Page 1 of 5 Socket, 6 and 12 Point, Polished Chrome The information below lists the required dimensional, chemical and physical characteristics of the products in this purchase order. If the order received does not meet these requirements, it may result in a supplier corrective action request, which could jeopardize your status as an approved vendor. Unless otherwise specified, all referenced consensus standards must be adhered to in their entirety. 1/4" Type I, Class 1, Sockets, Single and Double Hexagon 2123619 5/32" 0.093 0.094 0.281 0.510 1.010 60 2112408 2112401 3/16" 0.125 0.094 0.338 0.510 1.010 95 2112409 2112402 7/32" 0.125 0.109 0.382 0.510 1.010 135 2112410 2112403 1/4" 0.141 0.125 0.425 0.510 1.010 190 2112411 2112404 9/32" 0.172 0.141 0.457 0.510 1.010 250 2112412 2112405 5/16" 0.172 0.141 0.510 0.510 1.010 320 2112413 2112406 11/32" 0.203 0.156 0.547 0.547 1.010 400 2112414 2112346 3/8" 0.281 0.156 0.597 0.597 1.010 500 2112415 2112348 7/16" 0.281 0.219 0.683 0.683 1.010 500 2112416 2112350 1/2" 0.344 0.266 0.697 0.697 1.010 500 2112417 2112560 9/16" 0.406 0.328 0.778 0.778 1.010 500
Page 2 of 5 1/4" Type I, Class 2, Sockets, Single and Double Hexagon 2112390 2112379 3/16" 0.125 0.094 0.338 0.510 1.930 95 2112391 2112380 7/32" 0.125 0.109 0.382 0.510 1.930 135 2112392 2112381 1/4" 0.141 0.125 0.425 0.510 1.930 190 2112393 2112382 9/32" 0.172 0.141 0.457 0.510 1.930 250 2112394 2112383 5/16" 0.172 0.141 0.510 0.510 1.930 320 2112395 2112384 11/32" 0.203 0.156 0.547 0.547 1.930 400 2112396 2112385 3/8" 0.281 0.156 0.597 0.597 1.930 500 2112397 2112386 7/16" 0.281 0.219 0.683 0.683 1.930 500 2112398 2112387 1/2" 0.344 0.266 0.697 0.697 1.930 500 2112399 2112388 9/16" 0.406 0.328 0.778 0.778 1.930 500 3/8" Type I, Class 1, Sockets, Single and Double Hexagon 2123620 2112357 1/4" 0.141 0.125 0.472 0.690 1.260 270 2123621 2123634 5/16" 0.172 0.141 0.521 0.690 1.260 440 2123622 2112345 3/8" 0.281 0.156 0.613 0.690 1.260 660 2123623 2112347 7/16" 0.281 0.219 0.683 0.690 1.260 930 2123624 2112349 1/2" 0.344 0.266 0.751 0.880 1.260 1240 2123625 2112351 9/16" 0.406 0.328 0.814 0.880 1.260 1610 2123626 2112353 5/8" 0.469 0.375 0.890 0.890 1.260 2000 2123627 2112354 11/16" 0.469 0.375 0.968 0.968 1.260 2200 2123628 2112355 3/4" 0.531 0.437 1.110 1.110 1.260 2200 2123629 2112356 13/16" 0.594 0.453 1.141 1.141 1.406 2200 2123630 2112561 7/8" 0.656 0.500 1.250 1.250 1.406 2200 2123631-15/16" 0.717 0.500 1.310 1.310 1.650 2200
Page 3 of 5 3/8" Type I, Class 2, Sockets, Single and Double Hexagon 2123632 2123635 1/4" 0.141 0.125 0.472 0.690 1.750 270 2123633 2123636 5/16" 0.172 0.141 0.521 0.690 1.750 440 2112562 2123637 3/8" 0.281 0.156 0.613 0.690 1.750 660 2112563 2123638 7/16" 0.281 0.219 0.683 0.690 1.750 930 2112314 2123639 1/2" 0.344 0.266 0.751 0.880 1.750 1240 2112312 2123640 9/16" 0.406 0.328 0.814 0.880 1.875 1610 2112316 2123641 5/8" 0.469 0.375 0.890 0.890 2.000 2000 2112318 2123642 11/16" 0.469 0.375 0.968 0.968 2.125 2200 2112320 2123643 3/4" 0.531 0.437 1.110 1.110 2.125 2200 2112322 2123644 13/16" 0.594 0.453 1.141 1.141 2.480 2200 2112324 2123645 7/8" 0.656 0.500 1.250 1.250 2.480 2200-2123646 15/16" 0.717 0.500 