PRODUCT SELECTION GUIDE REPIPET DISPENSERS Products Repipet Dispenser Reagent Volume (ml) Reservoir Type Accuracy Reproducibility Composition Compatibility Autoclavable Page 0.5, 1, 5, 10 950 ml Round, 1000 ml 1% 0.10% Glass Barrel All reagents except Yes 23 20, 50, 100 square, amber bottles. Also Glass Plunger Hydrofluoric Acid cap/washer set for your bottle TEFLON Tubing AL models not for Organic Solvents Mini Repipet 0.5, 1, 2.5, 5, 10, 4 oz (120 ml) round amber 1% 0.10% Glass Barrel All reagents except Yes 24 glass bottle Glass Plunger Hydroflouric Acid TEFLON Tubing Ground Glass 0.5, 1, 5, 10, 20 125 ml Erlenmeyer Flask, 1% 0.10% Glass Barrel, Glass All reagents except Yes 25 50, 100 100 ml Conical Vessel, Plunger, TEFLON Hydroflouric Acid 500/1000/2000 ml bottles or without Tubing, Gr modela container Glass Inlet Tubing Repipet II 5, 10, 20 500, 1250 ml bottles, also cap/washer 1.50% 0.20% Glass Barrel All reagents except No 26 set for your bottle. Glass Plunger Hydroflouric Acid TEFLON Tubing & Organic Solvent HALAR Sleeve Repipet Jr Adjust. Volume Repipet Jr. Calibratable Fixed Volume 2, 5, 10 960 ml plastic bottle 2% 0.50% Polyethylene Non-corrosive No 27 Polypropylene reagents EPR 0.1, 0.2, 0.5, 4,8, 16 oz amber glass and 2% 0.50% Polyethylene Non-corrosive No 27 0.7, 0.9, 1, 1.5, 2, plastic bottles Polypropylene reagents 2.5, 3, 4, 5, 10 EPR REPIPET DILUTORS Products Reservoir Min. Ratio Diluent to Dilutor Volume (ml) Reagent Type Aspirated Volumes Dilutor Aspirator Composition Compatibility Autoclavable Page Single Stroke Repipet Dilutor 1000 ml square, amber 1:1, 13:1, 2.3:1 1, 10 0.5, 0.75 Glass Barrel All reagents except Yes 28 Also cap/washer 4.3 Glass Plunger Hydroflouric Acid set for your bottle TEFLON tubing U models not for Organic solvents
R E P I P E T Trust. It s earned one customer at a time. One year at a time. Labs, world-wide, trust our REPIPET dispensers for their reliable, all-purpose performance. So flexible and durable, Pyrex glass and Teflon fluorocarbon make the Standard REPIPET safe for all liquids except hydrofluoric acid. Dependability? Proven 1% accuracy, 0.1% full scale reproducibility. Acids? Solvents? No Problem! Repipet Dispensers for Universal REPIPET Dispensers 3001/2AU 0.5 3001AU 1.0 3005AU 5.0 3010AU 10.0 3020AU 20.0 3050AU 50.0 3100AU 100.0 for Low Silhouette REPIPET Dispensers (Glass) 3001/2AL 0.5 3001AL 1.0 3005AL 5.0 3010AL 10.0 3020AL 20.0 3050AL 50.0 for Standard REPIPET Dispensers 3001/2A 0.5 3001A 1.0 3005A 5.0 3010A 10.0 3020A 20.0 3050A 50.0 Dispenser components are fully autoclavable. Full range adjustability, 1% accuracy and 0.1% reproducibility at full scale, guaranteed. Includes a magnifying indicator for easy-reading accuracy. Pyrex and Teflon fluorocarbon construction for safe use with all liquids except hydrofluoric solutions. Models ending in A and AU include both magnifying indicator and metal indicator Universal REPIPET Dispensers Dispense from any screw-cap container with an inner diameter opening greater than 19 mm or any container with a 24/40 or 29/42 standard taper by adding an adapter for a ground-glass joint. Supplied with 3-cap and washer sets to fit your container. 45 mm cap & washer set optional. #CV830X1B 24 (61 cm) of Teflontubing to fit your container. Low Silhouette REPIPET Dispensers Ideal for shelf storage, fits easily in the refrigerator. Square bottle reduces the risk of damage from tipping. A second opening in the Halar - fluorocarbon cap allows you to add reagent without disturbing the dispenser. Supplied with 1000 ml square amber bottle. Halar cap may distort when exposed to organic solvents. Standard REPIPET Dispensers Perfect all purpose choice for dispensing all reagents except hydrofluoric acids, including concentrated acids, concentrated alkalis, chlorinated hydrocarbons, and organic solvents. Supplied with a 950 ml round amber bottle. Halar is a registered trademark of Ausimont U.S.A. Inc.
