Qty: B30 1,2. 1B20 1,2 408lm/4.7W per foot. 1B25 1,2 540lm/6.3W per foot. 1B lm/8.5W per foot K ft.

Transcription

1 Date: Customer: Project: Type: Qty: M100 Order Code: L L10 Series L10 M100 Light Engine 1B45 1,2,3 887lm/10.9W per foot 1B40 1,2,3 802lm/9.7W per foot 1B lm/8.5W per foot 1B30 1,2 603lm/7.1W per foot 1B25 1,2 540lm/6.3W per foot 1B20 1,2 408lm/4.7W per foot 1 Values calculated from a 4 using LW Shielding and DIM driver. For additional information please see page 2. 2 Available starting at 2 and up. 3 Not available with Lutron. CCT K 3000K K K Shielding LW MI LED Optimized Clear Lens with white lens Microprism Mounting C S RS W 4 F 5 Cable Swivel Stem Rigid Stem Wall Mount Surface Mount 4 Consult factory for lengths under 2 5 Over 8 supplied with 2 or more housings that are joined in the field. Nominal Fixture Length 01* 1 ft ft ft ft ft ft ft ft ft ft ft. *1 fixture only available with 1 B35 light engine Individual fixtures, Runs and Configurations are supplied in nominal lengths to ensure full, even, illumination. See pages 2 thru 6 for additional details ft. XX Runs (over 12 ) & Configurations, round up to the nearest foot and replace the xx with the # (i.e. 13=13 nominal) Finish Voltage WH White Volt BK Black Volt BL Semi-Matte Black SV Silver 347 UNV 120 thru Volt 50/60hz capable (consult factory) SP Specify Premium Color Custom colors are available, Please consult factory Driver DIM 6 DML 6,7 0-10V (Linear) DM 6,7 eldoled SOLOdrive 0-10V (Linear) eldoled SOLOdrive 0-10V (Logarithmic) DMD 6,7 eldoled DALI (Logarithmic) DC2 6,7,8 Lutron 2-Wire DC3 6,7 Lutron 3-Wire DCE 6,7 Lutron Eco-System DC5 Lutron 5-Series (consult factory) SR 6,7,9 Philips Xitanium SR (DALI) 6 See page 7 for full details 7 Not available for 1 length or with 1B45 or 1B V only 9 For use with E and P sensors only Fixture Options DL 10 Damp Location Rated FS 10 In-line Fuse SS 10 Separate Switching xxxx 11 LED MR16 downlight 10 See page 8 for full details and restrictions 11 Consult factory Sensor Options 12, 13 xe Enlighted Replace x with quantity 12, 13 xp1 Philips Daylight xp2 Philips Occ/Vac 12, 13 xp3 Philips Occ/Vac/ Daylight 12, 14 12, 14 xs1 xs2 Sensor Switch Sensor Switch Daylight Occ/Vac 12, 14 xs3 Sensor Switch Occ/Vac/ Daylight xsn nlight enabled (consult factory) 12 Minimum length 2. See page 9 for full details and restrictions 13 For use with SR driver only 14 For use with DIM driver only Emergency Options EC 15 Emergency Circuit Wiring EMR EM Remote Micro Integral EM Inverter Battery Pack (consult factory) (consult factory) 15 See page 8 for full details and restrictions Configuration IL90 16 Lit Horizontal Options 90 Corner V90 16 Lit Inverted 90 Corner IT90 16 Lit T section IX90 16 Lit X section 16 See page 10 for full details and restrictions 5YEAR LED WARRANTY ARRA Compliant ADA Compliant Page 1 of 12

