Wool Felt Bobs Mandrel Mounted Hyprez Felt Bobs are made of pure wool in a broad variety of sizes, shapes, and degrees of hardness - for any finishing requirement. The mandrels are exactly centered for true-running operation. In ordering, specify part number and hardness desired. STANDARD SHAPES in Medium, Hard Standard Shapes Part No. Width Depth Shank 503.MS.1A 1/2" 1" 1/8" 503.MS.1C 1" 2 1/4" 503.MS.2A 1/2" 1/2" 1/8" 503.MS.3C 3/8" 1/2" 1/8" 503.MS.3F 1/2" 1" 1/8" 503.MS.4B 1/2" 3/4" 1/8" 503.MS.5A 1/2" 3/4" 1/8" 503.MS.6A 1/2" 1/2 1/8" CYLINDERS - Medium, Hard, Rock Hard Cylinder Shape Part No. Width Depth Shank 503.CB.2 1/4" 1/4" 1/8" 503.CB.2A 3/8" 3/8" 1/8" 503.CB.3 3/8" 1/2" 1/8" 503.CB.4 1/2 1/2" 1/8" 503.CB.5 1/2" 3/4" 1/8" 503.CB.6 1/2" 1" 1/8" 503.CB.7 3/4" 3/4" 1/8" 503.CB.10 1" 1" 1/4" 1 Ordering Example: Prefix P/N Hardness 503. MS.1A. (M)* * M = Medium H = Hard RH = Rock Hard Felt Reciprocating Bob 503.MS.1 503.MS.2 503.MS.3 503.MS.4 503.MS.5 503.MS.6 Cylinder LSB.2.MED Hyprez Felt Bob Assortment #40 This assortment includes the following: 12 cylinders - 2 each of 4 sizes in each hardness; Medium, Hard, Rock Hard; all 1/8" mandrel Sizes: CB-2 1/4" x 1/4", CB-3 3/8" x 1/2", CB-4 1/2" x 1/2", CB-7 3/4" x 3/4" 8 standard shapes - 1 each of 4 sizes in Medium & Hard all 1/8" mandrel, 1/2" diameter - MS1A 1/2" x 1", MS2A 1/2" x 1/2", MS3F 1/2" x 1", MS6A 1/2" x 1/2" 6 Finger Pads - 1" x 3" - 1/8" thick *Felt Finger Pads 1" x 3" approximately 1/8" thick 10-1 Toll Free: 1-800-99-ENGIS Burlington, (1-800-993-6447) E-mail: info@engis.com Telephone: 905-632-3016
Hyprez Wood Bobs Hyprez Wood Bobs Wood Bobs Hyprez Bobs are available in Hydulignum, a highly-compressed hard wood laminated in layers with plastic. The grain direction is perpendicular to the circumference to assure uniform lapping surface and efficient charging. They are recommended for fast stock removal or where exact contour or shaping is required - use 15 micron or coarser Hyprez Diamond Compounds for these applications. Hyprez Bobs are also available in selected soft pine for pre-finish before final felt polishing. Hyprez Diamond Compounds grade of 15 micron or finer are recommended for use with these bobs. 1 1/8" Mandrel Mounted Cones and Cylinders HYD-1/SFT-1 HYD-2/SFT-2 HYD-3/SFT-3 HYD-4/SFT-4 HYD-5/SFT-5 HYD-6/SFT-6 Hydulignum Pine (Hard Wood) (Soft Wood) Size Shape 501.HYD.1 501.SFT.1 3/4" x 1-3/16" Cone 501.HYD.2 501.SFT.2 7/16" x 1-3/16" Cone 501.HYD.3 501.SFT.3 9/32" x 5/8" Cone 501.HYD.4 501.SFT.4 3/4" x 1-1/8" Cylinder 501.HYD.5 501.SFT.5 7/16" x 3/4" Cylinder 501.HYD.6 501.SFT.6 9/32" x 1/2" Cylinder 501.HYD.1/SFT.1 501.HYD.4/SFT.4 501.HYD.2/SFT.2 501.HYD.5/SFT.5 501.HYD.3/SFT.3 501.HYD.6/SFT.6 Hyprez Wood Bobs 10-2 Toll Free: 1-800-99-ENGIS Burlington, (1-800-993-6447) E-mail: info@engis.com Telephone: 905-632-3016
Hyprez Lapping Sticks Hyprez Lapping Sticks Hyprez Hard Wood Lapping Sticks Hyprez laminated 6" lapping sticks are designed especially for fast stock removal using Hyprez Diamond Compounds. Made of highly compressed wood layers with alternating grain direction, saturated and bonded with synthetic resin, they are dense, easily formed, shape retaining, and perform like a cast iron lap of top quality such as Meehanite. The many shapes available include square and rectangular with 45 bevels or round with conical