M I N I R E P I P E T D I S P E N S E R S Smaller reagent samples are conveniently stored and easily dispensed with the same precision characteristic of all REPIPET dispensers. These compact units also feature Pyrex and Teflon fluorocarbon construction for safe use with all liquids except hydrofluoric solutions. A 120 ml bottle is included, along with a specially designed stand that offers improved stability. For smaller reagent samples Safe for all reagents except HF Mini Repipet Dispensers Full range adjustability, 1% accuracy and 0.1% reproducibility at full scale guaranteed. Includes both magnifying indicator and metal indicator. 120 ml round, amber, glass bottle. Support stand provides stability. Model # Size Price MINI3001/2A 0.5 ml MINI3001A 1.0 ml MINI30021/2A 2.5 ml MINI3005A 5.0 ml MINI3010A 10.0 ml
Ground glass joints Dispensers/Dilutors G L A S S J O I N T R E P I P E T D I S P E N S E R S These specially constructed dispensers feature standard taper, ground glass joints that allow you to autoclave the instrument at temperatures up to 250 F for 15 minutes. Choose the dispenser-only option to fit your existing lab vessels, or select the container option that fits your application. The available containers include a standard reagent bottle, a 125 ml Erlenmeyer flask, or a 100 ml conical vessel perfect for conserving rare or expensive reagents. Dispensers and containers are safe with all liquids except hydrofluoric solutions. A Standard REPIPET dispenser with standard taper, ground glass joints. Full range adjustability, 1% accuracy and 0.1% reproducibility at full scale, guaranteed. Includes both magnifying indicator and metal indicator. Use with an Erlenmeyer flask on your hot plate Glass Joint Repipet Dispensers Dispenser with 100 ml Conical Vessel, glass intake tube Dispenser-only, Teflon intake tube 3001/2G 0.5 ml* 3001G 1.0 ml* 30021/2G 2.5 ml* 3005G 5.0 ml** 3010G 10.0 ml 3020G 20.0 ml 3050G 50.0 ml 3100G 100.0 ml * For use with Catalog #5000125, 125 ml Erlenmeyer Flask or Catalog #1170, 100 ml Conical Vessel ** For use with Catalog #1500500, 500 ml Corning bottle For use with Catalog #15001000, 1000 ml Corning bottle For use with Catalog #15002000, 2000 ml Corning bottle 3001/2GV 3001GV 30021/2GV 0.5 ml 1.0 ml 2.5 ml Dispenser with 125 ml Erlenmeyer Flask, glass intake tube 3001/2GE 0.5 ml 3001GE 1.0 ml 30021/2GE 2.5 ml Dispenser with Reagent Bottle, glass intake tube Model # Size (ml) Bottle Size Price 3005GR 5.0 ml 500 ml 3010GR 10.0.ml 1000 ml 3020GR 20.0 ml 1000 ml 3050GR 50.0 ml 2000 ml 3100GR 100.0 ml 2000 ml
R E P I P E T I I D I S P E N S E R S If your lab is faced with special safety concerns or equipment handling problems, REPIPET II Dispensers are an excellent choice. The barrel and plunger are constructed of extra-thick borosilicate glass sheathed in a tough, Halar sleeve. Materials used are chemically inert fluorocarbons, safe for use with all laboratory reagents except organic solvents and hydrofluoric solutions. REPIPET II is available in a Standard configuration that includes a wide-mouth, amber glass bottle or Universal model for use with your container. Excellent precision, with 1.5% accuracy and 0.2% reproducibility at full scale, guaranteed. Magnifying indicator for easy-reading accuracy Integrated 100-division scale Repipet II Dispensers Standard REPIPET II, with amber glass bottle Model # Size (ml) Bottle Size Price 9005 5.0 ml 500 ml 9010 10.0 ml 1250 ml 9020 20.0 ml 1250 ml Universal REPIPET II, with 3 caps/liners (sizes 28-430, 33-430, 38-430) and 12 (30 cm) teflon Tubing Model # Size Price 9005U 9010U 5.0 ml 10.0 ml 9020U 20.0 ml
