...WITH A PASSION FOR COFFEE. Service manual COFFEE QUEEN. Harmony hot n cold TT. Your retail dealer S / EN ... Rev

Transcription

1 ...WITH A PASSION FOR COFFEE Service manual COFFEE QUEEN Harmony hot n cold TT Your retail dealer S / EN Rev

2 1. Table (list) of contents. 1. Table of contents page General 3 3. Overview of components front 4 3. Overview of components mixing system 5 4. SERVICE: Installation and start 6-7 Place the brewer Connections: Electricity/Water Starting up machine Fill canisters with ingredients Fill bean container with coffee beans 5. Operation Brewing of coffee in cup 8 Brewing of jug 9 6. Cleaning program Automatic cleaning of mixing bowls 10 Automatic cleaning of In/Outlet valves 11 Rotate brew mechanism without water or ingredients 12 Automatic cleaning of brew mechanism, mixing bowl Weekly cleaning dismantle mixer system 15 wash these parts 15 assemble mixer system Cleaning and maintenance Outward cleaning and when needed 17 Cleaning, grinder 17 Cleaning and dismantling of coffee filter 18 Maintenance, grinder 19 Maintenance, condenser Cup counter and Easy access Safety functions Failure messages Storage / Transport Dimension sketch Circuit diagram Installation of coin mechanism Cooling unit, cooled water Exchange of water cleaning filter Spare parts list Exploded View

3 2. General. Harmony hot n cold TT We congratulate to your choice of a Coffee Queen Harmony Freshbrew machine. Please read this manual before you take the machine into operation for the first time. The manual contains important instructions for a safe and proper use of the machine. Always keep this manual within reach for the user! Coffee Queen Harmony hot n cold, a fully-automatic freshbrew machine. - Making coffee cup by cup - With an internal grinder for grinding of coffee beans - Serving cold, filtered water carbonated or still - Jug facility with key switch - 11 choices of drinks, - 3 ingredients canisters + bean container, - Brewing mechanism with coffee filter - Electronically temperature controlled - Adjustable coffee strength - Illuminated cup while brewing - Clock functions Facts: Height Width Depth Weight Tankage Electricity Water connection Chilled water Refrigerant Ingredients canisters 925 mm 420 mm 580 mm 43kg (+ ground cabinet 25kg) packing approx.5kg 2,4 litre 230V/2200W+170W ½ outside thread (enclosed) litre / hour HFC-134A 1. espresso 1. chocolate 1. topping 1. coffee beans 3.

4 3. Overview of components, front Harmony hot n cold TT Lid, bean container Bean container Display Strength of drinks ++ / - - Key switch Drinks Door lock Outlet Cold water Outlet for drinks Cupholder Drip tray insert Drip tray Optional: Base cabinet with storage and large waste bin. 4.

5 3. Overview of components, mixer system. Harmony hot n cold TT Bean container Ingredientscanister Grinder Chute Mixer bowls FUSE holder Brewing mechanism ON/OFF switch Door lock Outlet cold water Outlet drinks Waste box Detail; Ingredients; Width; Height; Capacity./cups Volume/litre Amount/unit Canister; coffee beans ,5kg / 208 7,3 1 Canister; espresso ,5kg / 220 2,55 1 Canister; chocolate ,5kg / 50 2,55 1 Canister; topping ,1kg / 120 2,

6 4. Service. Installation and start Harmony hot n cold TT 1. Place brewer on a flat Connect the electrical plug to a separate level and waterproof surface. grounded wall socket 230V 10A 90º OBSERVE! Make sure there is a space behind the machine for free flow of air. ( minimum 10cm ). 2. Connect attached water tube to cold water with an R 1/2. Make sure that the water hose not are kinked anywhere when machine is pushed into place. Please flush the water tube before connecting to machine, this to avoid any particles to damage the inlet valve. 3. Open the water inlet. 4. Turn on the ON-OFF switch inside the door. Water is been filled into the tank automatically with 2,4 litres of water. The heating will not start before the water level reaches the level sensor. ON / OFF switch Set temperature is approx 97ºC. 5. Close door. 6. When the water is heated to right temperature. please wait The message please wait will disappear. NOTE! Machine must be heated before chilled water can be in use. 7. Push button for chilled water until water is coming in a even flow. 8. Wait for approximately 10 minutes then machine is ready to use. (IThis for water shall getting cold). Please wait 6.

