3M Water Filtration Products High Flow Series. Recipe. Quality. Water

Transcription

1 3M Water Filtration Products High Flow Series Recipe Quality Water

2 3M Water Filtration Products High Flow Series can meet the filtration needs of an entire foodservice establishment or address specific applications one at a time. A one-cartridge High Flow system with revolutionary Integrated Membrane Pre-Activated Carbon Technology ( IMPACT ) media delivers Recipe Quality Water at a flow rate of up to 5 gallons per minute (18.9 lpm) and accomplishes what was previously the job of a three- or four-cartridge system. No activation steps are required, and, for most water, no pre-filter is needed. Whether your foodservice application is cold beverages, ice machines, coffee, tea, espresso, or any combination, a 3M Water Filtration Products High Flow Series system is the one you should count on for unprecedented cyst and bacteria reduction, sediment holding, chlorine taste and odor reduction, and scale inhibition. Economy The High Flow Series Provides Single-cartridge flow rates and capacities previously available only with three- or four-cartridge systems. Up to 12 month cartridge life for cartridges with Integrated Membrane Pre-Activated Carbon Technology ( IMPACT ) media. No need for a separate prefilter. Ease Fast and easy cartridge change-outs with SQC Sanitary Quick Change encapsulated cartridge design. No requirement for pre-activation of the media. Direct or easily-adaptable connections to existing plumbing lines with NPT horizontal inlet and outlet ports. Certification FDA CFR-21 and/or NSF Standard 42 compliant materials. Certification to NSF Standard 53 for cyst reduction and reduction of percent of water-borne bacteria* when using 3M Water Filtration Products nylon-membrane cartridge filters. No exposure to contaminated media. Performance Recipe Quality Water for all commercial foodservice applications, including cold beverages, ice and all brewed beverages. Combined sediment, cyst, water-borne bacteria and scale reduction with chlorine taste and odor reduction in a single cartridge from our innovative Integrated Membrane Pre-Activated Carbon Technology ( IMPACT ) media. Reduction of sediment and abrasive hard particles helps to extend the life of pumps, valves, o-rings, and seals. Compact manifold systems to simultaneously service multiple applications. *Measured with E.coli. 2

3 Table of Contents About CUNO/3M M Water Filtration Products in the Foodservice Arena Integrated Membrane Pre-Activated Carbon Technology ( IMPACT ) Multiple-Equipment Combination Applications Cold Beverage Applications Ice Applications Hot Beverage Applications Scale Reduction Applications Contact information... Back Cover About CUNO A Market Leading Filtration Company CUNO is a leader in the design, manufacture, and marketing of a comprehensive line of filtration products for the separation, clarification, and purification of fluids and gasses. Its proprietary products are used in drinking water, healthcare, and industrial markets. CUNO operates manufacturing facilities and sales offices throughout the world. About 3M A Global, Diversified Technology Company Every day, 3M people find new ways to make amazing things happen. Wherever they are, whatever they do, the company s customers know they can rely on 3M to help make their lives better. 3M s brands include Scotch, Post-it, Scotchgard, Thinsulate, Scotch-Brite, Filtrete, Command and Vikuiti. Serving customers in more than 200 countries around the world, the company s 67,000 people use their expertise, technologies and global strength to lead in major markets including consumer and office; display and graphics; electronics and telecommunications; safety, security and protection services; health care; industrial and transportation. 3

4 With revolutionary Integrated Membrane Pre-Activated Carbon Technology ( IMPACT ) media for superior throughput and cartridge life, the 3M Water Filtration Products High Flow Series of commercial foodservice products offers simple, effective and easy-to-install solutions that meet the volume, water clarity and maintenance expectations of restaurant owners, chain, fast food and convenience store operators, supermarkets, cafeterias, and institutions. For cold, hot, and specialty beverages, ice, or any combination of applications, 3M Water Filtration Products has an option for you including cyst and bacteria-reduction and filters especially constructed for higher turbidity waters. 3M Water Filtration Products can help you lower capital and operating costs for your foodservice operation. For central systems serving multiple applications, go to pages 8 and 9 For systems dedicated to the improved taste, appearance, and consistency of cold beverages, go to pages 10 and 11. For scale reduction applications, go to page 15. Steamer 4

