Software settings Follow these steps to create a keyboard layout. Create the keyboard products + layout B E A C D Select in A the item All You can choose any name and color for the Cocktail products list as you wont. OK Make sure you ve selected the Cocktail products list at A It s now possible to add products. In Field B we can add them. Here fore press again (but now in field B). Version 1.0 1-5
At Kind we chose for a CockItem. For the product number chose a new product number. (its easy to use this type of numbering: group + subgroup + number) Enter the name of the product. OK Don t forget to select in field E to witch Profit the product belongs. Do this for all the products! Make as many products as you use to make the cocktails. Now we have to create the cocktail products. Make sure you ve selected the Cocktail products list at A It s now possible to add products. In Field B we can add them. Here fore press again (but now in field B). At Kind we chose for a Cocktail. For the product number chose a new product number. (its easy to use this type of numbering: group + subgroup + number) Enter the name of the product. OK Don t forget to select in field E to witch Profit the product belongs. Do this for all the products! In field C you can see all the Cocktails you ve just created. We only need to add the cocktail items to the cocktail. Therefore select a cocktail and press in field C. Select a cocktail item. Set the quantity that s added in the cocktail. Quantity in cc (cl) OK Version 1.0 2-5
B E A C D Now we have to create a keyboard layout in field C. First select Tab Keyboard in field C in field C. Set Keyboard number and name. OK To put the products in the layout we only have to drag the products out field B to field D and put them in the right spot. It s only allowed to put cocktails to the keyboard layout. This drag and drop is done with the right mouse button. Also to move the buttons in this layout is done with the right mouse button. If there are more than 7x8 products or you won t to make the layout clearer there is a possibility to use the Shift layer. Dragging and dropping is done the same ass with the Normal layer. To delete a button, just select this button and press in field C. Version 1.0 3-5
Add a Cocktail keyboard + node to the network F G i H J Drag from field G (tab Design) and to field H. Use the right mouse button. Connect these 2 together with the button. Link the node Select the node (press on the node the service button) Wait until the node is linked. Go to field G, tab Reader to set the keyboard layout. Select the keyboard in field G In the column KeybdName you can set the keyboard layout we have made urlier on. again Now the layout is coupled with the keyboard. Version 1.0 4-5
Configure the Cocktail node In the keyboard we also need to define witch products on what line of the cocktail node are connected. Therefore select the To make the settings for the FastFlow: Make all the settings. again i Field i: Set the products (Cocktail items) at the concordant lines. Cal5cc: Normal you calibrate water, cola, soda, for 25cc. But the alcohols you calibrate for 5cc. When the cocktail item is calibrated for 5cc then check this box. Cal: this is the calibration value for 5cc or 25cc of the drink. Aqua1: When this is selected the Cocktail node will give water with the product. Ex for a syrup product (cola, fanta, ). Aque2: same as Aqua1, only for the 2 nd aqua line of the cocktail machine. Field J: At the bottom you can see the keyboard layout J Sometimes it s necessary to carry N reload on the keyboard before this will function well. Therefore press. Version 1.0 5-5