REPIPET JR. CALIBRATABLE FIXED VOLUME DISPENSERS When the situation calls for repetitive dispensing of a volume, these REPIPET Jr. models do the job reliably and economically. There s a specially designed recirculating system for priming without loss of reagent. You can choose any of 13 sizes, from 0.1 ml (100µl) to 10 ml. Each model includes one amber glass bottle and one plastic container, but is also adaptable for use with any reagent bottle having a 20-400, 22-400, 24-400, 28-400 or 38-400 screw cap. We even include 12 extra inches (30.5 cm) of Teflon intake tubing to make sure the fit is perfect. 2% accuracy and 0.5% reproducibility at full scale. 5 interchangeable cap/adapter sets for container flexibility. Support stand provides added stability to 4 oz. (120 ml) bottle. 12 inches (30.5 cm) of Teflon tubing. Repipet Jr. Fixed Volume Calibratable Recirculating system Economical Model # Size (ml) Container Size Price 770100 0.1 ml 4 oz. (120 ml) 770200 0.2 ml 4 oz. (120 ml) 770500 0.5 ml 4 oz. (120 ml) 770700 0.7 ml 4 oz. (120 ml) 770900 0.9 ml 8 oz. (240 ml) 7701 1.0 ml 8 oz. (240 ml) Model # Size (ml) Container Size Price 7702 2.0 ml 8 oz. (240 ml) 77021/2 2.5 ml 8 oz. (240 ml) 7703 3.0 ml 8 oz. (240 ml) 7704 4.0 ml 16 oz. (480 ml) 7705 5.0 ml 16 oz. (480 ml) 7710 10.0 ml 16 oz. (480 ml) 77011/2 1.5 ml 8 oz. (240 ml) R E P I P E T J R. A D J U S T A B L E V O L U M E D I S P E N S E R 2% accuracy and 0.5% reproducibility at full scale 960 ml plastic bottle Economical and durable, these high density polyethylene and polypropylene dispensers define value for a number of laboratory applications. Consider the time saving, semi-automatic reloading feature for repetitive lab tests and they are clearly the most economical dispenser on the market today. They re an excellent choice for aqueous solutions and a wide variety of chemicals. (Not suitable for use with oils, hydrocarbons, iodine, petroleumbased chemicals, oxidizing acids, alicyclics or solvents.) 70021 2.0 ml Repipet Jr. Adjustable Volume 7005 5.0 ml 7010 10.0 ml
S I N G L E S T R O K E R E P I P E T D I L U T O R S Do it right the first time with our Single Stroke Repipet Dilutor. They re not expensive automatic dilutors but they certainly act like it. Fast and precise, these products give you single-action aspirating and diluting with just one cycle. In only 4-6 seconds! And they re economical, too. Choose from two models, both with easy-to-read magnifying indicators. Dilutes with a single action. Adapts to your container Single Stroke Repipet Dilutors As fast and precise as expensive automatic dilutors. The Single- Stroke REPIPET dilutes with a single action, aspirating and diluting with just one cycle. Lift the plunger to aspirate the sample, then press to dilute it with the reagent in the resident reservoir and deliver the diluted sample. The whole process takes only four to six seconds per dilution. Choose either the Low Silhouette model that includes a low-profile, amber, 1000 ml square bottle or the Universal REPIPET dilutor with three cap and washer sets and 24 inches of Teflon tubing. Both models feature magnifying indicators for easy reading accuracy. Pyrex glass and Teflon construction make all REPIPET dilutors safe for use with all reagents except hydrofluoric solutions. Models with two-opening, Halar lids are not recommended for use with organic solutions. Barrel Size Min. Ratio Diluent To Model # Dilutor Aspirator Aspirated Volumes Price Low Silhouette S80101/2L 1.0 ml 0.5 ml 1:1 S81001/2L 10.0 ml 0.75 ml 12:1 S81001L 10.0 ml 4.3 ml 2.3:1 Barrel Size Min. Ratio Diluent To Model # Dilutor Aspirator Aspirated Volumes Price Universal S80101/2U 1.0 ml 0.5 ml 1:1 S81001/2U 10.0 ml 0.75 ml 13:1 S81001U 10.0 ml 4.3 ml 2.3:1