ecomist Mist Eliminators

Size: px

Start display at page:

Download "ecomist Mist Eliminators"

Zoe Owens
6 years ago
Views:

1 ecomist Mist Elimators ,000 scfm Installation Manual

TECHNICAL SPECIFICATION 1. Maximum Workg Pressure 150 psi g (10 bar g) 2. Maximum Operatg Temperature 200 F (93 C) 3. EM125 - EM500 Inlet/Outlet connections: 2 NPT 4.

2 TECHNICAL SPECIFICATION 1. Maximum Workg Pressure 150 psi g (10 bar g) 2. Maximum Operatg Temperature 200 F (93 C) 3. EM125 - EM500 Inlet/Outlet connections: 2 NPT 4. EM EM12000 Inlet/Outlet connections: ANSI B16.5 cl 150 RFSO flanges 5. EM125 - EM legs with 3 holes located (as shown) to properly secure unit to a base. 1

3 MODEL A B C D E F G H I J ELEMENT CODE EM125 EM250 EM500 EM1000 EM1200 EM1500 EM2000 EM3000 EM4500 EM6000 EM /8 (517) 20-3/8 (517) 17-1/4 (438) 20-1/2 (521) 25-3/4 (654) 25-3/4 (654) 28-3/4 (730) 28-3/4 (730) 30-1/2 (775) 30-1/2 (775) 34-3/4 (883) 10-7/8 (276) 10-7/8 (276) 10-7/8 (276) 11 (279) 14 (356) 14 (356) 15 (381) 15 (381) 16-3/4 (425) 16-3/4 (425) 18-3/4 (476) 16-1/8 (410) 16 (406) 23-1/2 (597) 23-1/2 (597) 32 (813) 1 (495) 21 (533) 24 (610) 24 (610) 34-1/2 (876) 26-3/4 (679) 32-1/4 (8) 46-5/8 (1184) 46-5/8 (1184) 48 (12) 57-1/2 (1460) 50-1/8 (1273) 59-1/8 (1502) 52-1/8 (1324) 62-1/8 (1578) 63-5/8 (1616) 41-5/8 (1057) 47-1/8 (17) 61-1/2 (1562) 61-1/2 (1562) 67-3/8 (1711) 78-3/8 (91) 74-1/8 (84) 83-1/8 (2111) 79-5/8 (2022) 89-5/8 (2276) 98-1/8 (2492) 43-1/8 (1095) 48-5/8 (1235) 63 (1600) 63 (1600) 71-1/8 (1806) 82-7/8 (2105) 78-5/8 (97) 87-5/8 (2226) 85-1/8 (2162) 95-1/8 (2416) 104-7/8 (2664) 63-1/8 (1603) 74-5/8 (1895) 103 (2616) 103 (2616) 111-1/8 (2823) 132-7/8 (3375) 118-5/8 (3013) 118-5/8 (3013) 128-1/8 (3254) 128-1/8 (3254) 128-1/8 (3254) K125MXL K250MXL K500MXL K1000MXL K1200MXL K1500MXL K2000MXL K3000MXL K4500MXL K6000MXL K8000MXL EM10000 CF CF CF CF CF CF CF CF CF CF K10000MXL EM12000 CF CF CF CF CF CF CF CF CF CF K12000MXL 2

4 INSTALLATION, OPERATION & MAINTENANCE Install ecomist Mist Elimator a suitable location on a level floor. It is recommended that the filter be secured to the floor by usg the anchorg holes on the legs. Dras A suitable dra must be fitted to the bottom of filter downstream of an isolation valve. Automatic dra models should be spected regularly to ensure correct dra operation. Differential Pressure Gauge (DPG) Kit Specifications 1. Maximum operatg pressure: 300 psi g (20.7 bar g). 2. Maximum operatg temperature: 200 F (93 C). 3. Connections: 1/8 NPT Connections *If operatg temperature is greater than 200 F (93 C), remove the DPG Kit. *Option - Remote sensg switch shown on top of DPG 3

5 REPLACEMENT OF FILTER ELEMENT 1. Replace filter element every 5 years or when gauge needle dicates RED. 2. Isolate air (gas) supply and depressurize filter housg by openg valve. 3. Remove nuts and bolts from the body flange allowg bld flange to be removed. 4. Raise top flange with element attached. 5. Unscrew nuts on the underside to the element support plate. 6. Remove element support plate, complete with element. 7. Take this opportunity to clean side of housg and spect for any signs of corrosion. 8. Apply a light coatg of paraff grease to replacement gasket and position. 9. Replace element and support plate. 10. Tighten nuts on the support plate evenly. 11. Inspect all body gasket surfaces and replace if damaged. 12. Tighten nuts and bolts evenly. 13. Slowly repressurize filter housg and check for leaks. AUTOMATIC DRAINS 1. Isolate air (gas) supply by closg valve. 2. Depressurize dra by openg vent valve. 3. Dra can now be removed. 4. Dismantle dra by removg clamp rg - this is achieved by pressg tab on rg while turng. 5. When replacg dra DO NOT pressurize unit unless dra is properly fitted 4

6 MAINTENANCE & EXAMINATION RECORD OWNERSHIP DATA MODEL NO: SERIAL NO:... INSTALLATION DATE:... COMMISSIONING DATE:... COMMISSIONED BY:... (please prt) COMPANY NAME:... TELEPHONE NO:... SERVICE PLAN:... INSPECTION/EXAMINATION REPAIR/MAINTENANCE (IF ANY) Name Signature Date Summary Remarks 5

7 Worldwide Filtration Manufacturg Locations North America Compressed Air Treatment Filtration & Separation/Balston Haverhill, MA Fite Airtek Filtration Airtek/domnick hunter/zander Lancaster, NY Fite Airtek Filtration/Fite Oxford, MI Enge Filtration & Water Purification Modesto, CA Holly Sprgs, MS Beaufort, SC Village Mare Tec. Gardena, CA desalation.parker.com Hydraulic Filtration Hydraulic Filter Metamora, OH Process Filtration domnick hunter Process Filtration Oxnard, CA Europe Compressed Air Treatment domnick hunter Filtration & Separation Gateshead, England +44 (0) Parker Gas Separations Etten-Leur, Netherlands Hiross Zander Padova Busess Unit Padova, Italy Hiross Zander Essen Busess Unit Essen, Germany Enge Filtration & Water Purification Dewsbury, England +44 (0) Research & Development Stuttgart, Germany +49 (0) Hydraulic Filtration Hydraulic Filter Arnhem, Holland Urjala Operation Urjala, Fland Condition Monitorg Center Norfolk, England Process Filtration domnick hunter Process Filtration Birtley, England +44 (0) Asia Pacific Australia Castle Hill, Australia Cha Shanghai, Cha India Navi Mumbai, India Japan Tokyo, Japan Korea Hwaseon-City Sgapore Jurong Town, Sgapore Thailand Bangkok, Thailand Lat America Parker Comercio Ltda. Filtration Division Sao Paulo, Brazil Pan American Division Miami, FL Africa Aeroport Kempton Park, South Africa Parker Hannif Corporation. Product names are trademarks or registered trademarks of their respective companies Catalog: Rev /2012

Eaton Filtration, LLC

Eaton Filtration, LLC 900 Fairmount Avenue, Elizabeth, NJ 07207 Phone: 908-787-1000 Fax: 908-351-7893 E-Mail: filtration@eaton.com Web: www.filtration.eaton.com Installation, Operation & Service Manual