2 4 (101mm) 3 11 /16 (94mm) 3 15 /16 (100mm) LW lens shown for reference Construction: Electrical/Performance: Luminaire Finish: Housing - Continuous, low copper 6063-T6 extruded aluminum profile with aluminum endcaps, available as Individual fixtures (up to 12 ) or Runs. Geartray - Low copper 6063-T6 extruded aluminum profile Shielding - Extruded, impact resistant acrylic lens: - LED optimized white lens (LW) - Clear lens with microprism (MI) Mounting(s) - 1/16 Aircraft Cable, Ø5/8 Swivel or Rigid Steel Stem, Wall Bracket, Surface mounting (see pages 3 thru 6 for details). ** Cable, Stem and Wall mountings may not be symmetrical for Runs and Configurations due to the use of modular housing lengths. If symmetrical suspensions are required please consult the factory. Standard Luminaire lengths - All standard luminaires are supplied in nominal lengths to ensure full, even, illumination. Runs and Configurations are available in approximately 1/4 increments starting at the nominal 12 fixture length. ** Individual luminaires are not joinable in the field. Exact length luminaires - Individual luminaires, Runs, and Configuration are available in exact lengths to meet your project needs. Please consult factory with your requirements. ** Lens luminance may soften at the very ends of the straight sections for exact length luminaires. L10 Joiner(s) - Runs and Configurations are supplied in multiple housing that are joined together in the field using the supplied L10 Joiner System. This allows ease of installation and ensures a uniform appearance (see page 8 for detail). Weight: 3.2 lb. per foot. LED Light Engine - Brand-name mid-power LEDs create a high efficiency LED light engine able to provide a lumen maintenance of 96% at 25,000 hours and 93% at 60,000 25ºC per TM-21 reports. Reported L70 greater than 60,000 hours. Delivered Lumens - Due to LED manufacturer s tolerances the listed output has a ±5% tolerance. For outputs based on different shielding or CCT please see photometry section at the end. CCT - Available in 2700K, 3000K, 3500K and 4000K, tolerance within a 3-step MacAdam ellipse. CRI - Min. 90. All Drivers - High efficiency, constant current, soft start, Electronic Class 2 with a PFC>0.90. For more detailed information on the available drivers please see page 7. Sensors - Selux offers a variety of integral sensor options. For details and specifications, please refer to page 9. Thermal Performance: Ambient Operating Temperature - Luminaires suitable for maximum ambient temperature of 35 C (95 F) for all drivers. Luminaires are suitable for minimum ambient temperatures of: -40ºC (-40ºF) for DIM, DM, DML, and DMD drivers. -20ºC (-4ºF) for SR drivers. 0ºC (32ºF) for DC2, DC3, and DCE drivers. Powder Coat - All Selux luminaries are finished in high quality polyester powder coating in our Tiger Drylac certified facility and are tested in accordance with test specifications for coatings from ASTM and PCI. All products undergo a five stage intensive pretreatment process where product is thoroughly cleaned, phosphated, and sealed. Selux powder coated products provide excellent salt and humidity resistance as well as ultra violet resistance for color retention. Standard interior colors are White (WH), Black (BK), Semi-Matte Black (BL), and Silver (SV). Selux premium colors (SP) are available, please specify from your Selux color selection guide. Warranty: 5 Year Limited LED Luminaire Warranty - Selux offers a 5 Year Limited Warranty to the original purchaser that the M100 series LED luminaire shall be free from defects in material and workmanship for up to five (5) years from date of shipment. This limited warranty covers the LED driver and LED light engine when installed according to Selux instructions and operated within the Ambient Temperature. For additional details and exclusions, see Selux Terms and Condition of Sale. Certifications and Compliance: NRTL - For Dry and Damp location (I.E. culus) ADA Compliant ARRA Compliant RoHS Compliant Page 2 of 12

