CRUCIBLE CRUCIBLE SECTION PG. LID SLIDER TOP FLANGE LID Lid and Handle/Slider assembly 3-4 SLIDER TOP FLANGE TOP GLASS MOUNTING RODS Lid and Handle/Slider assembly Top Glass and Top Flange Top Glass and Top Flange Central Flange and Mounting Rods 3-4 5-6 5-6 7-8 TOP GLASS CENTRAL FLANGE Central Flange and Mounting Rods 7-8 BOTTOM GLASS Bottom Glass and Bottom Flange 9-10 MOUNTING RODS BOTTOM FLANGE Bottom Glass and Bottom Flange 9-10 CENTRAL FLANGE TAP HANDLE Tap Handle assembly 11-12 POUR SPOUT Pour Spout assembly 13-14 BOTTOM GLASS TAP HANDLE BOTTOM FLANGE POUR SPOUT 1. 2.
LID AND HANDLE/SLIDER LID AND HANDLE/SLIDER HW-132 HW-132 HW-132 HW-421 CA-107-2 HW-132 18-8 SS Flat Head 6-32 1/2" CA-107-2 Lid Handle (Avocado) HW-420 CA-105-6 Small handle (color must be noted) HW-421 Cotter Pin for Crucible CA-105-6 Top Flange Hinge Lid CA-104-5 HW-420 Clevis Pin for Crucible CA-110-3 CA-106-5 CA-104-5 Top Flange Slider Box CA-106-5 Hinge Lid Slider -2 CA-110-3 Slider Catch Stop Insert HW-130 HW-143 HW-130 18-8 SS Flat Head 6-32 1/4" HW-143 18-8 SS Flat Head 6-32 3/4-2 CA-106-5 CA-107-2 * EPOXY HANDLES TO PEGS/THREADED RODS WITH JB WELD WATER WELD EPOXY PUTTY -2 FIG.18 3. 4.
TOP GLASS AND TOP FLANGE TOP GLASS AND TOP FLANGE 18-8 SS Fillister head 6-32 7/8 CA-102-3 Top Flange CA-102-3 Seating O-Ring Centering O-Ring Upper Chamber Support Rod SSA-TOP GLASS Top Glass 5 1/2 Lgth SSA-Top Glass 5. 6.
CENTRAL FLANGE AND MOUNTING RODS CENTRAL FLANGE AND MOUNTING RODS Crucible Check Valve Head Crucible Check Valve O-Ring CA-990-2 Steam Mounting Rod OR-011 Mounting Rod O-Ring HW-305 Crucible Thermistor Silicone Tube Seal Set Screw 18-8 SS 6-32 3/4 CA-990-2 OR-011 HW-305 CA-014-1 CA-026-CRUCIBLE Mounting Rod Crucible Thermistor CA-009-3 18-8 SS Flat Head 6-32 3/4 CA-816-3 Magnetic Seal Plate CA-014-1 CA-009-3 HW-304 Magnet Plate Silicone Grommet OR-011 CA-816-3 HW-130 18-8 SS Flat Head 6-32 1/4" HW-305 HW-304 CA-033-15 Crucible Check Valve Lifter CA-026 CA-033-15 HW-130 HW-130 7. 8.
BOTTOM GLASS AND BOTTOM FLANGE BOTTOM GLASS AND BOTTOM FLANGE 18-8 SS Fillister head 6-32 7/8 CA-998-1 CA-998-1 Bottom Flange Seating O-Ring Centering O-Ring SSA-BOTTOM GLASS Lower Chamber Support Rod SSA-BOTTOM GLASS Bottom Crucible Glass 7 Lgth SSA-LOVE STRAW CA-010 SS Love Straw Fitting epoxied to CA-030 Glass Tube SSA-LOVE STRAW 9. 10.
TAP HANDLE TAP HANDLE CA-100-3 CA-400 CA-100-3 Tap Handle Magnet Block + - CA-101-3 CA-400 Tap Handle Magnet 3/8 Diam. 3/8 Lgth + - HW-130 HW-130 CA-101-3 Tap Handle Magnet Plate HW-130 18-8 SS Flathead 6-32 1/4 Small Handle (color must be indicated) CA-400 CA-100-3 HW-142 HW-142 SCREW HW-142 THROUGH CA-100-3 TO ALLOW EVEN AMOUNTS OF THREADS ABOVE AND BELOW TO EPOXY IN BOTH -2 ABOVE AND CA-111-2 BELOW * EPOXY HANDLES TO PEGS/THREADED RODS WITH JB WELD WATER WELD EPOXY PUTTY CA-111 HW-142 Set Screw 18-8 SS 10-24 1 1/2 CA-111 Tap Handle (color must be indicated) TAP HANDLE SCREW TAP HANDLE DOWN ONTO CA-904 UNTIL TOP FACE OF CA-100-3 IS LEVEL WITH TOP FACE OF CA-009-2 AS SHOWN AT "H" THEN TURN CA-900 COUNTER CLOCKWISE UNTIL TIGHT ON TAP HANDLE 11. 12.
POUR SPOUT POUR SPOUT CA-985-8 HW-410 CA-420 POUR SPOUT OR-017 18-8 SS Fillister Head 6-32 7/8 Pour Spout to Bottom Flange O-Ring HW-409 OR-017 CA-985-8 HW-410 Pour Spout Internal Shaft Washer for Faucet Shaft Assembly HW-411 CA-420 Washer For Pour Spout Internal, SS HW-409 Spring for Tap Internal Shaft,.5'' LENGTH CA-900 HW-411 Nut for Faucet Shaft Assembly SS SSSA-BONNET CA-901 CA-900 Faucet Collar for Faucet Lever CA-902 SSSA-BONNET CA-901 Pour Spout Bonnet CA-903 CA-904 CA-902 Friction Washer for Faucet Lever Assembly CA-997-2 OR-014 CA-999-3 CA-904 CA-900 SSSA-BONNET CA-901 CA-997-2 CA-902 CA-903 OR-014 CA-903 CA-904 CA-997-2 Ball Washer, Teflon, Faucet Lever Assembly Pour Spout Lever Threaded Tap Handle Adapter OR-014 Tap Handle Plug O-Ring CA-999-3 Pour Spout OR-020 Pour Spout Plug O-Ring POUR SPOUT INTERNAL OR-020 CA-996-1 POUR SPOUT INTERNAL CA-996-1 Pour Spout Plug 13. 14.