5 For systems dedicated to great tasting coffee and tea, go to pages 14 and 15. For systems dedicated to cleaner, consistent, great-tasting ice, go to pages 12 and 13. For systems dedicated to great tasting espresso and iced tea, go to pages 14 and 15. 5

6 3M Water Filtration Products High Flow Series uses revolutionary Integrated Membrane Pre-Activated Carbon Technology ( IMPACT ) for superior cartridge life and economy. A single filter can accomplish what was previously the job of a three- or four-cartridge system. The IMPACT media package combines a patented pharmaceutical-grade microporous membrane and a pre-activated carbon block in a single cartridge to dramatically reduce pressure drop and practically eliminate the need for pre-filtration. The integrated membrane provides superior sediment holding capabilities while reducing Cryptosporidium and Giardia cysts 1 and over percent of all water-borne bacteria. 2 The polycarbon block releases virtually no carbon fines. Pre-activation of the carbon media is not required. Over 99.99% of E.coli bacteria are reduced by the nylon pharmaceutical-grade membrane. Reduce scale formation, cysts, bacteria, sediment, and chlorine taste and odor with convenience and superior performance. Stop wasting time and money on messy sump systems. By creating a single cartridge system that delivers over 864,000 8-oz cups of coffee, 432, oz soft drinks (in a 22-oz cup), or 216,000 pounds of ice (25 gallons at 100 lbs of ice) at a flow of up to 5 gallons per minute (gpm), 3M Water Filtration Products deliver Recipe Quality Water while reducing filtration costs. Two-Zone Membrane Large particles are captured in the top zone and smaller particles in the bottom zone of the graded density microporous nylon membrane, providing superior cartridge sediment-holding capacity. FLOW Enhanced High Flow HF90 Cartridge Bacteria Membrane Competitor Surface Area Enhanced High Flow filters have nearly 6 times the surface area for improved sediment filtration, reduced pressure drop and longer cartridge life. Cartridge Gram Life 5.0 Cartridge Throughput New Enhanced High Flow cartridges with Integrated Membrane Pre- Activated Carbon Technology ( IMPACT ) show higher throughputs and longer lifetimes. ln side-to-side tests conducted with a surrogate plugging agent to a 25% loss in flow rate, a single HF90 cartridge averaged over 4.5 times the sediment holding capacity of competitive cartridges. High Flow High Flow High Flow 1 NSF Standard 53 2 Measured with E.coli. 6

7 Chlorine Capacities The high chlorine taste and odor capacities* for High Flow cartridge filters with Integrated Membrane Pre-Activated Carbon Technology ( IMPACT ) help assure that a single HF90 cartridge out-performs a four-cartridge system from our competitor**. x1,000 x1,000 * at an average of 96+% reduction ** 4 Competitor cartridges each with 9,000 Gal. (34,000 Lit.) chlorine capacity Nylon-Membrane Bacterial Reduction Bacteria Percent Reduction Achieved E. coli > P.fluorescens > Testing results for cartridge filters with 10 square feet (0.93 square meters) of pleated 3M Water Filtration Products High Flow Series nylon membrane challenged with 10 liters of water containing organisms at >10 5 cfu/ml. Cartridge Cutaway Rugged polypropylene design. Pleated membrane design helps provide cyst and bacteria protection and superior sediment holding capabilities with minimal pressure drop. Carbon block technology has more than four times the chlorine taste and odor capacity of competitor. Also features bacteria inhibition agent for improved hygiene. New enhanced pleated membrane has 6 times the surface area of competitor (see Surface Area diagram). New enhanced cartridges feature a 5 micron pre-filter wrap. 7