3 Cable Mounting (C) Cable Mounting (C) Nominal Length A Housing Length Cable Mounting (C) - Dimensions * B (Ref.) End Suspensions C Mid. Suspension D Feed Location Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM 01 (1 ft.) 1' - 5/16" 313 0' - 2 1/8" 54 0' - 8 1/8" 206 0' - 1 1/8" (2 ft.) 2' - 1/4" 616 0' - 2 1/8" 54 1' - 8" 508 0' - 1 1/8" (3 ft.) 3' - 5/16" 923 0' - 3 1/8" 79 2' - 6 1/8" 764 0' - 2 1/8" (4 ft.) 3' /16" ' - 3 1/8" 79 3' - 5 3/16" ' - 2 1/8" Ø 1/16 Aircraft Cable with chrome gripper for easy adjustment (48 max. from ceiling to luminaire). 05 (5 ft.) 4' /16" ' - 3 1/8" 79 4' - 5 3/16" ' - 2 1/8" (6 ft.) 5' /16" ' - 3 1/8" 79 5' - 5 3/16" ' - 2 1/8" (7 ft.) 6' /16" ' - 3 1/8" 79 6' - 5 3/16" ' - 2 1/8" (8 ft.) 7' /16" ' - 3 1/8" 79 7' - 5 3/16" ' - 2 1/8" (9 ft.) 8' /16" ' - 3 1/8" 79 8' - 5 3/16" ' - 2 1/8" (10 ft.) 9' /16" ' - 3 1/8" 79 9' - 5 3/16" ' - 2 1/8" (11 ft.) 10' /16" ' - 3 1/8" 79 10' - 5 3/16" ' - 2 1/8" (12 ft.) 11' /16" ' - 3 1/8" 79 11' - 5 3/16" ' - 2 1/8" 54 *Dimension(s) rounded to the nearest 1/16 with a ± 1/16 (1mm) tolerance. L10 Cable (C) Suspension Detail (Feed location(s) only) L10 Cable (C) Suspension Detail (Non-Feed location(s) only) Outlet box for feed only (by others) Cross bar with 1/4-20 rod and ground screw 2x Outlet box screws (by others) 1/4 x 5 diameter canopy (white) Cord strain relief bushing 1/4-20 Slip ring coupler Feed cord (white) 1/16 Aircraft cable 1/4-20 Threaded Rod (supplied & installed in the field by others) 1/4 x 2 diameter Canopy (white) 1/4-20 Slip ring coupler 1/16 Aircraft cable Chrome gripper Luminaire 2x White cable stay Chrome gripper Luminaire Page 3 of 12

4 Stem Mounting (S & RS) Stem Mounting (S & RS) 1. Ø 5/8 Swivel Stem provides 30 swivel and can be cut in field (48 max. from ceiling to luminaire). 2. Ø 5/8 Rigid Stem is fixed and is not able to be cut/adjusted in field (48 max. from ceiling to luminaire). Nominal Length Swivel (S) & Rigid Stem (RS) Mountings - Dimensions A Housing Length * B (Ref.) End Suspensions C Mid. Suspension D Feed Location Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM 01 (1 ft.) 1' - 5/16" 313 0' - 2 1/8" 54 0' - 8 1/8" 206 0' - 2 1/8" (2 ft.) 2' - 1/4" 616 0' - 2 1/8" 54 1' - 8" 508 0' - 2 1/8" (3 ft.) 3' - 5/16" 923 0' - 3 1/8" 79 2' - 6 1/8" 764 0' - 3 1/8" (4 ft.) 3' /16" ' - 3 1/8" 79 3' - 5 3/16" ' - 3 1/8" (5 ft.) 4' /16" ' - 3 1/8" 79 4' - 5 3/16" ' - 3 1/8" (6 ft.) 5' /16" ' - 3 1/8" 79 5' - 5 3/16" ' - 3 1/8" (7 ft.) 6' /16" ' - 3 1/8" 79 6' - 5 3/16" ' - 3 1/8" (8 ft.) 7' /16" ' - 3 1/8" 79 7' - 5 3/16" ' - 3 1/8" (9 ft.) 8' /16" ' - 3 1/8" 79 8' - 5 3/16" ' - 3 1/8" (10 ft.) 9' /16" ' - 3 1/8" 79 9' - 5 3/16" ' - 3 1/8" (11 ft.) 10' /16" ' - 3 1/8" 79 10' - 5 3/16" ' - 3 1/8" (12 ft.) 11' /16" ' - 3 1/8" 79 11' - 5 3/16" ' - 3 1/8" 79 *Dimension(s) rounded to the nearest 1/16 with a ± 1/16 (1mm) tolerance. L10 Swivel Stem (S) Suspension Detail (feed wires through stem supplied by Selux) Outlet box (supplied & installed by others) 3/8 IP Cross bar with ground screws Pin Hemispherical assembly 1 7/16 x 5 diameter canopy (white) 3/8 IP steel stem (white) Dress nut Luminaire Square nut L10 Rigid Stem (RS) Suspension Detail (feed wires through stem supplied by Selux) 3/8 IP nipple (supplied & installed by others) Outlet box (supplied & installed by others) Square nut Suspension hickey Square nut 1/4 x 5 diameter canopy (white) Canopy securing screw 3/8 IP steel stem (white) Dress nut Luminaire Square nut Page 4 of 12

