HEAVY-DUTY 16 ga, T-304 S/S 20" 20 1/2" OR SPECIFY 1 1/2" 3/4"

Transcription

1 DTS DISH TABLES HEAVY-DUTY 16 ga, T-304 S/S DTS- -LT MODEL 2" 20" DTS-024-LT 24 DTS-036-LT 36 6" DTS-048-LT 48 DTS-054-LT 54 30" 20" 20 OR SPECIFY DTS-060-LT 60 DTS-072-LT 72 DTS-084-LT 84 DTS-108-LT 108 Ø3 8" 10" Ø1 1/8" 2 8" 3/4" 36 34" 15 1/4" 39" 44" 16 gauge, type 304 stainless steel -Work surface -Backsplash -Legs & rails -Sink Bowl Type 304 stainless -Basket drain MECHANICAL Backsplash is 10 tall with a 2 return. Tile edge is 1 tall with pre-drilled mounting holes, ¼ diameter. Faucet holes are 11/8 diameter on 8 centers. Table legs are 15 8 diameter with adjustable bullet feet. Sink compartment is 8 deep. Drain opening is 3½, recessed. Basket drain is 1½ IPS. Supply is ½, hot and cold. Sink bowl is custom fabricated, not drawn. Coved compartment is ¾ radius, both horizontal and vertical. Sanitary roll is 1½ wide by 2½ tall. Tile edge is provided with pre-drilled mounting holes to securely fasten sink to the wall. All seams are TIG welded and ground to a smooth #4 satin finish. Custom configurations are available. NSF approved. Lifetime warranty. Proudly made in the USA. Included: WA-350 basket drain DTS-XXX-LT ACCESSORIES FR-128 Wall mount pre-rinse spray FA-200 Articulating swing arm FA-500 Add-a-faucet to change product without [5]-1

2 DTC DISH TABLES HEAVY-DUTY 16 ga, T-304 S/S DTC- -RT MODEL DTC-024-RT 24 DTC-036-RT 36 DTC-048-RT 48 DTC-054-RT 54 DTC-060-RT 60 DTC-072-RT 72 DTC-084-RT 84 DTC-108-RT 108 6" 20 OR SPECIFY 2" 30" 2 10" 3/4" 44" 34" gauge, type 304 stainless steel -Work surface -Backsplash -Legs & rails Type 304 stainless MECHANICAL Backsplash is 10 tall with a 2 return. Tile edge is 1 tall with pre-drilled mounting holes, ¼ diameter. Table legs are 15 8 diameter with adjustable bullet feet. Sanitary roll is 1½ wide by 2½ tall. Tile edge is provided with pre-drilled mounting holes to securely fasten sink to the wall. All seams are TIG welded and ground to a smooth #4 satin finish. Custom configurations are available. NSF approved. Lifetime warranty. Proudly made in the USA. to change product without [5]-2 DTC-XXX-RT

3 DTC DISH TABLES HEAVY-DUTY 16 ga, T-304 S/S DTC- -LT 30" 2" 6" 20 OR SPECIFY MODEL DTC-024-LT 24 DTC-036-LT 36 DTC-048-LT 48 DTC-054-LT 54 DTC-060-LT 60 DTC-072-LT 72 DTC-084-LT 84 DTC-108-LT " 2 3/4" 36 34" 44" 16 gauge, type 304 stainless steel -Work surface -Backsplash -Legs & rails Type 304 stainless MECHANICAL Backsplash is 10 tall with a 2 return. Tile edge is 1 tall with pre-drilled mounting holes, ¼ diameter. Table legs are 15 8 diameter with adjustable bullet feet. Sanitary roll is 1½ wide by 2½ tall. Tile edge is provided with pre-drilled mounting holes to securely fasten sink to the wall. All seams are TIG welded and ground to a smooth #4 satin finish. Custom configurations are available. NSF approved. Lifetime warranty. Proudly made in the USA. to change product without DTC-XXX-LT [5]-3

4 DTS DISH TABLES HEAVY-DUTY 16 ga, T-304 S/S DTS- -RT MODEL DTS-024-RT 24 DTS-036-RT 36 20" 2" DTS-048-RT 48 DTS-054-RT 54 6" DTS-060-RT 60 DTS-072-RT 72 DTS-084-RT OR SPECIFY 20" 30" DTS-108-RT 108 Ø3 8" 2 Ø1 1/8" 10" 3/4" 8" 44" 39" 15 1/4" 34" gauge, type 304 stainless steel -Work surface -Backsplash -Legs & rails -Sink Bowl Type 304 stainless -Basket drain MECHANICAL [5]-4 Backsplash is 10 tall with a 2 return. Tile edge is 1 tall with pre-drilled mounting holes, ¼ diameter. Faucet holes are 11/8 diameter on 8 centers. Table legs are 15 8 diameter with adjustable bullet feet. Sink compartment is 8 deep. Drain opening is 3½, recessed. Basket drain is 1½ IPS. Supply is ½, hot and cold. Sink bowl is custom fabricated, not drawn. Coved compartment is ¾ radius, both horizontal and vertical. Sanitary roll is 1½ wide by 2½ tall. Tile edge is provided with pre-drilled mounting holes to securely fasten sink to the wall. All seams are TIG welded and ground to a smooth #4 satin finish. Custom configurations are available. NSF approved. Lifetime warranty. Proudly made in the USA. Included: WA-350 basket drain DTS-XXX-RT ACCESSORIES FR-128 Wall mount pre-rinse spray FA-200 Articulating swing arm FA-500 Add-a-faucet to change product without