7 4. Service. Installation and start Harmony hot n cold TT 9. Fill canisters with ingredients. Take out (this to avoid unnecessary spillage in the machine) ingredient canisters and fill them with ingredients. 10. When placing the ingredient canisters; Make sure that the outlet pipes on the ingredient canisters are touching the steam traps. see (A). (A). (A). 11. Fill bean container with coffee beans. 1. Remove lid on bean container and fill bean container with coffee beans without additives (as tasted oils or sugar). 2. Open closing hatch on bean container. When water in tank has the right temperature the message Low temp will disappear and please wait the machine is ready to use. 7.

8 5. Operation: Brewing of coffee in cup Harmony hot n cold TT Brewing of coffee in cup, etc. 1. Place a cup in the centre of the cup holder The strength has a standard setting, if you wish to increase or decrease it, do as follows if not continue to point 3. Stronger drink; Increase by pushing + or ++ for 5% or 10% alternative Weaker drink; Decrease by pushing - or -- for 5% or 10% (the indication lamp will go up or down depending of choice). 3. Choose drink by pushing on the button to the right of each menu. The display will show; Please wait, and the cup will be illuminated. A. Wait until the light on cup and message Please wait has been turned off before you take your cup. Cold water in a glas. 4. Place a glas under the outlet for cold water (A). Then push button for cold water. 8.

9 5. Operation: Brewing of jug Harmony hot n cold TT Brewing of jug. 1. Lift up the cupholder. Place a jug in the centre of drip tray Turn on the key with jug symbole clockwise cups of brewing is standard settings, Change amount of cups by pushing + or - button. Optional up to 12 cups or down to 1 cup brewing. 4. Push the button for drink 1. Wait until the light and message Please wait has been turned off before you take out the jug. Serve a jug with good coffee. Serving pot 1, 8L art.nr Serving pot 1,2L art.nr

10 6. Cleaning program. Harmony hot n cold TT Weekly cleaning! Automatic cleaning of mixing bowls 2 or 3. If you only wish to clean the mixer bowl and whipper house; Follow these instructions: The mixer bowls can easily be cleaned with the key switch in cup (normal) position. Automatic cleaning of mixer bowl No: Place a jug in the drip tray. 2. Turn the key (1) slowly ninety degrees and back again. 3. Push button (3) for 6 seconds. After 4 seconds the signal will go faster. After 6 seconds the mixer bowl and the whipper house no.2 starts to be cleaned for 5 seconds. The display shows: Cleaning Automatic cleaning of mixer bowl No:3 1. Place a jug in the drip tray. 2. Turn the key slowly ninety degrees and back again. 4. Push button (4) for 6 seconds. After 4 seconds the signal will go faster. After 6 seconds the mixer bowl and the whipper house no.3 starts to be cleaned for 5 seconds. The display shows: Cleaning 3. By cleaning means that water is flushed and whipper motor rotates. 10.

11 6. Cleaning program CLEANING: Harmony hot n cold TT Automatic cleaning of In/Outlet valves: The In/Outlet valves can easily be cleaned with the key switch in cup (normal) position. 1. Place a jug in the drip tray. 2. Turn the key slowly ninety degrees and back again. 3. Push button for drink 1 and 2 at the same time for 6 seconds. 2. Keep buttons down. All In/Outlet valves will now start to open and close with 2 pulses/second in 10 seconds or as long as you hold the buttons. 3 The display shows: Cleaning valves Push button for drink 2 for making a brew cycle and flush remaining water and scale from the cleaning. 11.