5 Wall Mounting (W) Nominal Length A Housing Length Wall (W) Mount - Dimensions * B (Ref.) End Suspensions C Mid. Suspension D Feed Location Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM 01 (1 ft.) 1' - 5/16" 313 0' - 6 3/16" 157 NA 0' - 6 3/16" (2 ft.) 2' - 1/4" 616 0' - 3 1/8" 79 1' - 6 1/16" 458 0' - 3 1/8" (3 ft.) 3' - 5/16" 923 0' - 6 1/8" 156 2' - 1/8" 612 0' - 6 1/8" (4 ft.) 3' /16" ' - 6 1/8" 156 2' /16" 894 0' - 6 1/8" (5 ft.) 4' /16" ' - 6 1/8" 156 3' /16" ' - 6 1/8" (6 ft.) 5' /16" ' - 6 1/8" 156 4' /16" ' - 6 1/8" (7 ft.) 6' /16" ' - 6 1/8" 156 5' /16" ' - 6 1/8" (8 ft.) 7' /16" ' - 6 1/8" 156 6' /16" ' - 6 1/8" (9 ft.) 8' /16" ' - 6 1/8" 156 7' /16" ' - 6 1/8" (10 ft.) 9' /16" ' - 6 1/8" 156 8' /16" ' - 6 1/8" (11 ft.) 10' /16" ' - 6 1/8" 156 9' /16" ' - 6 1/8" (12 ft.) 11' /16" ' - 6 1/8" ' /16" ' - 6 1/8" 156 *Dimension(s) rounded to the nearest 1/16 with a ± 1/16 (1mm) tolerance. Wall Mount (W) (Covers a 4x4 or 2x4 J-Box) 4 (102mm) 1. Aluminum wall bracket (by Selux) 2. 4 x4 or 2 x4 J-Box at feed location (supplied and installed by others). 3. 1/4-20 Threaded rod, 1/4-20 lock washer and 1/4-20 nut required to anchor the wall bracket. Mounting hardware supplied and installed to code by others. 4 (102mm) 1 (25mm) 4 15 /16 (126mm) Page 5 of 12

6 Surface Mounting (F) - 1 to 8 Surface Mounting (F) - Over 9 to 12 Nominal Length A Housing Length * B (Ref.) End Suspensions * B1 End Suspensions Surface Mount (F) - Dimensions C Mid. Suspension C1 Mid. Suspension C2 Mid. Suspension D Feed Location Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM 01 (1 ft.) 1' - 5/16" 313 0' - 1 5/8" 41 N/A 0' - 9 1/8" 231 N/A N/A 0' - 4 1/8" (2 ft.) 2' - 1/4" 616 0' - 1 5/8" 41 N/A 1' - 9" 534 N/A N/A 0' - 4 1/8" (3 ft.) 3' - 5/16" 923 0' - 6 1/8" 156 N/A 2' - 1/8" 612 N/A N/A 0' - 2 1/8" (4 ft.) 3' /16" ' - 6 1/8" 156 N/A 2' /16" 894 N/A N/A 0' - 2 1/8" (5 ft.) 4' /16" ' - 6 1/8" 156 N/A 3' /16" 1199 N/A N/A 0' - 2 1/8" (6 ft.) 5' /16" ' - 6 1/8" 156 N/A 3' 914 1' /16" 590 N/A 0' - 2 1/8" (7 ft.) 6' /16" ' - 6 1/8" 156 N/A 3' 914 2' /16" 894 N/A 0' - 2 1/8" (8 ft.) 7' /16" ' - 6 1/8" 156 N/A 3' 914 3' /16" 1199 N/A 0' - 2 1/8" (9 ft.) 8' /16" ' - 6 1/8" 156 0' - 6" 153 3' /16" 1199 NA 3' 914 0' - 2 1/8" (10 ft.) 9' /16" ' - 6 1/8" 156 0' - 6" 153 3' 914 1' /16" 590 3' 914 0' - 2 1/8" (11 ft.) 10' /16" ' - 6 1/8" 156 0' - 6" 153 3' 914 2' /16" 894 3' 914 0' - 2 1/8" (12 ft.) 11' /16" ' - 6 1/8" 156 0' - 6" 153 3' 914 3' /16" ' 914 0' - 2 1/8" 54 *Dimension(s) rounded to the nearest 1/16 with a ± 1/16 (1mm) tolerance. Surface Mount (F) 1. Ø 5/16 Mounting hole drilled at the factory (mounting hardware to code by others). Page 6 of 12