points. Hyprez Soft Wood Lapping Sticks Designed for immediate and final polishing. Square and rectangular shapes are beveled to 45 ; round sticks are pointed. All shapes are 6" long. Wood Selection All One Size and Wood Hardness Contained in Each Package Hard Soft In Each Pack Size Shape 502.D 502.SD 20 1/8" x 1/8" x 6" Square 502.E 502.SE 20 1/8" x 1/4" x 6" Rectangle 502.F 502.SF 20 1/4" x 1/4" x 6" Square 502.G 502.SG 20 3/16" x 3/16" x 6" Square 502.H 502.SH 20 5/16" x 1/2" x 6" Rectangle 502.I 502.SI 20 5/16" x 3/4" x 6" Rectangle 502.J 502.SJ 20 1/8" x 6" Round 502.K 502.SK 20 3/16" x 6" Round 502.L 502.SL 20 1/4" x 6" Round 20 Special Group Combinations of Lapping Sticks Wood Selection All One Size and Wood Hardness Contained in Each Package Hard Soft Quantity Size Shape 6 1/8" x 1/8" x 6" Square 6 1/8" x 1/4" x 6" Rectangle Group Group 4 1/4" x 1/4" x 6" Square 502.A 502.SA 4 3/16" x 3/16" x 6" Square 2 5/16" x 1/2" x 6" Rectangle 2 5/16" x 3/4" x 6" Rectangle Group Group 12 1/8" x 1/8" x 6" Square 502.B 502.SB 12 1/8" x 1/4" x 6" Rectangle 12 1/4" x 1/4" x 6 Square Group Group 5 5/16" x 1/2" x 6" Rectangle 502.C 502.SC 5 5/16" x 3/4" 6" Rectangle Group Group 10 1/8" x 6" Round 502.M 502.SM 8 3/16" x 6" Round 4 1/4" x 6" Round 10-3 Toll Free: 1-800-99-ENGIS Burlington, (1-800-993-6447) E-mail: info@engis.com Telephone: 905-632-3016
Wood Lapping Ribs Dimension (mm) Hard wood Soft wood 3,0 x 3,0 WLR-3030/H WLR-3030/S 4,5 x 4,5 WLR-4545/H WLR-4545/S 6,5 x 6,5 WLR-6565/H WLR-6565/S 3,0 x 7,0 WLR-3070/H WLR-3070/S 8,0 x 12,5 WLR-80125/H WLR-80125/S 8,0 x 19,0 WLR-80190/H WLR-80190/S Ø 3,0 WLR-30/H WLR-30/S Ø 4,5 WLR-45/H WLR-45/S Ø 6,5 WLR-65/H WLR-65/S (total length 150 mm) Assortment of 1 each of the above Hard Wood Ribs (9 pcs) Assortment of 1 each of the above Soft Wood Ribs (9 pcs) WLR-H WLR-S Plexi-glass Lapping Ribs Dimension Ø x T (mm) 3,0 x 3,0 PLR-3030 4,0 x 4,0 PLR-4040 6,0 x 6,0 PLR-6060 3,0 x 6,0 PLR-3060 8,0 x 13,0 PLR-80130 8,0 x 19,0 PLR-80190 Ø 3,0 Ø 4,0 Ø 6,0 PLR-30 PLR-40 PLR-60 (total length 150 mm) Assortment of 1 each of the above Plexi glas Ribs (9 pcs) PLR-SET 50 www.engisca.com www.diprofil.se
Felt Polishing Ribs Dimension (mm) Hard felt Soft felt 6,0 x 6,0 FPR-6060/H FPR-6060/S 10,0 x 10,0 FPR-1010/H FPR-1010/S 12,0 x 12,0 FPR-1212/H FPR-1212/S Assortment of 3 each of the above Felt Polishing Ribs (18 pcs) FPR-SET (total length 150 mm) Felt Polishing Sticks Dimension (mm) Hard felt Soft felt 6,0 x 6,0 x 37,0 FPS-6060/H FPS-6060/S 10,0 x 10,0 x 45,0 FPS-1010/H FPS-1010/S 12,0 x 12,0 x 45,0 FPS-1212/H FPS-1212/S Assortment of 1 each of the above Felt Polishing Sticks (6 pcs) FPS-SET (shank Ø 3,2 mm) www.engisca.com www.diprofil.se 51
Hyprez Polishing Brushes Hyprez Polishing Brushes These top quality brushes will hold diamond compounds longer, provide more cutting action, at lower production costs. They are made of natural stiff bristle for long life; available in three shapes with long shank for straight hand pieces and in three shapes with short shank for contra-angle hand pieces. 12 End Shape Cup Shape Wheel Shape Brush Shank No. Diameter Shape Use these brushes with any Straight Hand Piece 504.7HL 1/8" End Shape Plastic Ferrule 504.7HS 3/32" End Shape Metal Ferrule 504.2HL 1/8" Wheel Shape Firm, natural bristles hold shape 504.2HS 3/32" Wheel Shape Firm, natural bristles hold shape 504.12HL 1/8" Cup Shape More bristles for longer life 504.12HS 3/32" Cup Shape More bristles for longer life Use these brushes with Contra-Angle Hand Piece only - for hard-to-get-at places 504.73RC 3/32" End Shape 504.23RC 3/32" Wheel Shape 504.123RC 3/32" Cup Shape 10-4 Toll Free: 1-800-99-ENGIS Burlington, (1-800-993-6447) E-mail: info@engis.com Telephone: 905-632-3016