1.310 1.310 2.480 2200 1/2" Type I, Class 2, Sockets, Single and Double Hexagon - 2112376 3/8'' 0.281 0.156 0.655 0.940 1.525 1100 2123647 2112564 7/16" 0.281 0.219 0.730 0.940 1.525 1500 2123648 2112565 1/2" 0.344 0.266 0.775 0.940 1.525 2000 2123649 2112566 9/16" 0.406 0.328 0.845 0.940 1.572 2600 2123650 2112568 5/8" 0.450 0.375 0.942 0.970 1.572 3300 2123651 2112567 11/16" 0.469 0.375 1.010 1.010 1.572 4100 2123652 2112569 3/4" 0.531 0.437 1.080 1.080 1.572 5000 2123653 2112570 13/16" 0.594 0.453 1.145 1.145 1.635 5000 2123654 2112571 7/8" 0.656 0.500 1.218 1.218 1.760 5000 2123655 2112572 15/16" 0.656 0.500 1.300 1.300 1.760 5000 2123656 2112372 1" 0.656 0.547 1.375 1.375 1.760 5000 2123657 2112373 1-1/16" 0.656 0.625 1.480 1.480 1.853 5000 2123658 2112374 1-1/8" 0.781 0.656 1.540 1.540 1.947 5000-2112377 1-3/16'' 0.781 0.656 1.675 1.675 1.947 5000-2112375 1-1/4" 0.781 0.750 1.750 1.750 2.015 5000
Page 4 of 5 1/2" Type I, Class 2, Sockets, Single and Double Hexagon - 2123663 7/16" 0.281 0.219 0.730 0.940 3.000 1500 2112313 2123664 1/2" 0.344 0.266 0.775 0.940 3.000 2000 2112311 2123665 9/16" 0.406 0.328 0.845 0.940 3.000 2600 2112315 2123666 5/8" 0.450 0.375 0.942 0.970 3.000 3300 2112317 2123667 11/16" 0.469 0.375 1.010 1.010 3.000 4100 2112319 2123668 3/4" 0.531 0.437 1.080 1.080 3.000 5000 2112321 2123669 13/16" 0.594 0.453 1.145 1.145 3.000 5000 2112323 2123670 7/8" 0.656 0.500 1.218 1.218 3.000 5000 2112325 2123671 15/16" 0.656 0.500 1.300 1.300 3.000 5000 2112326 2123672 1" 0.656 0.547 1.375 1.375 3.000 5000 2123659 2123673 1-1/16" 0.656 0.625 1.480 1.480 3.000 5000 2123660 2123674 1-1/8" 0.781 0.656 1.540 1.540 3.000 5000 2123661 2123675 1-1/4" 0.781 0.750 1.750 1.750 3.000 5000 2123662-1-1/2" 0.908 0.850 2.025 2.025 3.000 5000 3/4" Type I, Class 1, Sockets, Single and Double Hexagon Part Socket Clearance Nut Number 12 point Nom. Min. Min. Max. Max. Max. Min. 2112427 7/8" 0.656 0.500 1.385 1.575 2.010 7700 2112428 15/16" 0.656 0.546 1.450 1.575 2.010 8700 2112429 1" 0.656 0.546 1.520 1.575 2.072 9700 2112430 1-1/8" 0.781 0.656 1.680 1.680 2.322 11900 2112431 1-1/4" 0.781 0.750 1.870 1.870 2.385 14200 2123676 1-5/16" 0.906 0.765 1.920 1.920 2.510 15400 2123677 1-3/8" 0.906 0.781 1.980 1.980 2.635 16700 2112432 1-7/16" 0.906 0.850 2.075 2.075 2.635 18000 2112433 1-1/2" 1.031 0.850 2.145 2.145 2.635 18000 2112434 1-5/8" 1.031 1.000 2.325 2.325 2.760 18000 2112435 1-3/4" 1.156 1.093 2.510 2.510 3.135 18000 2123678 1-13/16" 1.156 1.125 2.575 2.575 3.260 18000 2123679 1-7/8" 1.281 1.125 2.695 2.695 3.385 18000 2112436 2" 1.281 1.218 2.885 2.885 3.510 18000 All dimensions are given in inches.
Page 5 of 5 Specification Requirements: Dimensions: ASME B107.110, Type I Socket Opening & Tolerance: Conforming to ASME B107.17 Material: CR-V or equivalent chromium alloy steel capable of meeting the mechanical requirements Mechanical Properties: Hardness: 38-56 HRC Performance: ASME B107.110 (Proof torque) Coating Adhesion Resistance: ASTM B571 File Test Method Marking: - ROCK RIVER -Size fractional (in) -Material Finish: Polished Chrome, Corrosion protected to ASTM B537, Class 6 or higher when tested per ASTM B117 for 48 hours