7 Drivers: 0-10V linear dimming (DIM) Luminaires supplied with drivers offering the capability of either normal switched operation or 0-10V dimming for linear dimming curve. Fixtures ship wired for dimming. For on/off functionality, simply cap the dimming leads. Minimum dimming level preset at factory to 1%. (Due to size constraints, 1 luminaires are supplied with a driver from a different manufacturer than 2 and above luminaires. For details, please consult factory.) eldoled SOLOdrive 0-10V linear dimming (DM) Luminaires supplied with SOLOdrive 0-10V dimming driver for linear dimming curve. Minimum dimming level preset at factory to 1%. For dim to dark (down to 0.1%), please consult factory. eldoled SOLOdrive 0-10V logarithmic dimming (DML) Luminaires supplied with SOLOdrive 0-10V dimming driver for logarithmic dimming curve. Minimum dimming level preset at factory to 1%. For dim to dark (down to 0.1%), please consult factory. * For control recommendations for eldoled drivers, please consult eldoled. LUTRON 2-wire dimming (DC2) Luminaires supplied with Hi-lume 2-wire dimming driver programmed for Constant Current Reduction (CCR). For Pulse Width Modulation (PWM) dimming, please consult factory. Minimum dimming level down to 1%. LUTRON 3-wire dimming (DC3) Luminaires supplied with Hi-lume 3-wire dimming driver programmed for Constant Current Reduction (CCR). For Pulse Width Modulation (PWM) dimming, please consult factory. Minimum dimming level down to 1%. LUTRON Ecosystem dimming (DCE) Luminaires supplied with Hi-lume EcoSystem (4 wire, digital link) dimming driver programmed for Constant Current Reduction (CCR). For Pulse Width Modulation (PWM) dimming, please consult factory. Minimum dimming level down to 1%. * For control recommendations and system layout for Lutron drivers, please contact Lutron. Philips Xitanium Sensor Ready DALI dimming (SR) Luminaires supplied with Xitanium SR dimming driver programmed for Constant Current Reduction (CCR). Minimum dim level down to 5%. For use with E and P sensors only. DIM, DM, DML & DMD drivers, and SR drivers Driver Quantity 1 ft. 2 ft. 3 ft. 4 ft. 5 ft. 6 ft. 7 ft. 8 ft. 9 ft. 10 ft. 11 ft. 12 ft. RUN Approximately 1 driver per 4 ft. DC2, DC3, & DCE drivers N/A Consult Factory * For inrush and control current, please refer to driver manufacturers spec sheets. Wiring Diagrams Sensor Wiring Diagrams 0-10V linear (DIM) 0-10V linear eldoled SOLOdrive (DM) 0-10V logarithmic eldoled SOLOdrive (DML) DALI eldoled SOLOdrive (DMD) Philips SR DALI (SR) DIM, DM, DML, DMD & SR DALI DALI standard ENLIGHTED OR PHILIPS SENSOR SR (+) SR (-) PHILIPS XR SENSOR SWITCH ELDO 0-10V (+) (-) 0-10V AUX (+) AUX (-) Page 7 of 12