12 6. Cleaning program CLEANING: Harmony hot n cold TT Rotate brew mechanism without water or ingredients: The brew mechanism can be rotatedwithout water and ingredients with the key switch in cup (normal) position.to be used when brew mechanism has been dismounted forwashing and shall be remounted. 1. Push + button for 6 seconds After 4 seconds the signal will go faster. The display shows: Change paper/rotate Push E/ Push + button. The display shows: Rotate cycle without water. 3. Push button for drink 2. The display shows: Rotate The brew mechanism rotate one turn without water and ingredients and the mechanism falls into position if it has been dismounted. 3 Observe! The push rod shall be in position 8 o clock If not take out again and repeat the procedure. Eight (8) o clock. 12.

13 6. Cleaning program CLEANING Harmony hot n cold TT Automatic cleaning of brew mechanism, mixing bowl: Shall been done every week. The brewmechanism can easily be cleaned with the key switch in cup (normal) position. Fig. B Turn the key slowly ninety degress and back again. Push button for drink 1 for 6 seconds. Fig. A 2. After 4 seconds the signal will go faster. 3. After 6 seconds The display shows; Open door load detergent. 4. Fill 25gr detergent (one portion bag, see fig. A ) into the brew mechanism. fig. B.(Detergent will be supplied from your dealer) 5. The display shows; Close door 6. The display shows; When ready press key Place a jug into the drip tray and push button for drink 1 7. The display shows; Cleaning mixer (2...) 8. The display shows: Rinsing coffee Soak time: The machine start to count down from 300 seconds. 9. The display shows. Brewer cycle the machine is counting down. To stop cleaning process: push Stop button. The brew mechanism will go back to start position. NOTE! Dont stop the process when detergent has been loaded the cleaning process must be finished. IMPORTANT! Cleaning of brew house. After the automatic cleaning program is finished. Clean brew house! This must be done, to make sure that you will remove residual detergents and coffee remains! Dismantling and cleaning/washing brew house: Do as follow in paragraph If machine not will go back in start position. Restart machine. 10. Push + button for 6 seconds 11. The display shows: Change paper/rotate Push E/ Pusk button for drink The display shows; Preparing paperload. 14. The machine will rotate in position. 15. The display shows, Change paper 16. Open door, dismantle, clean and reassemble brew house. see page Close door. 18. Machine is ready to use again. 19. Take out a cup of coffee and pour it out to make sure that there is nothing left of detergent. 13.

14 6. Cleaning program CLEANING Harmony hot n cold TT Dismantling and cleaning brew house: Dismantle brew house: Flush brew house! To remove detergent and coffee remnants. Reassemble brew house. NOTE! When reassemble brew house make sure that (B) wiper are between (A) arms. 4. Important! wash carefully To remove cleaning and coffee remains 14.

15 7. CLEANING: Weekly cleaning Harmony Dismantle : Mixer system 1. Loosen outlet hose (A) turn lock knob (B) anti-clockwise. and 2. Loosen mixer bowl. Pull apart (C). Cleaning 5. Clean with a wet rag and drought drily. Wash these parts: (B) (A) (C).6. A. Mixer bowl 3. Loosen whipper (D) pull whipper straight out from the machine. 4. Turn lock knob anticlockwise.(e) until it stops B. Steam trap C. Whipper D. Assembly plate (D) (E) Make sure this parts are dry before use 15.

16 7. CLEANING: Weekly cleaning Harmony REASSEMBLE: Mixer system 7. Reassemble the assembly plate by turning lock knob (F) clockwise. INSPECT gaskets. 8. Make sure that the motor whippers plane side will be in accordance with the whippers plane side. see next (G) and picture (H). pil (G). INSPECT F F (G) INSPECT F 9. Assemble whipper, pull until you hear a clicking noise. (H). 10. Assemble mixer bowl and steam trap (J) see picture. 11. Easily push the mixer bowl towards, according to (K) and lock with lock knob (L).Connect outlet hose (M). (NOTE! make sure that all water hose are connected at right place (H) (J) (J) (K) (J) (M) (L) 16.