5 TRF WORK TABLES HEAVY DUTY 16 ga, T-304 S/S TRF- MODEL WD TRF TRF TRF TRF TRF TRF WD TRF TRF TRF TRF TURNBACK TRF TRF TRF /4" TRF TRF TRF TRF " TRF TRF TRF TRF TRF TRF TRF gauge, type 304 stainless steel -Work surface -Legs & rails 18 gauge, type 304 stainless steel -Undershelf (TUF & TUB models) Type 304 stainless 12 gauge galvanized steel -Table channels Flat backsplash is 1¾ tall (TRB & TUB models). Front face features a ½ turn back to conceal exposed edge. Undershelves are easily removable to aid in cleaning area below (TUF & TUB models). Front to back rails are welded and left to right is adjustable and removable. Stainless feet are adjustable bullet type. 12 gauge channel structure provides maximum stability. Work surface is 34 above finished floor. Table legs are 15 8 diameter round tubing. Cross rails are 1¼ diameter. Custom configurations are available. NSF approved. Lifetime warranty. Proudly made in the USA. TRF-XXX to change product without [5]-5

6 TUF WORK TABLES HEAVY DUTY 16 ga, T-304 S/S TUF- MODEL WD TUF TUF TUF TUF TUF TUF SHELVES WD TUF TUF TUF TUF TURNBACK TUF TUF TUF /4" TUF TUF TUF TUF " 25" TUF TUF /4" TUF TUF TUF TUF TUF gauge, type 304 stainless steel -Work surface -Legs & rails 18 gauge, type 304 stainless steel -Undershelf (TUF & TUB models) Type 304 stainless 12 gauge galvanized steel -Table channels [5]-6 Flat backsplash is 1¾ tall (TRB & TUB models). Front face features a ½ turn back to conceal exposed edge. Undershelves are easily removable to aid in cleaning area below (TUF & TUB models). Front to back rails are welded and left to right is adjustable and removable. Stainless feet are adjustable bullet type. 12 gauge channel structure provides maximum stability. Work surface is 34 above finished floor. Table legs are 15 8 diameter round tubing. Cross rails are 1¼ diameter. Custom configurations are available. NSF approved. Lifetime warranty. Proudly made in the USA. TUF-XXX to change product without

7 TRB WORK TABLES HEAVY DUTY 16 ga, T-304 S/S TRB- MODEL WD TRB TRB TRB TRB TRB TRB WD TRB TRB TRB TRB TURNBACK TRB TRB TRB /4" TRB TRB TRB TRB " TRB TRB TRB TRB TRB TRB TRB gauge, type 304 stainless steel -Work surface -Legs & rails 18 gauge, type 304 stainless steel -Undershelf (TUF & TUB models) Type 304 stainless 12 gauge galvanized steel -Table channels Flat backsplash is 1¾ tall (TRB & TUB models). Front face features a ½ turn back to conceal exposed edge. Undershelves are easily removable to aid in cleaning area below (TUF & TUB models). Front to back rails are welded and left to right is adjustable and removable. Stainless feet are adjustable bullet type. 12 gauge channel structure provides maximum stability. Work surface is 34 above finished floor. Table legs are 15 8 diameter round tubing. Cross rails are 1¼ diameter. Custom configurations are available. NSF approved. Lifetime warranty. Proudly made in the USA. TRB-XXX to change product without [5]-7

8 TUB WORK TABLES HEAVY DUTY 16 ga, T-304 S/S TUB- MODEL WD TUB TUB TUB TUB TUB TUB TUB SHELVES WD TUB TUB TUB TUB TURNBACK TUB TUB TUB /4" TUB TUB TUB " 25" 9 1/4" TUB TUB TUB TUB TUB TUB TUB gauge, type 304 stainless steel -Work surface -Legs & rails 18 gauge, type 304 stainless steel -Undershelf (TUF & TUB models) Type 304 stainless 12 gauge galvanized steel -Table channels [5]-8 Flat backsplash is 1¾ tall (TRB & TUB models). Front face features a ½ turn back to conceal exposed edge. Undershelves are easily removable to aid in cleaning area below (TUF & TUB models). Front to back rails are welded and left to right is adjustable and removable. Stainless feet are adjustable bullet type. 12 gauge channel structure provides maximum stability. Work surface is 34 above finished floor. Table legs are 15 8 diameter round tubing. Cross rails are 1¼ diameter. Custom configurations are available. NSF approved. Lifetime warranty. Proudly made in the USA. TUB-XXX to change product without

9 CTE/S COUNTER TOPS HEAVY-DUTY 16 ga, T-304 S/S CT_- - CTE CTS CTE CTS CTE CTS CTE CTS CTE CTS CTE CTS CTE CTS CTE CTS CTE CTS RIGHT LEFT E D S E -EE -ED -ES D -DE -DD -DS S -SE -SD -SS (E) RAW EDGE (D) TURN DOWN (S) END SPLASH CTE WIDTH SECTION CTS WIDTH SECTION 25" 25" 1" 5" LENGTH SECTIONS (END OPTIONS) -EE -ED -ES -DE -DD -DS -SE -SD -SS CTX-XXX-XX [5]-9