Di-Profiler Hones and Laps Mounted on Shoes, Discs, Shafts These accurately made small tools are designed for use with the Di-Profiler especially for those hard-to-get-at places. Laps impregnated with Hyprez Diamond Compounds can be used for all operations from fast stock removal to final finishing. (For complete Hyprez Diamond Compound applications and grades see Section 9) 1 Shape HONES LAPS Part No. Material Part No. Material Rectangle LKG-1A3 Crystolon LKE-1A Cast Iron LKG-2A3 India LKE-2A Copper LKG-3A1 Washita LKE-3A Hard Lead LKG-5A2 Abrasive Rubber LKE-4A Fiber LKE-5A Balsa Wood LKE-6A Cork LKE-7A Felt Angle Cut LKH-1A3 Crystolon LKF-1A Cast Iron LKH-2A3 India LKF-2A Copper LKH-3A1 Washita LKF-4A Fiber Disc LAB-1A3 CrystolonLAA-1A Cast Iron LAB-2A3 India LAA-2A Copper LAB-3A1 Washita LAA-3A Hard Lead LAB-5A2 Abrasive Rubber LAA-4A Fiber LAA-5A Balsa Wood LAA-6A Cork LAA-7A Felt Rectangle Shaft LLC-1A3 Crystolon LLB-1A Cast Iron Mounted LLC-2A3 India LLB-2A Copper LLC-3A1 Washita LLB-3A Hard Lead LLC-5A2 Abrasive Rubber LLB-4A Fiber LLB-5A Balsa Wood LLB-6A Cork LLB-7A Felt TYPICAL COMBINATIONS (For use of extension arms with disc and shoe holders) 1 FBA-2 FVA FBA-2 FVA FBA-2 FBA-2 SEV SEV FMM-D-D 10-6 Toll Free: 1-800-99-ENGIS Burlington, (1-800-993-6447) E-mail: info@engis.com Telephone: 905-632-3016
Lapping Rings Rotating tools for use together with Diamond Compound in various lapping and polishing applications. Material Type Ø D (mm) Ø d (mm) Height (mm) Quantity Plastic 8 9 6 6 10 pcs LRP-8 Plastic 12 13 10 8 10 pcs LRP-12 Plastic 20 21 17 14 10 pcs LRP-20 Brass 8 8 6 6 10 pcs LRB-8 Brass 12 12 10 8 10 pcs LRB-12 Brass 20 20 17 14 10 pcs LRB-20 Plastic Brass Mandrels Mandrels for use together with Lapping rings. Snaps on and keeps rings flat against the work surface. For use with: Ø D (mm) Shank Ø d (mm) H (mm) A (mm) Type 8 rings 8 3,0 6 5 M-8/3 Type 12 rings 12 3,0 7,5 8 M-12/3 Type 20 rings 20 3,0 7,5 8 M-20/3 Type 20 rings 20 6,0 11 9 M-20/6 www.engisca.com www.diprofil.se 49
Lapping Bits Lapping tools for use together with Diamond Compound and the Diprofil Polishing/Filing machines. Shape Material Size X (mm) Quantity Square Plastic 4 50 LBP-4S Square Plastic 6 50 LBP-6S Square Plastic 8 50 LBP-8S Square Brass 4 25 LBB-4S Square Brass 6 25 LBB-6S Square Brass 8 25 LBB-8S Round Plastic 4 50 LBP-4R Round Plastic 6 50 LBP-6R Round Plastic 8 50 LBP-8R Round Brass 4 25 LBB-4R Round Brass 6 25 LBB-6R Round Brass 8 25 LBB-8R Triangular Plastic 7 50 LBP-4T Triangular Plastic 10 50 LBP-6T Triangular Plastic 14 50 LBP-8T Triangular Brass 7 25 LBB-4T Triangular Brass 10 25 LBB-6T Triangular Brass 14 25 LBB-8T Ball-rods For use together with Lapping bits. For use with: Length (mm) Straight Size 4 & 7 bits 140 BRM-4S Straight Size 6 & 10 bits 140 BRM-6S Straight Size 8 & 14 bits 140 BRM-8S Angle 120 Size 4 & 7 bits 140 BRM-4A Angle 120 Size 6 & 10 bits 140 BRM-6A Angle 120 Size 8 & 14 bits 140 BRM-8A 52 www.engisca.com www.diprofil.se