17 8. Cleaning and maintenance Harmony hot n cold TT Cleaning when needed. Cleaning bean container. Outside cleaning; use a soft rag and liquid cleaning agent to prevent scratches. 1. Shut closing hatch. 2. Dismantle bean container. Use a soft rag and liquid cleaning agent to prevent scratches. Note! Make sure that all parts are dry before use. Cleaning of grinder. Should be done every sixth month, of an authorized service technician. 17.

18 8. Cleaning and maintenance. Harmony hot n cold TT Dismantling and cleaning coffee filter. A tool dismantling the coffee filter, comes with machine Push + button for 6 seconds. After 6 seconds the display shows; Change paper/ Rotate Push E/+. 2. Push button for drink 2. The display shows; Preparing paperload. The machine will rotate in position. When the display shows, Change paper open the door and insert the dismantling tool (A) through the brewer spout all the way to the back of the cylinder, then slide it up until contact is made with the screen assembly.fig. 1. Push up on the rear of the screen assembly until it pops out of the cylinder.fig. 2. Fig º Celsius.10 minutes 3. Soak the screen assembly in a solution of 25gr. cleaning agent in 3dl water for a maximum of 10 minutes.fig dl water Fig. 2. Fig. 1. (Cleaning agent is supplied by your retail dealer) 4. Remount the screen assembly and close the door. Then the machine will return to start position and the machine is ready for use. If machine not will go back in start position. Restart machine! 5. Make a cup of coffee and throw it out. To make sure that there is nothing left of detergent. (A) Prolonged contact with cleaning agent may damage the screen assembly. Once this is done, the screen should then be thoroughly rinsed with dish soap and warm water to remove any leftover residue. Cleaning agent: (brew mechanism) Coffee Queen article no Filter: (brew mechanism) Coffee Queen article no Tool: (dismantling filter) Coffee Queen article no

19 8. Maintenance, Grinder. Harmony hot n cold TT Adjustments: The adjustment of the blades is set at the factory. All maintenance, adjustments and installations shall be done of an Coffee Queen authorized service technician. This coffee grinder is only constructed to grind coffee beans without additives (as tasted oils or sugar). Any kind of use apart from that is improper and therefore unauthorized, the producer refuses all responsibility for damages arising from improper use of the coffee grinder described in this instruction. Bean container Grinder, house Outlet for grinded coffee Closing hatch 19.

20 8. Cleaning and maintenance Condenser Harmony hot n cold TT Condenser cleaning: Chiller unit. Must be cleaned every 6 month. With an extremily dusty environment you must have a much moore frequently cleaning. 1. Loosen screw. see fig A. 2. Loosen hose couplings. Pull out chiller unit.see fig B. 3. Clean condenser (C) from dust,(between cooling flange) by using a brush, vacuum cleaner or compressed air. (C) 20.

21 9. Cup counter and Easy Access Harmony hot n cold TT Cup counter: The machine has a cup counter which is available to see and reset with the key switch in cup (normal) position Push - button for 6 seconds. After 4 seconds the signal will go faster.. The display shows: Total xxx cups 2. Push button for drink 2. The display shows: Choice 1 free xxx cups 3. Push button for drink 2. The display shows Choice 1 coin xxx cups 4. Push button for drink 2. The display shows Choice 1 xxx cups in can 5. Push + button to reach to choice 2 etc. 6. Push choice 3 to reset the counter. 7. Push Stop button to go back to user mode. Easy Access: Volume and strength can be adjusted with±15% with the key switch in cup (normal) position Push + and - button at the same time. After 4 seconds the signal will go faster. The display shows: Easy access strength 1 100% 2. Choose the drink you want to change by pushing + or - button. 3. Push button for drink 2. The display shows: for example. Volume 4 and Blinking 100% Change by pushing + or - button. 4. Push button for drink 2 to confirm the change. Press stop to go back to user mode. 21.