8 High Flow Systems for Multiple Applications A central system is typically more economical and easier to install and service than dedicated systems. For Recipe Quality Water to several pieces of equipment that require different water characteristics, use High Flow Dual Port and Dual Flow Manifolds. Integrated Membrane Pre-Activated Carbon Technology ( IMPACT ) systems offer cyst and bacteria reduction. Reduced scale build-up on heating surfaces for reduced maintenance costs and higher efficiency. Dual Port Systems Two separate streams exit the High Flow system manifold providing reduced sediment and chlorine taste and odor. One stream supplies cold-beverage dispensers. Proportionately-dosed scale-inhibition media is added to the second stream from a dedicated HF8-S cartridge to reduce the ability of calcium and magnesium to precipitate as hard scale on the evaporator plates of an ice machine and/or the heating coils of a coffee brewer. Dual Port and Dual Flow Systems are engineered for high flow rates and high capacities to supply the benefits of individual equipment filtration from a central location. Dual Flow Systems Two separate streams exit the High-Flow manifold. DP290 The first stream supplies cold beverage applications and is filtered for reduced sediment, chlorine taste and odor, chloramine and carries no scale-inhibition media. The second stream carries scale-inhibition media and is filtered to reduce sediment, providing the ice machine with chlorinated water for biofilm control. DF290-CL 8

9 Reduced sediment and scale on ice machine evaporator plates decreases maintenance costs. Dual-Port Systems reduce chlorine taste and odor; Dual-Flow Systems inhibit biofilm growth by allowing chlorinated water to flow to the ice machine. Both Dual-Port and Dual-Flow Systems improve the taste, appearance, and consistency of cold beverages. High Flow Dual-Port Sizing System Model* Part of Cartridges Flow Rate gal/min (lit/min) DP (18.9) DP (37.8) DP (57.8) High Flow Dual-Flow Sizing System Model* Part of Beverage Cartridges of Ice Machine Cartridges Beverage Flow gal/min (lit/min) Ice-Machine Flow gal/min (lit/min) DF290-CL** (10.2) 5 (18.9) * System offers cyst and bacteria reduction with Integrated Membrane Pre-Activated Carbon Technology ( IMPACT ) media ** The carbon in DF290-CL reduces chloramine and chlorine 9

10 Cold Beverage Water Filtration with High Flow Systems Cold beverages are often the most profitable part of convenience stores, restaurants and quick-service operations. For these high-volume cold beverage applications, High Flow filters deliver enough Recipe Quality Water to make more than 432,000 soft drinks (16 oz. soft drinks in 22 oz. cups) with a single cartridge. High Flow cartridge filters deliver the improved performance of Integrated Membrane Pre-Activated Carbon Technology ( IMPACT ) media. A single cartridge High Flow system replaces three- or four-cartridge manifolds, lowering capital and operating costs. For Beverage Water, High Flow Filtration Provides: Reduced sediment and chlorine taste and odor for cold beverage quality, consistency, and customer satisfaction. Reduced sediment and abrasive hard particles to help extend the life of pumps, valves, o-rings, and seals. Reduced numbers of microorganisms, including Cryptosporidium and Giardia cysts (per NSF Standard 53) and water-borne bacteria such as E.coli. (Depends upon model) Virtually no need for an additional pre-filter with High Flow Systems. 10

11 Excess sediment can cause abrasion and short life on pumps, seals, o-rings and valves High total dissolved solids (TDS) can cause cloudy and unappealing beverages Larger Systems Dual and Triple-Manifold systems are available for larger flow requirements. Please inquire. Sizing Excess chlorine can cause unpleasant tasting beverages System Part Model Micron Flow Rates gal/ min Capacity Carbonator lit/min Dispensers Gallons Liters BEV Single 14,000 53,000 BEV Single 12,600 48,000 BEV Single High Flow 25,000 95,000 BEV Single High Flow 25,000 95,000 BEV Double/Two 35, ,000 BEV Double/Two 35, ,000 BEV Up to 5 gal/min 54, ,000 BEV Up to 5 gal/min 54, ,000 Repl. Cart. HF HF HF HF HF HF HF HF All systems deliver reduction of sediment and chlorine taste & odor BEV130/135 contain carbon-block media only BEV140, BEV160, BEV190 systems include Integrated Membrane Pre-Activated Carbon Technology ( IMPACT ) media for cyst and bacteria reduction. For higher turbidity waters, the media in BEV135, BEV145, BEV165 and BEV195 systems are specially designed to provide cartridge and system life, but not cyst or bacteria reduction 11