8 Fuse (FS) - Fusing, luminaires supplied with a in-line fuse located on the hot wire for each feed. (supplied with an 8A slow burn fuse). Damp Location (DL) - Luminaires are suitable for use in damp location(s). Examples of such locations include protected areas under canopies, marquees, roofed porches, and similar locations where the fixture(s) are protected from direct contact with rain, snow, or excessive moisture (such as ocean spray). Interior locations include areas subject to moderate degrees of moisture, such as basements and certain barns and cold storage buildings. All solder points on LED boards are conformal coated. The phosphor layer of the LEDs is free of coating to avoid hazing. Separate Switching (SS) - Luminaires available with separately switched 4 (nominal) sections starting at 7 and up. Luminaire is intended to be wired to the same panel/breaker (not intended for Emergency use). - To specify this option, the number of separately switched sections and locations of these sections must be provided at time of order. * If the project requires different separate switching than outlined above please consult the factory. *For Separate Switching with sensors, please consult factory. *For Damp Location with sensors, please consult factory. Emergency Circuit (EC) - Luminaires with EC option compliant to UL 924 listed emergency luminaire. EC luminaires are intended to be wired to separate panels/breakers for emergency use. - For 1 to 6 nominal luminaires, the entire fixture is wired for operation on emergency circuit. - For 7 and up nominal luminaires, the first 4 nominal length is wired for operation by a separate EM circuit by default to meet the required Life Safety Code (NFPA 101). *If a different configuration is needed please consult the factory. *For EC with sensors, please consult factory. Joiner System - standard for Runs and Configurations Page 8 of 12

9 Sensor Ordering Chart Quantity Sensor Settings * x Number of Sensors E Enlighted FS-D22 P Philips Easy Sense SNS102 S Sensor Switch MSD EZ 1 Daylight 2 Occupancy/Vacancy 3 Daylight/Occupancy/Vacancy * Settings not available with Enlighted Enlighted FS-D22 (E) Occupancy/vacancy, daylight harvesting, plus the Internet of Things (IoT) data collection and reporting. For full details, please see FS-D22 spec sheet on the Enlighted website. Must be paired with Philips Xitanium SR driver (SR driver selection). Commissioning by Enlighted. *Please contact Enlighted for complete details prior to specifying. *Sensor can control up to 4 drivers. Please refer to driver quantity chart on page 7. Multiple sensors may be required for longer lengths. Philips EasySense SNS102 (P) Occupancy/vacancy and daylight harvesting. Sensor can be programmed on-site via NFC or IR using Android app only, by others. For full details, please see the SNS102 spec sheet on the Philips website. Must be paired with Philips Xitanium SR driver (SR driver selection). Wall dimming via wireless wall switch from Philips/Illumra ( **Please contact Philips for complete details prior to specifying. *Sensor can control up to 10 drivers. Please refer to driver quantity chart on page 7. Multiple sensors may be required for longer lengths. Sensor Switch MSD EZ (S) Occupancy/vacancy and daylight harvesting. For full functionality and programming options, select settings option 3. If a different settings option is selected, other settings may be unavailable. For full details, please see MSD EZ spec sheets on the Sensor Switch website. Must be paired with eldoled 0-10V driver (DIM driver selection). Manual control of dimming not available with MSD EZ sensor. *Please contact Sensor Switch for complete details prior to specifying. *Sensor can control up to 30 drivers. Please refer to driver quantity chart on page 7. Multiple sensors may be required for longer lengths. Occupancy Vacancy Daylight Harvesting Driver Compatibility Enlighted FS-D22 (E) See Enlighted s website for full capabilities SR Philips EasySense SNS102 (P) SR Sensor Switch MSD EZ (S) DIM Factory Presets - Sensors come from the sensor manufacturer with factory presets for each of the settings in above chart. Please see sensor manufacturers spec sheets for details on presets and re-programming. Commissioning - Commissioning of sensors and installation by others. Contact sensor manufacturer for details and costs associated with commissioning the system prior to specification of sensors. Standard Sensor Placement - for other placement options, please consult factory. For functionality and limitations, please see sensor details above. Qty 1 Sensor - Beginning Qty 2 Sensor - Beginning and End (9 fixtures and longer) Lit Section* Fixture Length 3 (76mm) Qty 3+ Sensor - For spacing between sensors, please consult the sensor manufacturer 3 15 /16 (100mm) Beginning of Run Lens Aluminum Sensor Plate -to be painted same as fixture unless specified otherwise Notes: 1. For spacing between sensors, please consult the sensor manufacturer. 2. Exact sensor placement and coverage will be defined by approved factory drawing. 3. Sections controlled by sensors may not be symmetrical - consult factory for layout. * Lit section will be the fixture length minus 3 for sensor plate. Page 9 of 12