22 10. Safety functions. Harmony hot n cold TT The machine is equipped with following safety functions 1. Indication of door Door not closed The display shows; Door open 2. When machine is not in use: Valves are blocked. Door open 11. Failure messages. Failure messages which can mostly be corrected without any help from service company 1. The display shows; Blocked Water level low Please check incoming water connection Turn off the machine with the main switch wait for 10 sec. and turn on again. 2. The display shows normal: but no drink is coming. Possible cause of failure: Mechanical stop in the ingredients canisters or whipper. Blocked Measure: Try to find the cause of failure. Clean the mixer system and try again. 12. Storage / Transport. Transport and no use in long time. 1. Turn off the switch, pull out the plug and close incoming water tube. 2. Empty the water tank. 3. Keep machine free from frost. Long machine storage at temperatures below 0ºC (zero degrees celsius) can cause damage of the machine. Total emptying of water is recommended. 22.

23 13. Dimension sketch. Harmony hot n cold TT 23.

24 14. Circuit diagram. 24.

25 15. Installation of coin mechanism. Installation of coin mechanism for freshbrew machines CQ. IMPORTANT: Installation must been done of an authorized technician. 1. Assemble coin mec and connect to display-card, placed inside door. (see fig. 10). ( Connect with the enclosed fig.(10) cable (A). Make sure that power is off. (A) Connection Connection placement; Version

26 16. Cooling unit, cooled water Harmony hot n cold TT Cooling unit Thermostat Fan Condenser Water OUT Water IN Compressor Dryer 26.

27 17. Exchange of water cleaning filter. Change every sixth month To make sure a high quality on your drinks. change water cleaning filter every sixth month. Exchanging water cleaning filter. The display shows: change filter 1. Loosen cartridge by turn it 1/4 lap. See fig. A. (Open) 2. Assemble the new cartridge by turn it 1/4 lap. See fig. A. (Close) Fig. A. 3. Reset Timer: go to Easy Access. (Push + and - button at same time. Change with + or - button, until display shows filter ). Push E button twice to reset counter. (By reset counter means that a new adjustment is done, valid a new period of 6 month before the display shows change filter again). Filter from below 4. Now push the button for cold water. Push until water is coming out in a regularly flow. Only use Coffee Queen original water cleaning filter: Article no:

28 18. Spare parts lists. Harmony hot n cold TT Description; Art. no Pos. no. Amount/unit Level sensor complete Gasket, silicone for sensor Heating element 2200W 230V Water tank complete Gasket, (lid water tank) Motor gear 145 rpm, without axle Motor axle for , 16mm High limit controll, Bulba 73mm NTC thermistor Rubber grommet, inlet for NTC thermistor Valve outlet 24 V DC Membrane Inlet, for valve Plug (watertank) Bulk head adaptor, mixing bowl Switch 2 pol (illumin.) Steam trap Mixing bowl Whipper Motor whipper 24V F Whipper motor plate Assembly plate Slinger disc Grommet for whipper pin O-ring for assembly plate mod. F Outlet brew mech./angled Outlet brew mech./extender Outlet brew mech./adapter O-ring 36,2 x 3, O-ring 15,6 x 1, Foam (filter) for dust trap Dust trap Valve, double outlet 24V Silicone hose inlet / water tank 8x12 L= Silicone hose water tank / drain 8x12 L= Silicone hose The 8x12 L= Silicone hose water tank 8x12 L= Silicone hose outlet valv./choco 8x12 L= Silicone hose outlet valv./brewm 8x12 L= Silicone hose mixer 1/Outlet 8x12 L= Note! Silicone hose (by the metre (amer. meter) 28.

29 18. Spare parts lists. Harmony hot n cold TT Description; Art. no. Pos. no. Amount/unit Fan Grid cover for fan Valve inlet 2,5 l/min Solid-state relay Electronic card Ver. II Fuse 4 Ampere (slow 5x20) Decal - fuse 5/1Amp. slow Decal - fuse 4 Amp. slow Brew engine unit compl Brewer dock white Pin 3,5x Pin 2,0x Microswitch V5J (brew engine) Main supply cable, Europa Inlet-plug and socket Fuse holder Fuse 2 Amp. slow 5x Decal - fuse 2 Amp. slow Connection block PA Gable (connection block) PA Transformer Micro switch Waste box, top cabinet Brew mechanism, complete Tool, dismantling of filter Grinder 230 VAC Bean container Lid, bean container Operating capacitor 12 μf Relay Socket, relay Water filter compl. + holder with patron Filter head Filter cartridge