12 High Flow Systems Ice Filtration Systems The ice machine is the backbone of the foodservice industry. Whether it s serving drinks or keeping food fresh, large amounts of ice are key to quality service. If you re looking for cleaner, clearer, consistently, great tasting ice with reduced Cryptosporidium and Giardia cysts (per NSF Standard 53) and water-borne bacteria such as E.coli look no further than 3M Water Filtration Products High Flow Series Systems High Flow Filters for Ice Offer: Reduced sediment and chlorine taste and odor for cleaner ice taste, clarity, consistency and customer satisfaction. Reduced chlorine taste and odor helps prevent the effects of chlorine corrosion of metal surfaces. Reduced sediment and abrasive hard particles help extend the life of pumps, valves, o-rings and seals. Reduced downtime and service calls with the built-in delivery of a scale inhibitor to reduce the ability of calcium and magnesium to precipitate on the evaporator plates as hard scale. Integrated Membrane Pre-Activated Carbon Technology ( IMPACT ) media packages in Models ICE140, 160 and 190 result in the reduction of microorganisms, including Cryptosporidium and Giardia cysts (per NSF Standard 53) and water-borne bacteria such as E.coli. Membrane-cartridge challenge testing with P.fluorescence and E.coli demonstrated over 99.99% reductions of both organisms. No need for a separate pre-filter. Sizing Flow Rates High Flow Low Flow Capacity System Flakers Part Cubers Cubers Model Micron Pounds (Kg) gal/min lit/min Pounds Pounds (Kg) Gallons Liters To (Kg) To To ICE120-S (91) (340) ICE125-S (91) (340) ICE140-S ,000 (272) (454) ICE145-S ,000 (272) (454) ICE160-S ,000 1,450 (454) (658) ICE165-S ,000 1,450 (454) (658) ICE190-S >1,000 >1,450 (454) (658) ICE195-S >1,000 >1,450 (454) (658) ICE260-S ,400 3,000 (1089) (1,361) ICE265-S ,400 3,000 (1089) (1,361) 12 1,200 (544) 9,000 34,000 1,200 (544) 10,000 38,000 1,800 (817) 25,000 95,000 1,800 (817) 25,000 95,000 2,400 (1,089) 35, ,000 2,400 (1,089) 35, ,000 >2,400 (1,089) 54, ,000 >2,400 (1,089) 54, ,000 4,800 (2,177) 70, ,000 4,800 (2,177) 70, ,000 Repl. Cart. HF20-S HF25-S HF40-S HF45-S HF60-S HF65-S HF90-S HF95-S (2) HF60-S (2) HF65-S ICE190-S

13 All systems deliver reduction of sediment and chlorine taste & odor ICE120-S and ICE125-S contain carbon-block media only ICE140-S, ICE160-S, ICE190-S and ICE260-S systems include Integrated Membrane Pre-Activated Carbon Technology ( IMPACT ) media for cyst and bacteria reduction. For higher turbidity waters, the media in ICE145-S, ICE165-S, ICE190-S and ICE260-S systems are specially designed to provide cartridge and system life, but not cyst or bacteria reduction. Excess sediment particles can clog distribution tubes and solenoid valves. Larger Systems Dual and Triple-Manifold systems are available for larger flow requirements. Please inquire. Scale build-up on evaporator plates can significantly increase maintenance costs. Excess chlorine residual can cause chlorine smell and corrosion in ice bins. ICE260-S 13

