PB.757 VERSION 07.1016 For Ultra Heat Treated Milk Buttermilk Powder is manufactured by spray drying buttermilk, which is derived from the manufacture of cream products Product Characteristics > Good solubility > Uniform fat content > Heat Stable in evaporated milk formulations Suggested Uses > Recombined products such as evaporated milk, sweetened condensed milk and Ultra Heat Treated milk > Ice cream > Not for use in infant formula for infants less than 12 months. Packaging Typical Compositional Analysis The analysis results listed in this product bulletin are typical as measured on an as is basis. Refer to the selling specification for minimum and maximum limits by parameter. Protein (N x 6.38) (g/100g) 31.0 Moisture (g/100g) 3.8 Fat (g/100g) 7.8 Phospholipids(% of fat) 21 Total Carbohydrates (g/100g) 50.0 Minerals (g/100g) 7.4 Typical Chemical Titratable Acidity (%m/v) Inhibitory substances (IU/ml) Analysis <0.15 Multi-wall bag with a paper outer and an inner plastic liner No staples or metal fasteners are used Net weight Gross weight Storage and Handling 25.0kg 25.4kg Buttermilk Powder should be kept in a cool, dry, ventilated place. It is recommended that product is stored at below 25 C, relative humidity below 65% and in an odour free environment. Stocks should be used in rotation preferably within 24 months of manufacture
PB.757 VERSION 07.1016 For Ultra Heat Treated Milk Typical Nutritional Analysis Energy (kj/100g) Calories (kcal/100g) Energy from fat (kj/100g) Calories from fat (kcal/100g) Total Sugars (lactose) (g/100g) Fibre (g/100g) Cholesterol (mg/100g) Saturated fat (g/100g) Trans fat (g/100g) Vitamin A (µg/100g) Vitamin A (IU/100g) Vitamin C (mg/100g) Iron (mg/100g) Sodium (mg/100g) Calcium (mg/100g) Typical Physical Properties Bulk Density (g/ml) Insolubility Index (ml) Colour Flavour Odour Scorched particles Foreign matter 1665 398 290 69 50.0 <1 70 5.2 0.4 60 200 9 0.6 405 1240 0.65 <1.0ml Pale cream Rich and creamy Clean Max B Typical Microbiological Analysis Aerobic Plate Count (cfu/g) <20,000 Aerobic Thermophilic Spores (cfu/g) <1000 Coliforms (/g) Escherichia. coli (/g) Yeasts and Moulds (cfu/g) <50 Coagulase Positive Staphylococci (/g) Salmonella (/750g) Absent Quality Assurance Strict quality control procedures are enforced during manufacture. The manufacturing environment is also subject to regular monitoring and control. Final product is sampled and tested for chemical, sensory and microbial parameters using internationally recognised procedures. During storage and shipment, precautions are taken to ensure that the product quality is maintained. Each package is identified, enabling trace back. Compliance > Halal Suggested Labelling Buttermilk Powder Allergens: Contains Milk and Dairy products. For additional information refer to the allergen statement Country regulations for product labelling vary. Fonterra advises customers that they need to check local regulations to determine the correct labelling of this ingredient Additional Information Fonterra will only ship this product to countries listed on the Import Eligibility Statement and bidders Contracting Information File.
PB.757 (SS) VERSION 04.0316 For UHT Milk Chemical Protein (N x 6.38) As is % m/m 30.0 Moisture %m/m 4.0 Fat % m/m 7.0 13.0 Titratable Acidity % m/v 0.16 Microbiological Aerobic Plate Count cfu/g 20000 Aerobic Thermophilic Spores cfu/g 1000 Coliforms /g Escherichia. coli /g Yeast and Mould cfu/g 50 Staphylococci. Coagulase. Positive /g Salmonella /750g Absent Physical Foreign matter /25g Insolubility Index ml 1.0 Scorched particles /25g B Sensory Flavour Typical/Atypical Typical
PB.757 (SS) VERSION 04.0316 For UHT Milk Other > Fonterra will only ship this product to countries listed on the Import Eligibility Statement and bidders Contracting Information File
DATE: 10 October 2017 For Ultra Heat Treated Milk Fonterra will only ship Buttermilk Powder for Ultra Heat Treated Milk to the countries that are specifically listed below: If you want this product shipped to a country that is not listed below, please contact a Fonterra representative. There is no obligation on Fonterra to ship to a country that is not listed or has not been agreed between the customer and Fonterra prior to purchase. **Prior to contracting with Fonterra, importers or agents must ensure that they meet all registration requirements imposed by their importing government agencies. Destination Country Angola Gabon Mongolia Tanzania Australia Gambia Morocco **Thailand Azerbaijan Ghana Mozambique Togo Bahrain Georgia Myanmar Uganda Bangladesh Guatemala New Zealand United Arab Emirates Benin Guinea Niger **Venezuela Bhutan Guinea-Bissau Nigeria Vietnam Botswana **Honduras Oman Yemen **Brazil Hong Kong Pakistan Zambia Burkina Faso Iraq **Panama Zimbabwe Burundi Jamaica **Peru Cameroon Japan Philippines Canada Jordan Republic of the Congo Cape Verde Kenya Rwanda Central African Republic Kuwait Sao Tome and Principe Chad Lesotho Saudi Arabia China Liberia Senegal Colombia Madagascar Seychelles Comoros Malaysia Singapore Congo, Democratic Republic Malawi Sierra Leone **Costa Rica Mali Somalia Cote d'ivoire Mauritania South Africa Djibouti Mauritius Suriname Egypt Mauritius Swaziland Equatorial Guinea Mexico Syria Ethiopia Moldavia Taiwan R.O.C. contained in this document or that they are suitable for your intended use. The information and/or opinions contained in this document may be changed at any time without notice. Nothing contained in this document should be construed as permission to infringe any intellectual property right or as a warranty of non-infringement of any intellectual property right. Please note that some products and applications may not be available and/or admissible. This Eligibility Statement should be used in conjunction of Product Bulletin Number and Selling Specifications Number: PB / SS 757.