30 18. Spare parts lists. Harmony hot n cold TT Description; Art. no. Pos. no. Amount/unit Ingredients canister B67 x H250 plastic Lid Chute, left Outlet, canister Cup holder Diode lamp complete Drip tray Drip tray insert Flat conductor cable Display board Ver Key-switch Membrane switch Lock with clamp(door) Instant Key, (door) Instant Service key (tool) Drip pan, base cabinet Foot, base cabinet Foot, adjustable Drip tray sensor (coil spring/ close coiled) Inlet hose 3/4 x1/2 (water main) Cooling unit Compressor GD 40 MB Starting capacitor för GD 40 MB Thermostat K-50 L Filter-dryer 10g 6,2-2, Condenser STFT MINI Klixon Fan SUNON MBT Cooling unit JG corner 8x8 (1037) Relay

31 18. Spare parts lists. Grinder Harmony hot n cold TT Description; Art. no. Pos. no. Amount/unit Motor C Inlet housing Slotted pan head screw DIN M4x Adjustment shaft Adjustment pinion Pressure spring Allen set screw DIN M5x Slotted cylinder head screw DIN 84 - M4x O-ring Worm shaft Allen screw DIN M4x4 - stainless steel Grinding disc carrier - fixed Fixed grinding disc Grinding disc carrier - rotating Rotating grinding disc Pan head screw DIN 85 M5x Washer DIN ,5 stainless steel Hexagon nut left-hand thread Grinding housing Allen screw DIN M4x Outlet tube, metal Allen set screw DIN M4x Outlet, silicone hose (30mm) 16x

32 18. Spare parts lists. Brew mechanism Harmony hot n cold TT Description: Article no. Pos.no. Amount / unit Deflector, Cylinder Pin, Crank Arm O-ring Piston Rubber Ring, Piston Teflon Seal Plate, Top Screw, 8 x 1/2, Truss, AB, TAPP Cylinder Plug, Vent, Cylinder Screw, 4-40 x ¼, Truss Screw, 8-32 x ½, Truss Assembly, Filter Screen, Poly, # Seal, Brew Chamber Bar, Latch Carriage, Wiper Rod, Carriage, Wiper Retaining Ring, Wiper, Complete Brew Chamber Spring Clip, Latch Bar Housing, Vertical Rod Cam, Triple Unwipe Arm Assembly Spacer, Wipe Arm Spring, Wipe Arm Retaining Ring,TRU ARC Vevarm Plate, Ret., Cycle Plate, Ret., Support Latch, Block, LHS Latch, Block, RHS Retaining Ring Tube, Outlet, Water Wrap, Brew Chamber Shim 0, Shim 0, Spacer, Sil., 3/16 x.350 x Spring, H-Frame H-Frame Screw, 8-32 x 3/4, PAN Pin, Grooved, 3/16 x Wipe Arm, Assembly Vertical Rod, Welded

33 19. Exploded View. Tank and mixing system Harmony hot n cold TT Pos. 33 Silicone hose sales by metre 33.

34 19. Exploded View. Parts in machine Harmony hot n cold TT Fuse holder FUSE 4 AT 5x decal fuse 46 5 amp Waste box 76 Fuse holder 54 Filter FUSE 2 AT 5x20 decal fuse

35 19. Exploded View. Ingredient canister Harmony hot n cold TT 81 Parts; canister 67 x endast espresso 35.

36 19. Exploded View. Door Harmony hot n cold TT Drip tray sensor Diode lamp complete

37 19. Exploded View. Cooling unit Harmony hot n cold TT

38 19. Exploded View. Grinder

39 19. Exploded View. Brew mechanism

40 19. Exploded View. Brew mechanism

41 COFFEE QUEEN Harmony, hot n cold TT FOR SERVICE Your retail dealer COFFEE QUEEN AB, Box 960, ARVIKA, besöksadress; Korpralsv 1B, Tel vxl; +46 (0) , Fax; +46 (0) info@coffeequeen.se Art. nr/art. no