14 Dedicated Systems for Coffee, Tea and Espresso 3M Water Filtration Products High Flow Series filters for hot beverage applications reduce excess chlorine taste and odor, sediment and organic residuals that cause bitter tasting coffee, espresso or tea and clog spray heads. If not filtered these residuals can wreak havoc on your equipment and lead to expensive replacement costs. When scale build-up is an issue, High Flow BREW Systems add scale inhibitors to help prevent the precipitation of calcium and magnesium that can significantly decrease efficiency and increase maintenance costs. High Flow ESP and ScaleGARD Pro (SGP) systems reduce calcium and magnesium ions by ion exchange for crystal clear iced tea and for perfect bean extraction for espresso and espresso-based beverages. Turn to 3M Water Filtration Products for superior flavor, consistency and customer satisfaction. Systems For Coffee, Tea And Espresso: BREW systems add scale inhibitors for improved scale reduction. ESP and SGP systems soften water for espresso without the need for a drain, electrical connections, or salt regeneration. Incorporate a valve-in-head design and Sanitary Quick Change cartridge convenience for fast and easy cartridge change-outs. Inlet water is turned off automatically when the cartridge is replaced. SCALE ScaleGard SF165 helps protect steamers, coffee brewers, and ice machines from the effects of scale formation at temperatures up to and exceeding 200ºF (93ºC). The SF18-S scale feeder carefully meters the right proportion of high-temperature scale inhibitor into water filtered through an 3M Water Filtration Products High Flow Series cartridge with Integrated Membrane Pre-Activated Carbon Technology ( IMPACT ) media. The SF18-S scale feeder may be purchased separately. SF165 14

15 Systems And Sizing Softening Cartridge Systems For Espresso Flow Rate Capacity Resin Part Model (grains of Type gpm lpm hardness) SAC 1 ESP114-T ESP124-T ,100 WAC 2 SGP124BN-T ,440 WAC SGP165BN-T ,470 WAC SGP195BN-T ,800 Inlet/outlet fittings are 3/8-inch FNPT 1 Strong-acid (SAC) ion exchange cartridges reduce calcium and magnesium ions in the brewing water, replacing them with sodium ions for better-tasting espresso Scale build-up on sensors and heating coils can significantly increase maintenance costs Excess sediment can clog spray head in the brew basket Excess chlorine and organic residual can cause bitter-tasting beverages 2 Weak-acid (WAC) ion-exchange cartridges replace positive ions (calcium and magnesium and others) in the brewing water with hydrogen ions. A 25% bypass is built-in. 3 To calculate capacities in gallons, divide the grain capacity by the hardness of the inlet water in grains per gallon or liter. WAC capacities are approximate, and throughputs need to be adjusted higher to account for the 25% bypass. Systems And Sizing Coffee And Tea 1 Flow Rates Capacity of of System Part 1/2 Gal 12 oz. Model Micron gal/min lit/min Gallons Liters (2 liter) (356 ml) Pots Cups of Tea BREW105-MS ,500 5,700 3,000 16,000 BREW110-MS ,500 13,200 7,000 37,000 BREW115-MS ,500 13,200 7,000 37,000 BREW120-MS ,000 34,000 18,000 96,000 BREW125-MS ,000 38,000 20, ,000 BREW130-MS ,000 53,000 28, ,000 BREW135-MS ,600 48,000 25, ,000 Repl. Cart. HF05-MS HF10-MS HF15-MS HF20-MS HF25-MS HF30-MS HF35-MS Systems And Sizing Scale Reduction Model Part Capacity Flow Rate gal lit gpm lpm Sizing SF , , Coffee Brewers, Ice Machines, and Steamers to SF18-S , ,000 to 5 to 18.7 Demand flow rates of 3.34 gpm (12.6 lpm) Periodic acid de-liming is recommended for steamer applications 15

16 Recipe Quality Water Visit for the claims associated with products that are NSF listed. FOR MORE INFORMATION on the full line of CUNO filtration products log on to or call CUNO (2866). CUNO Incorporated a 3M Company 400 Research Parkway Meriden, CT U.S.A. (888) 218-CUNO (203) Fax (230) Scotch, Post-it, Scotchgard, Thinsulate, Scotch-Brite, Filtrete, Command and Vikuiti are trademarks of 3M Company. CUNO, ScaleGARD, and Recipe Quality Water are trademarks of 3M Company used under license. 3M is a trademark of 3M Company. NSF is a trademark of NSF International. 3M All rights reserved LITFS