10 Standard Direct shapes/configurations: Listed below are the minimum lengths and details for standard shapes. These standard shapes can be combined with each other and/or the standard luminaire lengths, ensuring full even illumination. If you have any questions, please consult the factory. The minimum standard lengths for L shapes: - IL90 or V90 open shapes is 4 x 4 nominal (example: leg, 90, leg) - IL90 or V90 closed shapes is 6 x 6 nominal (example: 90, leg, 90) ( Exception is that the IL90 & V90 s can be joined directly to provide a 4 x 4 nominal shape) The minimum standard lengths for T & X shapes: - IT90 = 4 nominal on the short leg and 8 nominal on the long side - IX90 = 8 nominal for either direction *For sensors in configurations, please consult factory. Project Specific Direct shapes/configurations: Selux is capable of supplying a wide range of project solutions including different shapes, angles, and sizes to meet the project requirements. Due to the complex nature of these project specific layout(s) we ask that you please consult the factory with the project requirements for review. Direct Lit Corner and Section - Dimensions IL90 V90 IT90 IX90 Feet/Inch MM Feet/Inch MM Feet/Inch MM Feet/Inch MM A Housing (Outside) 2' - 2 1/16" 662 A1 Housing (Inside) 1' /8" 562 B Housing (Outside) 2' - 3 1/2" 698 B1 Housing (Inside) 1' /2" 597 C Housing 2' - 2 1/16" 662 * C1 Ref. 2' - 1/8" 612 D Housing 4' - 3/16" 1224 * D1 Ref. 2' - 1/8" 612 E Housing 4' - 3/16" 1224 * E1 Ref. 2' - 1/8" 612 *Dimension(s) rounded to the nearest 1/16 with a ± 1/16 (1mm) tolerance. Page 10 of 12

11 Photometry LW Optics / 34W LED / 4000K CCT Link to photometry (IES & PDF files) Catalog #: L10-1B35-40-LW-04-XX-UNV Report #: Delievered Lumens: 2822 Input Watts: W Efficacy: 83 Power Factor: Total Harmonic Distortion: 9.30 CCT: 4000K CRI: 95.7 Max Candela: from Vertical Spacing Criterion (0-180): 1.28 Spacing Criterion (90-270): 1.24 Spacing Criterion (Diagonal): 1.38 Maximum Candela = 1014 Located At Horizontal Angle = 0, Vertical Angle =.5 # 1 - Vertical Plane Through Horizontal Angles (90-270) # 2 - Vertical Plane Through Horizontal Angles (0-180) 1 2 MI Optics / 34W LED / 4000K CCT Link to photometry (IES & PDF files) Catalog #: L10-1B35-40-MI-X-04-XX-UNV Report #: Delivered Lumens:2963 Input Watts: W Efficacy: 87 Power Factor: Total Harmonic Distortion: 9.30 CCT: 3950K CRI: 95.7 Max Candela: 1 from Vertical Spacing Criterion (0-180): 1.22 Spacing Criterion (90-270): 0.88 Spacing Criterion (Diagonal): 1.04 Maximum Candela = 1959 Located At Horizontal Angle = 0, Vertical Angle = 1 # 1 - Vertical Plane Through Horizontal Angles (90-270) # 2 - Vertical Plane Through Horizontal Angles (0-180) 1 2 Page 11 of 12

12 Photometry L100 Photometry Multiplier Table CCT Multiplier 4000K 3500K 3000K 2700K Light Engine Multiplier Light Engine Lumens Wattages 1B B B B B B Lens Multiplier LW MI CCT and CRI multipliers apply to the photometry, IES files, and per foot values listed on page one (light engine). Light engine multiplier supplied for per foot values listed on page one (light engine). Page 12 of 12